FAW Besturn new B70, how to use the rearview mirror in the car

Updated on Car 2024-08-07
8 answers
  1. Anonymous users2024-02-15

    First of all, the driver adjusts the seat to the appropriate position, at this time observe the rearview mirrors on both sides, and after the rearview mirror, you can observe your body from the mirror, and the body area should not exceed the mirror 1 4 is a reasonable range.

    The second step is to adjust the height, in principle, observe the scene behind the car from the rearview mirror on both sides, so that the distant ground plane is in the mirror image. However, some friends are accustomed to lowering the angle of the right rearview mirror, so as to better observe the right side of the road when reversing, this approach is not wrong, but the angle should not be too low, based on the distant horizon, the road surface area should not exceed 2 3 The mirror area is a reasonable range.

    The ** rearview mirror in the car will be relatively easy to adjust, maintain the correct sitting position, map the rear window to the ** of the rear-view mirror, and keep the horizon line in the rear-view mirror ** to maintain the mirror**.

    In order to reduce the blind spot as much as possible or feel that their car exterior mirrors are too small, many car owners will choose to install large field of view exterior mirrors after purchasing a car. The large-field rearview mirror is based on the principle of a convex mirror, which expands the imaging range to reduce the visual blind spot as much as possible, and the effect is indeed obvious from this point of view, but the scenery in the mirror is deformed, and the sense of distance will cause deviation. In addition, some brands also use curvature exterior mirrors on the exterior mirrors to increase the outer visual area.

  2. Anonymous users2024-02-14

    The adjustment of the car rearview mirror should do the following, I hope to help you adjust the left side rearview mirror:

    The upper and lower positions are to place the distant horizon in **, and the left and right positions are adjusted to the body occupying the mirror range of 1 4;

    Adjustment of the right side mirror:

    Because the driver's seat is on the left side, so the driver is difficult to grasp the situation on the right side of the body, therefore, when the right rearview mirror adjusts the upper and lower positions, the ground area should be larger, accounting for about 2 3 of the mirror area, and the left and right positions are also adjusted to the 1 4 of the body occupying the mirror range.

    **Adjustments to the rearview mirrors:

    Adjust the left and right positions to the left edge of the mirror surface, and cut to the right ear of your image in the mirror. In general, you can't see yourself from the rearview mirror, and the upper and lower positions are to put the distant horizon in the mirror. The essentials of the adjustment are:

    Horizontal pendulum in the middle, the ear to the left, that is, the distant horizontal line is placed horizontally in the midline of the **rearview mirror, and then move left and right, and put the image of your right ear on the left edge of the mirror.

  3. Anonymous users2024-02-13

    Advantages: In the same level of emission of the car, the Besturn is considered to have relatively low fuel consumption. The engine used in the power is the Ma 6, and the acceleration performance is good.

    Disadvantages: The brand and logo are not very famous, the interior is rougher than that of Japanese cars, and the design of some details is not humane enough, such as the lack of automatic car lock and window closure function. Skylights are sometimes not well enclosed.

  4. Anonymous users2024-02-12

    The 2022 Besturn B70 exterior mirror adjustment button is at the armrest of the main driver's door.

    Rearview mirror angle adjustment button.

    Left and right mirror selection.

    Foldable left and right mirrors.

    The windows were locked.

    One-key lift button.

    Select the mirror you want to adjust, and then adjust the angle of the mirror via the adjustment button on the side.

    Interior mirror adjustment.

    Adjust the interior mirrors up and down.

    The interior mirrors are anti-glare (the Besturn B70 interior mirrors have an automatic anti-glare function).

    Adjust the angle of the rearview mirror correctly.

    1.**Rearview mirrors.

    Adjust the rearview mirror parallel to the horizon, which should be half the mirror. The mirrors can be slightly oriented towards the driver to ensure a clear view of the vehicle directly behind.

    2.Left rearview mirror.

    The horizon occupies 1 2 of the mirror. Here it is recommended that the body occupy 1 4 of the mirror. The image of the car as far as the rearview mirror is too small, so it is impossible to see the car close to the rear of the car while driving. If too much of the body image is exposed, it will not be possible to notice the position of the vehicle behind you.

    3.Right rearview mirror.

    Since the driver is driving on the left side of the vehicle, the blind spot in the right side mirror is larger, so the adjustment method of the left and right side mirrors is slightly different. Just adjust the field of view to 2 3 in the right mirror, and the body image is also exposed to 1 4.

    B70 heated rearview mirrors.

    The heated mirror function is set on the center console. In fact, the heating of the rearview mirror and the defogging of the rear windshield are controlled by the same button. When pressed, the mirrors and windshield can be heated at the same time.

    When the surface of the mirror is fogged, the clarity of the mirror can be improved by heating.

    Front windshield defogging.

    Rear windshield defogging Rearview mirror defogging talk about defeat.

    Temperature control. Temperature zone synchronization.

    Automatic. Inner and outer circulation.

    Air conditioner switch. Shut down.

    Air volume adjustment. Air outlet mode.

  5. Anonymous users2024-02-11

    The 2022 Besturn B70 exterior mirror adjustment button is located in the armrest of the main driver's door. 、

    Shouyin 1 rearview mirror angle adjustment button.

    2. Left and right rearview mirror selection.

    3. The left and right rearview mirrors are folded

    4. The windows are locked.

    5. One-key lifting button.

    Select the mirror that needs to be adjusted, and then adjust the angle of the mirror by using the adjustment button on the side.

    Interior mirror adjustment

    1. The inner rearview mirror is adjusted up and down.

    3. Anti-glare in the inner rearview mirror (Pentium B70 inner rearview mirror has automatic anti-glare function).

    The rearview mirror is adjusted at the correct angle

    1. **Rearview mirror.

    Adjust the mirrors to be parallel to the horizon, which should be one-half of the way through the mirror. The mirror faces the driver slightly, ensuring that the vehicle is directly behind.

    2. Left rearview mirror

    The horizon occupies 1 2 mirrors, and here it is recommended that the body occupy 1 4 mirrors. The body image occupies too little mirror, and it is impossible to see the car closer to the rear of the car while driving, and it is impossible to notice the position of the vehicle behind it if the body image is too exposed.

    3. Right rearview mirror

    Because the driver is driving in the vehicle and blindly on the left, the blind spot of the right rearview mirror is large, so the adjustment method of the left and right rearview mirrors is slightly different. The horizon can be adjusted to 2 3 in the right mirror, and the body image can also be exposed to 1 4.

    The Besturn B70 rearview mirror is heated

    The rearview mirror heating function is set on the center console, in fact, the rearview mirror heating and the rear windshield defogging are controlled on the same button, and the rearview mirror and windshield can be heated at the same time after being pressed. When the surface of the rearview mirror is fogged, the clarity of the rearview mirror can be improved by heating the rearview mirror.

    1. Front windshield defogging.

    2. Rear windshield defogging Rearview mirror defogging.

    3. Temperature control.

    4. Temperature zone synchronization.

    5auto6 internal and external circulation.

    7a c switch.

    8off9 air volume adjustment.

    10 air outlet mode.

  6. Anonymous users2024-02-10

    Summary. The mirror design of the rearview mirror memory will be adjusted with the driver's seat and steering wheel, and each driver can also adjust the rearview mirror to the best vision according to their height and driving habits, and it will automatically adjust according to the seat position the next time they drive.

    The mirror design of the rearview mirror memory will be adjusted with the driver's seat and steering wheel, and each driver can also adjust the socks of the rearview mirror to the best vision according to their height and driving habits, and it will automatically adjust according to the seat position when driving next time.

    Turn on the ignition switch first, and adjust the seats, left and right rearview mirrors according to your needs. Press the M button to start the seat memory function, and then press any number button to remember the seat position. Electric seat memory is to combine the electric seat with the on-board computer, increase the memory function of the seat, and realize intelligent management of the information parameters in the seat.

    The technical principle of the seat memory function is that the memory chip is built into the seat, which can store the information set by the user, and when it is necessary to crack the information of different users, the seat will restore the user's seat position and angle through electric adjustment, so as to achieve intelligent management. The memory storage seat control system is a typical automotive electronic control system. Automotive electronic control system (ECS) is a computer control system centered on a single-chip microcomputer, which can also be called an automotive microcomputer control system, which is composed of an electronic control unit (ECU), sensors and actuators.

    Rearview mirror memory.

    What are you in.

    Turn on the ignition switch first, and adjust the seats, left and right rearview mirrors according to your needs. Press the M button to start the seat memory function, and then press any number button of the block to remember the seat position. The electric seat memory is to combine the electric seat holder chair with the on-board computer, increase the memory function of the seat, and realize the intelligent management of the information parameters in the seat.

    You can try it. Do you know what kind of car, big brother Besturn B70 doesn't have these buttons you said.

    Okay, you're not** Pentium B70?

    22 models. 1。Turn on the ignition; 2.

    Press the red "memoryoff" button on the left side of the driver's seat; 3.Adjust the driver's seat and exterior mirrors to the appropriate position, and press and hold one of the memory buttons on the left side of the driver's seat until you hear a "beep" sound, indicating that the setting is complete; 4.As soon as you set the memory button on the driver's seat, turn off the ignition and pull out the ignition key.

    Press and hold the start button on the key for 5 seconds until you hear the "dong" silver beep and the key's memory setting is complete.

  7. Anonymous users2024-02-09

    Summary. The rearview mirror is a tool for the driver to directly access external information such as the rear, side, and bottom of the car while sitting in the cab seat. In order to facilitate the driver's operation, prevent the occurrence of driving safety accidents, and ensure personal safety, all countries stipulate that rearview mirrors must be installed on the car, and all rearview mirrors must be able to adjust the direction.

    Hello, happy to serve you!

    Thank you. The two models are not the same, and the models are different.

    It can only be said that it is very similar, but it is not the same.

    The function of the rear macro vision mirror is to reflect the situation of the rear, side and bottom of the car, so that the driver can indirectly see the situation of these positions, and play the role of "second eye".

    The rearview mirror is a tool for the driver to directly access information from the outside, such as the rear, side, and bottom of the car, from the driver's seat. In order to facilitate the driver's operation, prevent the occurrence of driving safety accidents, and ensure personal safety, all countries stipulate that rearview mirrors must be installed on the car, and all rearview mirrors must be able to adjust the direction.

  8. Anonymous users2024-02-08

    Summary. Okay, pro, the interior mirrors of the Besturn B70 are a functional area for the driver to look at the rear. Here are some common rearview mirror function descriptions:

    1.Mirror adjustment: Mirrors can usually be adjusted to the driver's personal preferences and sight needs.

    The driver can change the angle and position of the mirrors by manually adjusting or using the electric adjustment button for optimal visibility. 2.Car Interior Reflectors:

    The rearview mirror generally consists of a standard reflector that is used to observe the traffic behind the car. This can help drivers notice the behavior of oncoming vehicles, overtaking, or other vehicles to enhance driving safety. 3.

    Auto-dimming function: Some high-end models also have auto-dimming function in the rearview mirrors. This function automatically adjusts the reflectivity of the rearview mirror according to the strong light of the oncoming vehicle behind it, reducing the reflection of strong light, thereby reducing the impact of glare and improving driving safety.

    4.Heated mirrors: In cold weather, the mirrors may be affected by ice or rain, affecting vision.

    Some models are equipped with a heating function in the rearview mirrors, which can be used to remove snow and ice or other substances that affect the field of vision, and maintain good viewing conditions.

    '08. The old Besturn B70

    Okay, pro, the interior mirrors of the Besturn B70 are a functional area for the driver to look at the rear. Here are some common rearview mirror function descriptions:1

    Mirror adjustment: Mirrors can usually be adjusted to the driver's personal preferences and sight needs. The driver can change the angle difference and position of the mirrors by manually adjusting or using the electric adjustment button for optimal visibility.

    2.Car interior mirrors: Rearview mirrors generally include a standard mirror that is used to observe the rear traffic of the car.

    This can help drivers notice the behavior of oncoming vehicles, overtaking, or other vehicles to enhance the safety of their vehicles. 3.Auto-dimming function:

    Some high-end models also have automatic anti-dimming in the mirrors. This function can automatically adjust the reflectivity of the rearview mirror according to the strong light of the oncoming car behind it, reducing the negative reflection of strong light, thereby reducing the impact of glare and improving driving safety. 4.

    Heated mirrors: In cold weather, the mirrors may be affected by ice or rain, affecting vision. Some models are equipped with a heating function in the rearview mirrors, which can be used to remove snow and ice or other substances that affect the field of vision, and maintain good viewing conditions.

Related questions
12 answers2024-08-07

<>1. Positioning as a compact SUV with crossover styling. >>>More

3 answers2024-08-07

In fact, it is more worthy of attention in terms of the function of the lights. The tires are Hankook 215, and the spare tires are full-size tires, which are cost-effective, have good after-sales service, and can effectively improve driving safety; 60 >>>More

14 answers2024-08-07

B70 is the platform of the horse 6, that is, it has changed a shell, G6 is considered BYD's independent, and the choice of domestic cars is BYD, and the cost-effective ones are all domestic cars!! Now it's better than FAW or BYD, G6 has a high configuration, and B70 has stable performance. It can only be what you value. >>>More

5 answers2024-08-07

First, check the exterior for oil leaks.

Pay special attention to whether there is oil leakage at the oil seals at the front and rear ends of the crankshaft. Oil leakage at the front end of the crankshaft can be caused by broken or damaged oil seals at the front end of the crankshaft, aging or worn contact surfaces between the crankshaft pulley and the oil seal. The oil seal at the rear end of the crankshaft is broken and damaged, or the oil return hole of the rear main bearing cover is too small, and the oil return is blocked, which will cause oil leakage at the rear end of the crankshaft. >>>More

7 answers2024-08-07

It's better to have a Kia Freddy! After all, it's an original design. The exterior of the Forte can easily make people fall in love at first sight, and after absorbing many design elements of the KOUP concept car, through a large number of straight lines and folds, the Forte has changed the sleek and soft design route of the previous Korean cars. >>>More