Can the DJI RSC2 Gimbal be used on mobile phones?

Theoretically no, SC uses mirrorless and mirrorless cameras.

Target. But so it is. You can still try.

The following mode needs to be implemented by image transmission and APP.,Of course, I want to confirm whether the following mode you mentioned is the author's mode.。 If so, it needs to be implemented through APP and video transmission equipment.

When the image transmission link is successful, the mobile phone will be used as a monitor, and you can also select people or other moving target objects on the mobile phone screen, and you can realize intelligent tracking.

There are also several smart shooting modes that can be learned, such as time-lapse.

Trajectory video panoramic shooting and so on need to be achieved with the help of the app, but it can also be carried out without image transmission equipment, but you need to customize the waypoint in the APP, to determine the vision of your own shooting, shooting interval, duration, etc., of course, these ways of playing are mainly auxiliary, if you want to create a good work, you need more creative ideas and post-editing capabilities of the user.

I hope the above can answer the subject's doubts, if you need more detailed operations, you can understand the author's previous evaluation content.

DJI RS 2, DJI RSC 2, Ronin SC, Ronin S] Ronin devices can be connected to your phone via Bluetooth to use the features in the Ronin app

1.Press and hold the power button to turn on the gimbal.

2.Turn on the Bluetooth function of your phone.

What models does the DJI Stabilizer RSC3 work with? SC3's camera pie Sony: Sony A9, Sony A6400, Sock Slip Sony A7R3, Sony A7M3, Sony A7R2, Sony A7S2, Sony A7M2, Sony A7S, Sony A7, Dusty Sony A6500, Sony A6300, RX100 V Nikon:

Nikon Z6, Nikon Z7 Canon: Canon EOS R, Canon M50 Panasonic: Panasonic GH5, Panasonic GH5S, Panasonic G9, Panasonic GH3, Panasonic GH4 Fujifilm:

Fujifilm x H1, Fujifilm x T2, Fujifilm x T3

Summary. Dear, I'm glad to answer for you, the reasons for the poor control effect of the DJI RS2 stabilizer are: 1

Extreme environmental conditions, such as excessive wind speed or ground turbulence, make the dynamic range of the gimbal unable to keep up with the movement, resulting in poor control. 2.It is due to impatience or mistakes during shooting that lead to inappropriate posture, and quickly start or stop the camera.

3.It's because the gimbal doesn't match the camera, the camera is too heavy or light, or it's not loaded in a stable way. 4.

It is also the failure of the software or hardware of the device, which makes the performance worse. <>

<> DJI RS2 gimbal is old and has poor control effect.

Dear, I'm glad to answer for you, the reasons for the poor control effect of the DJI RS2 stabilizer are: 1Extreme environmental conditions, such as excessive wind speed or ground turbulence, made the dynamic range of the gimbal unable to keep up with the movement, resulting in poor control efficiency.

2.It is because of the impatience or mistake during the shooting, which leads to an inappropriate posture, a quick start, or a person who is disgusted with the camera stops. 3.

It's the gimbal that doesn't match the camera, the camera is too heavy or too light, or the waiter shouts that the loading method is not stable enough. 4.It is also the failure of the software or hardware of the device, which makes the performance worse.

<> dear kiss, to expand for you, the solution to the poor control effect of the DJI RS2 stabilizer is: 1According to the instructions of the gimbal device, understand the applicable environment and working origin of the hail stabilizer, and try to choose a relatively stable shooting location and shooting conditions.

2.Try to adjust the gimbal parameters and posture, adjust the balance level, adjust the movement parameters and direction to get better control. 3.

If you find that the camera is not installed stably during the application, check the installation method of the camera and adjust it correctly according to the gimbal manual. 4.Poor control continues to occur, consult with the equipment maintenance company to resolve the corresponding hardware and software issues.

<> none of these exist.

If the above reasons do not exist, you can check the following: 1Insufficient electrical energy, the stabilizer needs a lot of power support, and the lack of sufficient power supply will lead to poor control effect.

2.The gimbal parameter setting is inappropriate, and the appropriate setting parameter is an important way to improve the control effect of the gimbal device, if the setting is incorrect, the control effect will be affected. 3.

Mechanical failures of the gimbal system, including motor and solder failures, can lead to a decrease in the effectiveness of the gimbal control. 4.Gimbalizer firmware issue:

Firmware issues with the gimbal can also cause the gimbal to be poorly controlled, resulting in delayed or unstable control. In response to these problems, the solution to Fang Hongju's case is as follows: First, make sure that the stabilizer has sufficient power supply**, and try to choose a high-quality battery or charger.

For the problem of improper parameter setting, it should be adjusted according to the equipment manual and actual use. In the event of a mechanical failure, it is recommended to send the stabilizer to an official repair center or a qualified third-party repair organization for repair and testing. If there is a problem with the gimbal firmware, you can try to upgrade the firmware or contact the official customer service to solve it.

Summary. The DJI RS3 gimbal keeps showing poor control and may be due to several reasons:1

Attitude Calibration Problem: If the gimbal is not properly calibrated, it will affect its control and cause poor stability. Make sure to do an accurate attitude calibration to improve control.

2.Flight environment limitations: If the stabilizer is operated in a complex flight environment, such as strong winds or interference, it will also affect the control effect.

Try to choose a better flight environment and pay attention to avoid the influence of interference, which can improve the operation effect of the gimbal device. 3.Attitude Adjustment Settings:

It may be that the attitude adjustment settings of the gimbal are not accurate or appropriate enough, resulting in poor control. You can try to adjust the attitude parameters of the gimbal to adapt to different flight needs and further improve the control effect of the gimbal . Please note that these are only some of the possible causes, and specific issues may require further debugging and troubleshooting.

It is recommended to consult the user's manual of the device or consult the manufacturer's customer service department for a more accurate solution. Hope it helps!

The DJI RS3 gimbal keeps showing poor control and may be due to several reasons:1Attitude Calibration Issues:

If the gimbal is not calibrated correctly, it will affect its control and lead to poor stability. Make sure to perform accurate attitude calibration to improve the delay control effect. 2.

Flight environment limitations: If the gimbal is operated in a complex flight environment, such as strong wind or interference, it will also affect the control effect. Try to choose a better flight environment and pay attention to avoid the influence of interference, which can improve the operation effect of the stable digging sun-dinger.

3.Attitude adjustment settings: It may be that the attitude adjustment settings of the gimbal are not accurate or appropriate enough, resulting in poor control effect.

You can try to adjust the attitude parameters of the gimbal to adapt to different flight needs and further improve the control effect of the gimbal . Please note that these are only some of the possible causes, and specific issues may require further debugging and troubleshooting. It is recommended to consult the user's manual of the device or consult the manufacturer's customer service department for a more accurate solution.

Hope it helps!

You've done a great job! Can you elaborate on that?

The DJI RS3 gimbal shows poor control due to the following reasons:1Attitude Calibration Issues:

Make sure to do an accurate attitude calibration to improve control. 2.Flight environment restrictions such as teasing:

Try to choose a good flight environment and take care to avoid the influence of interference. 3.Attitude Adjustment Settings:

Try to adjust the attitude parameters of the gimbal to suit different flight needs. Please refer to the user manual or consult the customer service department of the manufacturer for a more accurate solution. Hope it helps!