vivo TWS Earphone one earphone display can t be connected?

The Bluetooth headset can be connected wirelessly, as long as it is connected, you can listen to songs or make calls through the Bluetooth headset. If you can't connect, you can't listen. So what's the matter if the Bluetooth headset can't be connected? What's wrong with the Bluetooth headset not being connected.

1The reason why the bluetooth earbuds will not be connected is mainly due to the fact that they are not set up, at this time, open the lid of the charging case first, and put the earbuds separately in the left and right ear chambers, when you see the indicator light flashing slowly, it means that there is still electricity in the charging case.

2At this time, close the lid of the earphone, indicating that the compartment is charging the earphone, then take out the mobile phone and pair it with the Bluetooth connection on the earphone, press and hold the back of the earphone, and then take out another earphone and connect it to the mobile phone.

3. If the earphone is faulty or the line at the interface is broken, it will also cause the Bluetooth headset to be unable to connect, at this time, the earphone can be sent to the local repair shop for inspection and processing, and if it is not possible, you can consider replacing it with a new one.

1. If the Bluetooth headset can't be connected, it may be that the Bluetooth headset has not entered the pairing mode.

2. Solution: There will be a function button on the Bluetooth headset, this multi-functional button has a function is to match the device and the Bluetooth headset, when connecting with the mobile phone, you need to press and hold this function key, and at the same time you need to open the Bluetooth function of the mobile phone to search, click after seeing the corresponding earphone name, and confirm the pairing to connect.

The mobile phone cannot be connected to the wireless Bluetooth headset to use, you can deal with it as follows:

1. Put the two earbuds into the charging case and close the lid, then reopen the lid to connect.

2. Enter the Bluetooth settings page of the mobile phone, in the paired device, cancel the pairing of the earphones, after canceling the pairing, then put the earphones into the charging case and open the lid of the case, press and hold the function button for 2 seconds, when the white light of the indicator light continues to flash, the earphones will enter the pairing state, and check whether they can be connected and used after pairing;

3. Put the earbuds into the charging case, keep the charging case open, and then press and hold the function button on the charging case for 15 seconds until the orange light flashes rapidly and release the button, at which point the earbuds will be restored to factory settings.

After the factory reset is completed, the earbuds will automatically enter the pairing state, and check whether they can be connected and used after pairing;

4. If the earbuds still cannot be connected after operating the above methods, you need to go to the vivo customer service center for testing and processing.

Go and select your current city to get it. , in advance, consult the staff of the center, ensure that the staff go again during normal working hours, avoid empty running, and pay attention to safety on the way to and from the center.

The mobile phone cannot be connected to the wireless Bluetooth headset to use, you can deal with it as follows:

1. Connect the earbuds to the charger, charge them for 15 minutes, and then try to connect them again.

2. Put the two earbuds into the charging case and close the lid, then reopen the lid to connect.

3. Enter the Bluetooth settings page of the mobile phone, in the paired device, cancel the pairing of the earphones, then put the earphones into the charging case and open the lid of the case, press and hold the function button for 2 seconds, when the white light of the finger Huisun shows the rise of the simple light continues to flash, re-pair the earphones and check whether they can be connected and used;

4. Put the earbuds into the charging case, keep the charging case open, press and hold the function button on the charging case for 15 seconds until the orange light flashes rapidly and release the button when the front laughing chain, after restoring the earbuds to factory settings, the earbuds will automatically enter the pairing state to see if they can be connected and used;

5. If the earbuds still cannot be connected after operating the above methods, please bring the device to the vivo customer service center.

Detection processing.

Summary. 1. One-key flash connection (compatible model): When the Bluetooth of the mobile phone is turned on, keep the mobile phone screen always on, put the earbuds close to the mobile phone and open the charging case, the mobile phone will have a pop-up window pairing prompt, and you can quickly complete the pairing connection by following the prompts.

2. Normal pairing (other models): Open the charging case, press and hold the function button for 2 seconds until the indicator flashes white, and the earbuds enter the pairing state (the earbuds will automatically enter the pairing state when they are newly factory restored). At this time, open the Bluetooth settings interface of your phone, search for the device name, and then select and connect.

vivo bluetooth headset TWS2E is not connected how to find the headset.

Please I'll sort out the answer later, and I'll get back to you later, thank you for your understanding! Thank you!!

1. One-key flash connection (compatible models): When the Bluetooth of the mobile phone is turned on, keep the mobile phone screen always on, put the earbuds against the Danlu to the mobile phone and open the charging case, the mobile phone will have a pop-up window pairing prompt, and you can quickly complete the pairing connection by following the prompts. 2. Ordinary pairing (other models):

Open the charging case, press and hold the function button for 2 seconds until the indicator flashes white, and the earbuds enter the pairing state (the new factory reset of the earmold machine will automatically enter the pairing state). At this time, open the Bluetooth settings interface of your phone and search for the device name vivo TWS 2E, select and connect to it.

I can't find my headphones, they don't connect, how can I find them?

TWS Earphone wireless Bluetooth headset does not support location finding, TWS Neo TWS 2 series supports finding the location of the earphone and can bend and dig through ** sound to find the earphones that have fallen or forgotten them.

I'm vivotws2e

You can locate it in the settings.

I don't remember where I put the headphones, and they are not connected to my phone at the moment, how can I find them?

Don't you usually use these headphones? If you have a normal connection, you can locate it.

Unbound"? That's probably not going to work, you can't link to it, and you don't have a targeting.

Summary. Extended content:vivo+TWS+2E The right ear cannot be connected can be handled like this:

Please put the left and right earbuds into the charging case first, keep the lid of the charging case open, and then press and hold the function button on the charging case for about 15 seconds until the indicator shows orange and flashes rapidly, and the earbuds have been restored to factory settings. After the factory reset is completed, the earbuds will automatically enter the pairing state, and the indicator light will show white and flash continuously. vivo wireless sports headphones:

You can factory reset by pressing and holding the volume + key and the volume - button of the earphones at the same time for about 3 seconds. The above operation still cannot be connected to the right earphone for use, you can bring the earphone packaging box and earphones, and go to the service center for testing and maintenance!

vivo + TWS+2e why can't the right ear be connected.

Hello dear! I'm glad you asked, why can't the right ear connect to vivo+tws+2e.

Dear, there are several possible reasons why the right ear of vivo earphones TWS2E cannot be connected: 1. Running out of power: Bluetooth headphones are powered by batteries.

If the battery is dead, or the battery is damaged, it will often disconnect automatically. 2. The interference source is too strong: the Bluetooth headset works at the frequency of the state air, and there are wifi routers, cordless ** and rat loss parallel standards at this frequency.

These are relatively strong sources of interference. 3. The quality of the earphones is not good, especially the refurbished headphones, which are just bought normally, and there will be problems after a period of time. 4. Bluetooth headset compatibility issues:

Some Bluetooth headsets, used on other brands of mobile phones, sometimes disconnect automatically.

Extended content: vivo+TWS+2E can not connect the right ear can be treated with this respectful treatment: Please first put the front combustion spirit of the left and right Huiyin earbuds into the charging case, keep the charging case open, and then press and hold the function button on the charging case for about 15 seconds, until the indicator shows orange and flashes quickly, release the button, and the earbuds have been restored to factory settings.

After the factory reset is completed, the earbuds will automatically enter the pairing state, and the indicator light will show white and flash continuously. vivo wireless sports earbuds: You can press and hold the volume + button and the volume - button of the earbuds at the same time for about 3 seconds to restore factory settings.

The above operation still cannot be connected to the right earphone for use, you can bring the earphone packaging box and earphones, and go to the service center for testing and maintenance!

It is recommended to try to put the earbuds into the charging case, keep the lid of the charging case open, and press and hold the function button on the charging case for 15 seconds until the orange light flashes rapidly and release the button, at which point the earbuds are restored to factory settings.

Charge the earbuds again after operation to view.

If the above methods fail to help recover, the customer service center needs to detect and deal with it (customer service key Yuran center address: enter vivo official website vivo**app--my--service outlets after-sales outlets--select provinces and cities to query the address of the customer service center).

Summary. 1. How to connect 1. One-click flash connection In the state of Bluetooth on, you need to ensure that the mobile phone screen is always on. Open the earbuds charging case and move it close to the phone you need to connect to.

According to the pairing window popping up on your phone, follow the prompts to connect. 2. Open the charging case for normal pairing, press and hold the function button for 2 seconds until the white light flashes on the indicator light, and the earbuds enter the pairing state. Enter the mobile phone desktop, click "Settings" APP - "Other Networks and Connections" - Bluetooth", and connect.

Hello, what does it mean that only you can connect?

1. How to connect the cherry blossoms 1, one key to flash in the state of Bluetooth on, pure stove reputation needs to ensure that the mobile phone screen is always on. Open the earbuds charging case and move it close to the phone you need to connect to. According to the pairing window popping up on your phone, follow the prompts to connect.

2. Open the charging case for normal pairing, press and hold the function button for 2 seconds until the white light flashes on the indicator light, and the earbuds enter the pairing state. Enter the mobile phone desktop, click "Settings" APP - "Other Networks and Connections" - Bluetooth", and connect.

2. The adapted model vivoTWS2 has no specific requirements for the brand of the mobile phone, and supports the connection of the Apple mobile phone. However, it is deeply adapted to the code chain of vivo mobile phones, and the "one-click flash connection" can be adapted and connected more quickly, and there will be more ecological functions for the grandchildren. And in terms of more customization settings, as well as quick operation functions, are also only available on vivo phones.

My vivoTWS2 earphones are not received by other devices with Bluetooth, and this earphones are not available.

Are other devices also vivi phones.

It should be compared with vivo.

iQOO phones.

Search for other Bluetooth devices to try; 2.Restart the phone and search again, and try to get the two devices as close as possible; 3.Clear the connection record of the Bluetooth device Restore factory settings (for the method, please refer to the Bluetooth device vertical posture instruction manual)4

At present, TWS 2 is compatible with TWS 2 models: the memory of the Annihilation Book is greater than or equal to 6GB, the system is Origin OS, or the FunTouch OS Android 9 and above models will be deeply adapted to TWS 2 one after another.