The Suzuki Tenyu steering wheel is very heavy, can the Suzuki Tenyu steering wheel be modified with

It's heavy. fāng xiàng pán]

Steering wheel. Lock.

This entry is reviewed by the "Popular Science China" Encyclopedia Science Entry Compilation and Application Work Project.

A wheel-shaped device used to control the direction of travel for automobiles, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft.

The original cars were controlled and driven with rudders. The violent vibrations generated by the car while driving are transmitted to the driver, making it more difficult for them to control the direction. When the engine was relocated to the front of the car, the driver could no longer use the rudder to drive the car due to the increased weight.

The result is a new design of the steering wheel, which introduces a gear system between the driver and the wheels that is flexible and insulates from the harsh vibrations of the road. Not only that, but a good steering wheel system gives the driver a sense of intimacy with the road.

Hello: It is recommended to check if the main oil is in the standard position I hope mine can help you [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, the steering wheels of Tianyu are very heavy, one is its wide tires, and the other is electronic power assist, the motor is small, which is a common problem of Tianyu, I hope to help you [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, the steering wheel is heavy, first look at the tire pressure, adjust the tire pressure to the appropriate position. All four wheels are pressed to a single tyre. And then look at it.

If that doesn't work, see if the power steering fluid is missing, or if it's too dirty. If this doesn't work, consider the direction machine, I hope it can help you. [Car questions, ask the car master.]

4S shop professional technician, 10 minutes to solve. 】

Summary. The steering wheel of the Suzuki Tianyu model can be modified with a multi-function steering wheel, and the modification steps are as follows: 1. Disassemble the steering wheel of the original car:

Disassemble the steering wheel of the original car, and pay attention to disassembling the controller on the steering wheel when disassembling to avoid damage. 2. Install the multi-function steering wheel: Install the multi-function steering wheel on the frame and connect the controller to ensure the normal use of the steering wheel.

3. Debugging the multi-function steering wheel: debugging according to the manual to ensure the normal use of the steering wheel. The cost of modification is generally between 1000-1500 yuan, and the specific cost is subject to the actual situation.

The steering wheel of Suzuki Tianyu model can be modified with a multi-functional square posture number rock direction disk, and the modification steps are as follows: 1. Disassemble the steering wheel of the original car: disassemble the steering wheel of the original car, and pay attention to dismantling the controller on the steering wheel when dismantling to avoid damage.

2. Install the multi-function steering wheel: Install the multi-function steering wheel on the frame and connect the controller to ensure the normal use of the steering wheel. 3. Debugging multi-functional direction track royal disk:

Debug according to the instructions to ensure the normal use of the steering wheel. The cost of modification is generally between 1000-1500 yuan, and the specific cost is subject to the actual situation.

At present, the car is not multifunctional, can it be modified.

OK. It means that the current control link lines are all in the steering wheel.

Yes, it has to be changed.

1: The steering machine is short of oil, maintain the steering machine. 2：

The gap between the front suspension system is too large, and the lower arm can be replaced after inspection. 3: Turn to the ball head loose ore, and change it to 4 after the car inspection

Measure the front speed (i.e., the direction of the guiding angle) 5: Check whether the direction of the auxiliary force is leaking, or whether the booster oil is missing 6: Check whether the tire pressure is too low, or whether the pattern is worn Zheng Na bias, if the wear deviation is the front lower arm damage, the replacement of Congzhou can.

7: If the first few items are not, then you'd better do a four-wheel alignment, which will solve the problem.

Hello, check the tire pressure and tire tread depth, Tianyu uses an electronic steering machine to help the brigade, and his steering machine is indeed heavy and combusting! There is also a toe running out of direction, and it will also be heavy. [If you have a problem with the car, ask the car master.]

4S shop professional technician, 10 minutes to celebrate the socks stool clock to solve. 】

Hello car owner, Tianyu direction assistance is electronically controlled, the computer needs to read the fault code to see which faults have early branches, it is recommended to go to the 4S shop to focus on checking whether the direction angle sensor is damaged, and the direction machine control module! If you can rule out circuit and sensor problems, focus on checking the machinery such as whether there are screws, loose ball joints and stuck, and tires that are deformed! Hope mine can help you!

If you have a problem with car dismantling, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, this needs to be checked to see if the steering machine has been hit, if not, check whether the steering machine booster pump has oil or whether it is broken. Hope it helps. [If you have a problem with the car, ask the car master.]

4S shop professional technician, 10 minutes of positive core bell solution. 】Hood.

Hello, check the booster oil, I hope my answer can be helpful to you, please set to, thanks!

Hello, check the steering machine booster pump.