Audi A6L owners, recently found that the left suspension has collapsed a little, does it need to be

As the name suggests, air suspensions use air springs, while traditional mechanical suspensions use ordinary springs. At present, air suspension is mostly equipped with high-end SUV models, such as the Touareg and Audi Q7

This kind of thing, and it's optional!

The air suspension works well, but it is easily damaged.

The air suspension works on the principle of using an air compressor.

Compressed air is formed and sent to the spring and shock absorber chambers, changing the height of the vehicle. If something goes wrong, can I fix it? Or just change?

Compared with mechanical suspension, air suspension is also relatively "squeamish", because the airbag will be "tortured" inside and out

1.Inside: The air injected into the air suspension airbag contains a certain amount of moisture, and is often mixed with many other substances, which will age the airbag rubber;

2.External: The form is on the road, the rolled up stones, if the airbag is in the middle, it will leak slightly, and it will be scrapped directly.

The air suspension is broken.

Now there are thousands of air suspension repairs on the market, and many places may have 4S shops.

It's not easy to repair. And to buy a brand new one, you have to be thousands larger, so depending on the situation, if it really doesn't work, just change it.

Absolutely, check the shock absorption and arm.

To the Tieliu draw group found that the recent business of the line, if he wants to repair it, then this ** should be three or four days away guests can go.

Manually operate the screw hole or small wrench on the valve body, if the pressure is normal, the cylinder does not move, the cylinder is broken, otherwise, the valve is broken:

1. First of all, the boom of the loader should be reduced to a minimum, and then the engine should be started, pay attention to the machine should be in the neutral position, and the boom lever should be in the descending position, and then, increase the throttle and release the boom, you can judge the quality of the small cavity oil seal according to the oil leakage at the interface of the large cavity of the cylinder;

2. If it is found that there is a lot of oil leakage at the large cavity interface, it can be determined that the hydraulic cylinder oil seal is not sealed well or the oil seal is damaged;

3. If, on the contrary, we find that even if the boom is loosened, there is still no oil leakage, or there is only a small amount of oil leakage, then it means that the hydraulic cylinder has good performance in sealing the small cavity oil seal.

: Can be restored.

First of all, the general crash will not be too serious, and in the face of such a car, the maintenance will not be sloppy and can be restored.

Secondly, if the damage is more serious, you can consider using the original parts for maintenance and assembly, generally the original German factory, ***, the model is accurate, and the original is no different, and then go to the technical maintenance point for assembly and maintenance rectification, it can be restored, but it requires a certain technical ability.

In short, after the collision, it is possible to repair to restore, and the insurance of the vehicle will also have compensation, even if the parts inside are damaged, you can also find a channel to buy the original parts configuration to achieve the original quality.

Summary. Bearings need to be replaced.

Hello dear, automotive professional analysis: Audi A6 hydraulic bearings on both sides have collapsed and need to replace the bearings.

When the vehicle is driving, if the front wheel bearing is damaged, it will make a loud noise, but the noise is different from the tire noise. You can try to continue driving for half an hour, or get out of the car and touch the bearing damage with the back of your hand, if the A6L bearing is damaged, it will be hot and hot, if the temperature of the front wheel bearing is higher than the normal temperature, then you should replace it as soon as possible.

Automobile wheel bearing is one of the key parts of the automobile, the role is to bury the side load and provide precise guidance for the rotation of the wheel, it can bear axial and radial loads. Damage to the wheel bearing or hub unit will cause the vehicle to have a costly failure problem during driving, and even cause damage to the safety of human and hydraulic nuclei.

What to do if the hydraulic bearings on both sides of the Audi A6 engine support collapse.

Bearings need to be replaced.

How much does it cost to exchange one?

Pro, a few hundred dollars.

It can be repaired by replacing it with a new shield. The chassis guard plate can not only prevent the mud Yuanzhou from wrapping the engine and chassis, but also effectively alleviate the impact on the engine when the car is driving on uneven roads, and play a protective role to a certain extent.

The chassis guard plate is the engine guard plate, which is designed according to the engine guard designed according to various different models, which is designed to prevent the engine from being wrapped in mud and the engine during driving, and then to prevent the engine from being damaged due to the impact of the uneven road surface during driving.

The car guard plate is generally a steel guard plate, because the car chassis is generally only about 20 cm from the ground, and the first thing to consider is to prevent the uneven ground from dragging and impacting the engine. Of course, there are also many "high-end cars" that use aluminum alloy to protect the hall cavity search board.

Large manufacturers of mini cars and vans install hard plastic and resin protection plates when they leave the factory, which can generally only have a certain protective effect on the soil on the road.

Off-road vehicles are generally used for abnormal road driving, so the engine guard plate is an indispensable main component, and each manufacturer has installed a very strong steel guard plate before leaving the factory. Dress up (Photo by Jing Chenchen) @2019

It can be repaired, and replaced with new guards. The bottom pure disc guard plate can not only prevent the mud bag engine and chassis, but also effectively alleviate the impact of the car on the engine when driving on uneven roads, and play a protective role to a certain extent.

The chassis guard is the engine guard, which is the engine guard designed according to different vehicle models. It is designed to prevent mud from the engine firstly, and secondly to prevent the impact of uneven road surface on the engine during driving and damage the engine.

Car fenders are generally made of steel because the chassis of the car is only about 20 cm above the ground. The first thing to consider is to prevent the engine from being hit by a concave. Of course, there are also many "luxury cars" that use aluminum alloy guards.

Manufacturers of mini cars and vans install plastic and resin protective panels for hard chain pants at the factory. Generally, this kind of protective plate can only protect the soil of the road surface to a certain extent.

Off-road vehicles are generally used for non-normal road driving, so the engine guard plate is an indispensable main component, and each manufacturer has installed a very strong steel guard plate before leaving the factory.

Summary. Hello dear! We will be happy to answer your questions! Here you can find out:

It is recommended that you replace it directly, after the hood is deformed, the effect of use can be achieved through maintenance, but the strength is reduced, and after the repair, it will also affect the value retention rate of the vehicle.

Hope mine can help you! Have a great day!

The hood of the Audi A6L hit the rear shift, how can it be fixed.

Hello, dear ask users, hello! I am your car commissioner Nizi, your question has been received, and I am urgently organizing the answer for you, please don't worry, typing is slow, it will take about 3-5 minutes to reply to you, please wait a little longer! Ming Dafu.

Hello dear! We will be happy to answer your questions! Here you can find out:

It is recommended that you replace it directly, after the hood is deformed, the effect of use can be achieved through maintenance, but the strength is reduced, and after the maintenance, it will also affect the value retention rate of the vehicle. I hope my Crack can help you! Have a great day!

The hood hit the dog and moved back.

Dear, this can be reported for insurance damage.

Different materials have different treatments.

1.If it is an iron sheet metal part, it can be knocked out from the inside out, and there is a paint sand off with a meson machine to pull it out, generally in the maintenance of the two ways to use together, roughly restored, and then re-painted, before painting with putty scraping, and then sanded to the same as the original car, and then painted, it will be restored.

2.If it is a plastic part, it can be repaired, generally with a baking gun to soften and then break back to its original appearance, and then re-paint.