What kind of oil does the computer add to the CPU fan?

It is a special oil for computer lubrication. If not, generally use sewing machine oil, do not use other oils, there are too many impurities.

Some fans can, some are disposable, balls can, some are ceramic, it is recommended that you replace them, otherwise you don't know when the fan strikes, and then the CPU or graphics card hangs up.

First, it is a special oil for computer lubrication. If not, generally use sewing machine oil, do not use other oils, too many impurities, buy special oil to sell computer accessories and consumables, buy sewing machine oil to go to the hardware department store Second, the method of filling lubricating oil 1, disassemble the host can take out the CPU fan or not take out. The fan has a logo tag on it, which can be uncovered using a knife-like tool.

2. Uncover the logo label and fill the lubricating oil.

What bearings need to be distinguished. If it is an oil-impregnated bearing that can be removed, it can be greased, commonly known as butter.

If it is a ball bearing, the oil is added, and the label is not distinguished.

Tear off the sticker and drop a few drops of sewing oil, or ordinary oil. If the fan blades don't rotate smoothly due to the lubricating oil drying out, the problem can be solved, and that's what I did. By the way, remove the dust from the fan blades and radiators. FYI.

As far as the description is concerned, just the engine oil, the kind that gives the bicycle some oil, one drop or two drops is enough, not more. Not so much detailed.

I don't know how to continue asking, satisfied.

CPU fans generally can't add lubricating oil by themselves, just replace them with a new fan.

I added a solid high-temperature grease <>

It is a special oil, we use it ourselves, generally use sewing machine oil, do not use other oils, there are too many impurities, buy special oil to sell computer accessories and consumables, buy sewing machine oil to go to the hardware department store.

First, it is a special oil for computer lubrication. If not, generally use sewing machine oil, do not use other oils, there are too many impurities, buy special oil to sell computer accessories and consumables, buy sewing machine oil to go to the hardware department store.

Second, the method of filling lubricating oil.

1. Disassemble the host to take out the CPU fan or not. The fan has a logo tag on it, which can be uncovered using a knife-like tool.

2. Uncover the logo label and inject oil, gently drag the fan shaft up and down to rotate, so that the oil invades the inside of the bearing.

Precautions: Be careful not to tear off the line.

After running the computer for a while, there will be a buzzing sound in the box when it is first turned on, and it will return to calm after a few minutes. People generally don't pay much attention to this problem, and some people will shoot the case a few times to reduce the noise, and they don't think about it. In fact, this is a manifestation of the lack of oil in the CPU fan or power supply fan, which is very detrimental to the safe operation of the computer.

Let me teach you how to oil the CPU fan of the computer.

Open the case and see that the CPU fan is covered in dust!

When you take the fan apart, you can see that the fan blades and fins are covered with dust. At this time, you should find a brush to clean the dust from the heat sink and the dust from the fan blades.

Remove the plastic film from the bottom of the fan. Note: Do not uncover all of them, just expose the bearing (yellow part), it is not easy to stick it after all of them are uncovered.

Dip a little oil and carefully drip it onto the fan bearings.

Note: Three or five drops are enough, not too much, too much will overflow to the outside, sticky, but sticky dust.

In addition, if the oil is spilled, it will be difficult to put the plastic film on again.

In addition, every drop of oil rotates a fan blade several times to make the added lubricating oil infiltrate the bearing.

If you look closely, you can see that the bearing is already full of lubricating oil.

After adding oil, wipe it clean with paper and then attach the plastic film.

If the fan can be removed, you can see a sticker on the back of the fan, remove it to see the fan shaft, drop two drops of sewing oil into it, it is best to remove the shaft lock plate, take out the fan blades to clean up the dirt, the effect is better.

CPU fans recommend that you change to a cheap one. Refueling yourself may lead to damage to your CPU or more troubles Just buy a fan without a base, it's only a few dollars And it's easy to stick to the ash with oil CPU big fan super screen 3 looks beautiful, and the fan thermal effect and noise are good in all aspects30rmb buy safe buy rest assured and save trouble.

You can do it yourself, use a special electric fan lubricating oil to drop a few drops to remove rust coolly, smooth.

Most of the well-known electric fan factories such as Beriaco use fully synthetic electric fan lubricants from Hotolube or Kluber. Fully synthetic base oil production, clear and transparent, colorless and odorless, low temperature resistance, no dust. Tao Feng has a 120ml white sharp mouth small oil bottle, just drop a few drops, easy to use.

It is not advisable to use ordinary engine oil and butter, which volatilize quickly in summer and will have an unhealthy smell.

Yes, neither do mine. The fan is small, no! But there is one on the power supply!