How to use silver powder How to use silver powder The blending of silver powder paint

Resin: Commonly known as varnish or varnish, the type of which depends on the material of the object being painted, such as transparent varnish for steel. [Usage]: 1

The silver powder is diluted with solvent, and the addition amount is just enough to dilute the silver powder so that the silver powder is evenly dispersed. 2.

After the silver powder is evenly diluted, add varnish to break it up and mix it thoroughly. It is better to add a clear oil that is just enough to make the silver powder paint not show the bottom when spraying. 3.

Silver powder: thinner.

The ratio of resin is about: 1:3:

Everything is easy to operate. [Remarks]:1

Pine perfume. Cyclohexanone can also be used as a solvent, but this solvent is toxic and is not recommended. 2.

In view of this, silver powder paint is used in outdoor pipes, which is easy to be oxidized, and antioxidants can be added.

and other additives to delay oxidation.

One. Solvent selection.

1.What type of solvent to choose is determined according to the characteristics of the paint itself, and there are generally polar and non-polar solvents that are commonly used, 2The solvent reacts directly with aluminum to produce hydrogen, so the moisture in the solvent must not exceed the proportion.

It is best to use a dehydrating agent in advance to remove some of the water.

3.Chlorine-containing solvents are not used in aluminum-silver paste pigments. Because it releases HCI, reacts with aluminum pigments, and interferes with the normal production process.

Two. Add a scale.

a. The proportion of aluminum silver paste added to colored primer is 1%-4%.

b. The proportion of aluminum silver paste added to pure silver primer is 4%-10%.

c. The proportion of aluminum silver paste in single-layer metal flash paint is 5%-13%.

d. The proportion of aluminum silver paste for anticorrosive paint, canned and coil coatings is 10%-13%.

Dear, hello, I am glad to answer for you: silver powder paint ratio A: silver powder paint mix ratio is:

1:3:7 (mass ratio).

The blending method is as follows:1The silver powder is diluted with solvent, and the amount of silver powder is just diluted to make the silver powder dispersed evenly for the chain to be clear.

2.After the silver powder is evenly diluted, add varnish to break it up and mix it thoroughly. The amount of varnish added is just enough to make the silver powder paint spray without revealing the bottom for the best shed guess.

3.Silver powder: thinner.

The ratio of resin is about: 1:3:

7 (mass ratio).

Summary. Hello:: The silver powder is diluted with solvent, and the amount of silver powder is just diluted to make the silver powder dispersed evenly.

Hello:: The silver powder is diluted with solvent, and the amount of silver powder is just diluted to make the silver powder dispersed evenly.

2.After the silver powder is evenly diluted, add varnish to break it up and mix it thoroughly. It is better to add a clear oil that is just enough to make the silver powder paint not show the bottom when spraying.

The thinness of the resin has a great influence on this ratio. Everything is easy to operate. [Remarks]:

1.Rosin perfume, cyclohexanone, etc. can also be used as solvents, but this solvent is toxic and is not recommended. 2.

In view of the fact that silver powder paint is used in outdoor pipes, it is easy to be oxidized, and additives such as antioxidants can be added to delay oxidation".

1. First of all, put the clothes flat on the table, so that the side stained with silver powder paint is facing up, try to stretch the clothes open, and then use sealing glue to paste back and forth on the clothes back and forth on the stool Zhengsen several times to remove the silver powder on the clothes. The advantage of this method is that it can remove the dust and very fine fibers on the clothes and jujube clothes by the way.

2. The cleaning method of Qingxian sticking silver powder paint on the clothes is to evenly apply the dilution of the paint to the surface of the clothes, and then wash it to remove the silver powder paint.

Summary. [Usage]: 1Silver powder (silver paste) is diluted evenly with solvent, and the addition amount is just right to make the silver powder diluted and dispersed evenly.

2.After the silver powder (silver paste) is diluted evenly, the varnish is added to prepare evenly.

3.In general, there is no strict regulation on the amount of silver powder (silver paste) to be added, and it mainly depends on the needs of the situation. Usually, in order to make the painted object just covered, the proportion of silver powder paint that does not expose the bottom is about 14%, and the proportion of silver paste paint is about 16%, all of which are better for easy operation.

What is the ratio of silver powder paint?

Preparation of silver powder paint (preparation material) 1Pigment: silver powder or silver paste 2

Solvent: such as Tianna Zheng peel water, thinner, shouting Yucha thinner 3Resin:

Commonly known as varnish or varnish, its selection depends on the material of the object being painted. For example, the varnish used for exterior walls is different from the varnish used for steel, and the choice of varnish will affect the adhesion of the dismantling staff.

[Usage]: 1Yinbi old powder (silver paste) is diluted evenly with solvent, and the amount of silver powder is just diluted and dispersed evenly 2After the silver powder (Pi Shu Qi silver paste) is diluted evenly, add varnish to mix evenly 3

In general, there is no strict regulation on the amount of silver powder (silver burning like pulp) added, and it mainly depends on the needs of the situation. Usually, in order to make the painted object just covered, the proportion of silver powder paint that does not expose the bottom is about 14%, and the proportion of silver paste paint is about 16%, all of which are better for easy operation.

Waterborne silver powder paints are used as topcoats for all-waterborne protective coating systems and can also be used as topcoats for hybrid coating systems. Coated on top of solvent-free solvent-free primers, water-based silver powder paints can also be used as decorative topcoats on aging surfaces of various old coatings and galvanized surfaces.

Heavy antiseptic. If it is a heavy anti-corrosion, such as the ship's bottom, waterline, freeboard, deck, gate, underwater steel components, underground pipeline gas tanks, etc., use J53-34 chlorinated rubber silver powder anti-rust paint, composed of chlorinated rubber, synthetic resin, aluminum powder, pigments, additives, etc., with a dosage of about 260 g m2;

Moderate antiseptic. Medium anti-corrosion, such as steel structure chimneys, gas cabinets, oil storage tanks, etc., with X53-6 high chlorinated polyethylene silver anti-corrosion topcoat, composed of high chlorinated polyethylene, synthetic resin, plasticizer, aluminum silver paste, additives, etc.; or use polyurethane silver powder anticorrosive magnetic paint, composed of hydroxyl resin, polyisocyanate prepolymer, aluminum powder, additives, etc., with a dosage of 100g m2;

Mild antiseptic. Mild anti-corrosion, such as ordinary steel structure, that is, phenolic resin silver powder antirust paint, also known as fast-drying silver powder paint, is composed of special phenolic resin, float aid, aluminum paste, solvent, and the dosage is about 97 g m2.

Have you ever learned about silver powder paint? What is silver paint? And what is the use? I believe that many netizens have such a question in their hearts. I will introduce you to the relevant information of silver powder paint on the following decoration network.

1. What is silver powder paint?

Silver powder paint is currently the most widely used paint in the automotive industry, mainly aluminum powder is added to the paint, the effect of which is to make the paint have a better glitter effect, so as to attract people's attention. Of course, if it is only such a role, it cannot have such a wide range of uses, let's take a look at the characteristics and functions of silver powder paint.

Second, what are the characteristics of silver powder paint?

When it comes to the characteristics of silver powder paint, then it must be from the color of its surface, which has two main characteristics, one is that it has a good light and dark transformation effect, and the other is that it has a color transformation effect. Let's talk about these two characteristics in detail. The effect of chiaroscuro is mainly manifested in the inconsistency of the color shade in the front and side directions, which is mainly because it has the greatest reflection effect from the front, which will give people a visual feeling of bright tones; When viewed from the side, the reflection effect is greatly reduced, and the tone will appear darker.

Whether this phenomenon is obvious or not depends mainly on the size of the aluminum particles, the smaller the aluminum particles, the less significant the effect, and vice versa. The color transformation effect is mainly completed by transparent pigments, and some transparent pigments are added to the silver powder paint, and after adding these pigments, a colored paint will be formed, because the silver powder paint itself has a sensitive transformation effect, therefore, if the paint itself is colored, it will see different shades of color from different angles, thus forming a color transformation effect.

3. What is the use of silver powder paint?

For the introduction just now, we just know that silver powder paint is one of the most widely used coatings in the automotive industry, in fact, silver powder paint is also a very widely used paint coating in other industries, such as often used in heating equipment, metal surface anti-corrosion, metal pipes, paint cans, etc. Fourth, the use of silver powder paint.

The adhesion of silver powder paint is still relatively strong, it can be sprayed directly or surface painted, if spraying is used, it is best to filter with 100 mesh mesh, of course, sometimes, in order to ensure that silver powder paint can be used more durably, a layer of primer will be applied on the surface of the construction object, in this case, we must wait for the primer to dry thoroughly before the construction of silver powder paint.