Xiali N5 belt abnormal sound, it s okay if it doesn t rain, when it rains, it rings when driving, as

Hello! It is recommended that you go to the repair shop to adjust the tightness of the lower belt, it may be too loose, and the rain will throw it on the top of the belt on a rainy day to cause slipping, I hope it can help you, I wish you a pleasant time! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, this is the aging of the belt, you can see if the belt is good, whether there are cracks, if it is good, you can tighten the belt a little, there is no sound, I hope it will help you [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

It may be necessary to replace the belt, which may be caused by the loosening and aging of the belt. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, the belt is slippery, tighten it a little, or replace it, I hope mine is helpful to you, thank you for your support to the car master, I wish you a pleasant ...... journey[If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, the belt is splashed with water, so it rings, and the current weather do not pull the handbrake to prevent the handbrake line from not returning. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, it is mainly caused by the loose belt, and it will slip when there is water flying up on a rainy day. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, I suggest you replace the belt It is estimated that the belt is aging, I hope it will help you [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Check the tightness of the belt, whether it is aging, and replace it after more than 40,000 kilometers! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, it is recommended that you tighten the belt. No, only replace the belt. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Replace the belt and try it [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

In most cases, the belt is loose, in this case, it is best to go to the repair shop to adjust the belt tension, because the belt will produce a screaming sound when the belt slips, once the belt slips, the belt will be further elongated due to the friction and high temperature, and the slippage will be more serious, and it will enter a vicious circle. Therefore, timely adjustment of belt tension is the key.

On the issue of abnormal noise, it is difficult for ordinary car owners to distinguish which ones are fault abnormal noises and which ones are reasonable abnormal noises. Only nearly 20% of the vehicles that went to the repair shop to detect abnormal noises really had problems. Models equipped with turbocharged engines are different; Models with engine guards may also make noises due to friction; After some car owners come into contact with different cars, it is likely that due to their lack of understanding of mechanical knowledge, they mistake reasonable abnormal noise as a vehicle failure.

Therefore, learn to distinguish the abnormal noise of the car and avoid wasting time and energy.

How to identify the sound of a car:

In practice, due to the limitations of working conditions, it is difficult to measure the sound of the car with special instruments, and the sound of the car can only be described and compared with the judgment of the sound in daily life. For example, the dry friction of the bearing makes a "rattling" sound like the source, and the "clicking" sound of a small hammer hitting the cement floor is made by excessive valve clearance.

1. Correctly distinguish between normal and abnormal sounds.

The vibration of each mechanism in the work of the car will emit a variety of sounds, but the sound does not mean that the car has a beam barrier, in order to avoid unnecessary disassembly, we must first distinguish between normal sound and abnormal sound. The normal vibration sound of each system component (such as the noise on the surface of the engine), the impact sound of the gear when shifting, the air intake sound and exhaust sound of using gas as the working source, and the gear meshing noise are all normal sounds. Abnormal noise (abnormal noise) can be divided into slight noise, general noise and malignant noise according to the impact on the performance of the car.

Slight noise, such as the flashover sound of high-voltage electric leakage, the slight loose sound of rolling bearings, etc., the general volume is small, the degree of wear of the parts is not large, and there is no significant change for a long time, and this kind of fault can still maintain the normal operation of the car without repair. Slag flammable state.

3. When diagnosing abnormal noise, attention should be paid to creating good auscultation conditions and trying to eliminate the interference of other noises, so as not to affect the accuracy of judgment.

The sound is amplified at the most position, or the sound is reduced by using a single cylinder fire off to meet the needs of diagnosis. The auscultation site should be kept quiet to minimize human interference.