-
Anonymous users2024-02-15You can decorate a sloping bookcase, it should feel good.
-
Anonymous users2024-02-14The installation of the wall bookshelf is not difficult, you can try it yourself, so how to install it? Next, let's introduce pchouse.
Hang-up type: assemble each board with screws, and then use a ruler to measure the distance between the two holes on the back; Then check the size, find out the accurate point on the wall and make a mark, take an electric drill to make a hole in the marked position, pay attention to the drill bit should be slightly inclined; Knock the expansion screw tube into the hole just punched, flush with the wall, and screw the screw onto the expansion tube at the same time, leaving the screw head 5mm in size for hanging on the wall; Finally, it is necessary to hang it on the wall, and it should be noted that the buckle is divided up and down.
Wall-mounted: first measure the distance between the two holes of the bookshelf partition, then mark the installation position on the wall, use an electric drill to drill the hole and then install the expansion tube, the next step is to install the screws and adjust the length of the screws, and then install the bookshelf partition and adjust the position.
Water pipe type: First of all, the wrought iron base is set on the wall to set the punching position and mark, and the hole is punched according to the size of the expansion screw at the fixed point, and the depth of the hole is 2mm deeper than the expansion screw; Then the expansion rubber particles are completely installed in the holes, and then the expansion screws are tried to be installed into the expansion rubber particles to see if they are firm; The next step is to place the wrought iron base on the hole that has just been fixed and the installation is completed.
-
Anonymous users2024-02-13Wall-mounted bookshelf is the gospel of small home owners who love to collect books, it is a good deal with the problem of book collection, it is a bit similar to the shelves of our shops and library shelves, do not need rated materials, all fixed equipment is fixed on the wall, similar to a "ladder", move the partition, you can schedule the distance between the shelves of the bookshelf.
1. Preparation of installation tools.
Wall-mounted bookshelves are widely used in small homes, so what are its equipment and things? The length of the hanging wall-mounted metal fixing equipment is according to the standard requirements of your own room and bookshelf. Matching metal cantilever support, width 30 40cm.
According to the width of the bookshelf, the laminate is cut out of the board, woodworking board, MDF difference, and the composite board can be 1cm thick and wood grain veneer. A number of metal screws. Cement nails.
Things: levels, nail guns, electric screwdrivers, drills, rulers. Empty the surroundings in the place where the equipment bookshelves are needed, and stick to a flat wall.
Measure the distance with a ruler and mark the location of the hanging metal fittings of the equipment. It is best not to span more than 150cm to prevent the center from falling and twisting. Use a nail gun to fix the cement nail to the wall, equipment metal fittings, use a level to ensure straightness, and fix the other end to touch Qingjing.
2. Install other accessories.
After we have made it according to the second process, we can then fix the other laughing spine metal fittings to the wall in order, paying attention to the level and span. When the metal fittings of the bookshelf are connected, the equipment is cantilevered and supported, and the same attention is paid to the level and robustness. Then you can place the shelves and books.
3. Install the baffle around the bookshelf.
We also need to take into account the placement of books when we place the equipment, we generally place the books on the façade when they are placed slightly sideways, so some baffles can be placed at one end of the bookshelf, no need to fix, similar to the library of the same veneer, so that the books can be better organized.
-
Anonymous users2024-02-121. Prepare tools: level, electric screwdriver, nail gun, ruler, drill bit, some metal screws, cement nails.
2. Set the length of the hanging wall-mounted metal pin fixing device according to the size requirements of the room and the bookshelf. The matching metal cantilever is used for support, and it has a width of 30-40 cm. According to the width of the bookshelf, cut the laminate, MDF, woodworking board, composite board thickness can be 1 cm, wood grain veneer.
3. The wall-mounted bookshelf installation wall should be flat, measure the distance with a ruler, and mark the location of the installation of metal accessories. It is best not to exceed 150 cm in the span to avoid falling and bending. Fix the cement nail to the wall with a nail gun, install the metal fittings, be sure to ensure that the level is vertical, and fix the other end.
4. Fix other metal fittings in the same way, pay attention to the level and span. The next step is to install the cantilever support, also paying attention to the level and firmness. Then place the shelves and books.
5. Since the books are easy to fall sideways when placed on the façade, some baffles can be placed at one end of the bookshelf without fixing, so that the books can be better arranged.
How to maintain the bookshelf scientifically?
1. If the weather is humid, users can use dehumidifiers or desiccant to treasure your favorite books and count the bookshelf in the morning.
2. Books with heavier weight and larger openings should be placed on the lower layer of the bookcase as much as possible to avoid its excessive volume crushing the bookcase partition, and "top-heavy" is easy to lead to the instability of the bookcase.
3. For large or heavy books, it is best to place them on the lower floor of the bookcase, which is easier to take.
4. Try to avoid bumps during transportation to prevent surface damage from rusting the bookshelf.
5. When placed, it should be handled gently, keep it horizontal, and keep a certain distance from the wall.
Bookshelves placement tips.
1. Do not place it under a window. Avoid placing bookshelves under windows. Because once it rains and snows, some of the rain and snow water outside will enter the study with the window and fall on the bookshelf, which will directly cause damage to the material of the bookshelf.
2. Do not face the door. Bookshelves must not be placed directly facing the door. From the perspective of Feng Shui, if the bookshelf is placed directly facing the door, there will be a loss of wealth and wisdom.
However, if the bookshelf cannot be separated from the door due to the area, layout, etc., then the owner can choose to move the direction of the furniture slightly, so that the bookshelves are not facing the door.
3. Do not face the toilet door. Not only can the bookshelf be opposite the door, but it can't be opposite the toilet door. From the perspective of Feng Shui, the bathroom is a dark and filthy place, and if it is opposite the study and the door is facing the bookshelf, it will be very detrimental to the preservation of wealth and blessings in the home.
Therefore, the placement of bookshelves must not be opposite to the bathroom door.
The stone wall is divided into two kinds, one is the cultural stone decoration wall, that is, a wall is built with pebbles, slate, sandstone slabs, etc., the cultural stone has low water absorption, acid resistance, not easy to weather, good sound absorption effect, strong decoration, mainly used for living room decoration; The other is gypsum board veneer, that is, the gypsum board is carved with undulating brick wall joints, which are concave and convex on the wall, especially with the lighting of lights, the sense of hierarchy is very strong, and the decorative effect is very good.
When designing, you must grasp the overall layout of your room in place, you can choose milky white, beige, or black, white, gray three colors in the choice of color, you can choose marble tiles, so that you can have a very good sense of simplicity, and you should also choose concise and clear items in soft decoration.
<> the overall space of this bedroom is small, but the decoration design does not lose the romantic and solemn temperament, the TV wall design cleverly forms a perfect match with the wall, and the paintings on the wall and the room design reflect each other, classic and fashionable. The floor of the bedroom should be warm, generally in neutral or warm colors, and the materials should be flooring carpets. The shape and color of the ceiling is one of the key points of bedroom decoration design, and it is generally better to be simple, elegant and warm in warm colors. >>>More
The main thing is what you like, there is no problem with wallpaper for three or five years, after three or five years, it is estimated that I am tired of seeing, I want to change it, whether the board is deformed or not depends on the carpentry skills you are looking for, as long as the general problem is not so big in the later stage, the scraping is not good-looking, you can add some pigment or other things to the latex paint when you adjust it, the brush out effect is still quite good, as long as you like it, just use it, no problem!
You can directly choose the right wood for decoration, and you must pay attention to the size of the decoration and the arrangement of the space.