How to manually reset the maintenance lamp to 50

1. Press the Menu button on the lever.

2. Select "Vehicle Information Menu".

3. Turn the adjusting wheel to select "Oil Life". If you do not do maintenance to the number of kilometers, then the maintenance light will be on, after the maintenance, the service station will help you reset the maintenance light to zero, start to record the mileage, and prompt when the next maintenance kilometers.

Press the house button behind the gear lever Rotate the multi-function button to find the app Press down to confirm Rotate to maintenance oil reset Time reset is ok.

Navigate the control buttons, find the app, and there is maintenance reset inside.

1. The first choice is to start the Changan Mazda Ankesaila vehicle, and press the start button of the vehicle.

2. Next, press the information switch button on the steering wheel of the Mazda Ankesaila vehicle.

3. Next, press the SET button on the steering wheel of the Mazda Ankesaila vehicle, as shown in the figure below.

Summary. Pro, how to eliminate Mazda's maintenance lights: 1. Start the vehicle 2. Find the info button on the left side of the multi-function steering wheel and press it, and press the set button in the left control button of the direction with your right hand.

3. At this time, the LCD screen displays vehicle maintenance information. 4. Finally, press the OFF button at the bottom right of the steering wheel, and the maintenance light will be eliminated.

Pro, how to eliminate Mazda's maintenance lights: 1. Start the vehicle 2. Find the info button on the left side of the multi-function steering wheel and press it, and press the set button in the left control button of the direction with your right hand. 3. At this time, the LCD screen displays vehicle maintenance information.

4. Finally, press the OFF button at the bottom right of the steering wheel, and the maintenance light will be eliminated.

Turn on the ignition switch first, press the control lever menu button, then select "Vehicle Information Menu" in the menu, after entering the vehicle information menu, turn the adjustment wheel to select the "Oil Life" option, select Reset, and you can complete the reset of the maintenance light. Mazda was the first automaker in the world to mass-produce rotary engines, and also won the only overall championship of an Asian car company in the world's most demanding 24 Hours of Le Mans. With the spirit of perseverance in challenging and overcoming many difficulties, the new generation of "SKYACTIV" technology and the "Soul of Motion" design theme also demonstrate this challenger spirit that is not afraid of hardships and dangers.

Mazda car Ming lease Ankesaila maintenance lamp removal method.

1. Running the module.

2. Use the conversion function key of the car steering wheel to convert the dashboard display to the maintenance setting.

3. After pressing the "trip" button for 5 seconds, the maintenance alarm light can be cleared. Where's it.

Mazda cars other models Bao Li Huai sedan lamp cleaning method one.

1. Running the vehicle.

2. Find the info function key on the left side of the steering wheel of the multi-purpose car and press it, and at the same time press the set function key in the left control function key of the lower position with the right hand.

3. At this time, the middle LCD screen shows the content of vehicle maintenance information.

4. Finally, press the OFF button in the lower right corner of the steering wheel of the car, and the maintenance light will be cleared.

Mazda other models of maintenance lights clear method two.

1. Control the knob of the car machine.

2. Select "Vehicle Information Content Menu Bar".

3. Rotate the adjustment wheel to select "oil life" and click on the maintenance mileage in the menu to clear to zero.

Mazda other models maintenance light removal method three.

1. Turn off the car engine and remove the key.

2. Press the mileage reset lever in the dashboard of the car.

4. At this time, you don't have to let go, turn the key with your right hand to ignite.

5. The pale yellow wrench-like maintenance lamp fades, and the maintenance lamp is reset to zero.

The flashing of the maintenance light indicates that the maintenance room of the vehicle has reached a certain period and needs to be serviced immediately. There are some models that can only be operated on a model-specific computer, and the manual type cannot zero the maintenance lights.

The equipment life of the vehicle is much longer than before. However, there are some important maintenance tasks that need to be carried out so that the safety of the vehicle can be ensured. In difficult situations, such as driving in cold or dusty terrain, it is necessary to carry out vehicle maintenance early, even before the maintenance room arrives.

Millions of car purchase subsidies.

Mazda Oncorsila repair lamp cleaning method.

1.Start the engine.

2.Use the steering wheel's on/off button to switch the vertical display to the maintenance setting.

3.After pressing the "trip" button for 5 seconds, the maintenance alarm light can be canceled.

Method 1 of removing service lights from other Mazda models

1.Start the vehicle.

2.Find the info button on the left side of the multifunction steering wheel and press it, while pressing the set button on the left side of the steering wheel with your right hand.

3.At this time, the LCD screen displays vehicle maintenance information.

4.Finally, press the close button on the bottom right of the steering wheel and the service light will disappear.

Method 2 to remove the service lights of other Mazda models

1.Control knobs.

2.Select the Vehicle Information Menu.

3.Turn the adjustment wheel to select "Oil Life" and click Service Mileage Reset in the menu.

Method 3 of the repair lights of other Nawang Mazda models

1.Turn off the engine and pull out the key.

2.Press the mileage zeroing lever in the dashboard.

4.Don't let go at this time. Turn the key with your right hand to ignite.

5.The yellow wrench-shaped service light disappears, and the service light resets to zero.

The maintenance light is lit to indicate that the maintenance time of the vehicle has reached for a cycle and needs to be repaired in time. Some models can only be operated by a vehicle-specific computer, and the maintenance lights cannot be manually zeroed.

Although the mechanical life of the vehicle is longer than before. However, some necessary maintenance work still needs to be carried out in order to ensure the safety of the vehicle. In difficult operating conditions, such as driving in cold or dusty areas, vehicle maintenance should be carried out in advance, even before maintenance time.

Millions of car purchase subsidies.

How to clear the Mazda Onkesaila maintenance light? Mazda Onkesaila ( Check price |.)How to clear the maintenance light? The removal method of Mazda Onxera maintenance lamp is as follows:

1. Start the engine. 2. Use the switch button of the steering wheel to switch the instrument display to the maintenance setting. 3. After pressing the "trip" button for 5 seconds, the maintenance alarm light can be eliminated.

The following are the relevant knowledge points about maintenance: 1. The light of the maintenance light indicates that the maintenance time of the vehicle has reached for a cycle and needs to be maintained in time. Some models can only be operated by a dedicated computer for the model, and the maintenance lights cannot be reset to zero manually.

2. Although the mechanical life of the vehicle is longer than before. Some necessary maintenance work still needs to be carried out, so that the safety of the vehicle can be guaranteed. In difficult conditions of use, such as driving in areas with severe cold or high dust, it is necessary to maintain the vehicle in advance, even if the maintenance time has not yet arrived.

Manual zeroing process of the new Ankesaila maintenance lamp:

1.Preferably Press the one-button start button of Onkesaila.

2.Then press the info button on the left side of the steering wheel of the MPV, and then press the set function key on the right side of the steering wheel of the car.

4.At this time, the LCD screen in the middle shows the content of the car's maintenance information.

5.Finally, press the OFF button in the lower right corner of the car's steering wheel and the small wrench will clear.

Manual zeroing process for old Ankesaila maintenance lights:

1. Press the Menu button on the adjustment lever.

2. Select "Car Information Menu Bar".

3. Rotate the adjusting wheel to select the "oil life", and then reset it to zero and you're done.

If there is no maintenance to the kilometer, then the maintenance light will be on, after the maintenance, the service point will help you reset the maintenance light to zero, gradually record the driving mileage, and remind you when the next maintenance kilometer. If you don't go to the service point, you can also zero the maintenance lamp by yourself, and follow the instructions for use to actually operate. If it doesn't go to zero, then you won't be able to record the mileage you maintain.