How to adjust the time control switch of Bora Electronics KG316T microcomputer

How to adjust the microcomputer time control switch.

Push-button timing switch:

1.Press the "Cancel Recovery" button 4 times in a row to unlock the screen.

2.Press the "Calibration" button to calibrate the hour, the "Calibration" button to calibrate the minute, the "Calibration" button to calibrate the week, and the switch to calibrate the current time.

3.Press the "Timing" button to set the timing time, press the timing button, press once is 1 on, press two times is 1 off, press three times is 2 on, press four times is 2 off, and so on you can set multiple groups of timing (the time of on and off needs to be set separately).

4.Press the "Auto Manual" button to adjust to "Auto".

There are 4 groups, 8 groups and 16 groups of push-button time-controlled switches on the market, which can be selected according to needs.

Bluetooth time-controlled switch

2.Tap on the device and enter the password, the initial password is 0000.

3.Click Add Timing Setting, modify the time of the required timing switch, you need to set several sets of timing, click a few times to add timing settings, and Timing 1, Timing 2, Timing 3 and so on will appear in turn.

4.Click Save to send.

The Bluetooth time control switch can set up to 30 sets of timing time, and it is automatically calibrated by networking, so there is no need to manually calibrate the time.

Hello, the setting of the time control switch is relatively simple, such as setting the load to 18:00 for one turn on time and 05:00 for one off time

The setting method is as follows, the first opening time is 18:00, the first level is set to 05:00, the second opening and two closing and the third opening and three closing all the way to ten opening and ten closing must clear the time to zero (because it is not used).

Then set the day of the week, set the current time of the time switch, and turn the time switch to automatic.

You can refer to the manual to set it up, it's very simple. Just try a few more times.

KG316T Microcomputer Time Control Switch Instructions.

1. Open or lock the keyboard: Press and hold the "Clock Key" and hold the "Cancel Resume Key" for a few seconds to lock the display sign "Lock".

2. Press and hold the "Clock Button" and then press the "Day Button, Hour Key, Minute Key" to adjust the Beijing time.

Step , press the button, set the project.

1) Press (manual) to make the triangle of the monitor in the automatic position2) Press (set) to enter the timer on setting (display 1 on)3) Press (week), set the same every day, different every day, the same from Monday to Friday, or the same from Saturday to Sunday.

4) Press (hour) (minute) to set the time to open.

5) Press (Set) to enter the timer off setting (display 1 off) 6) Press (hour) (min) to set the time of off.

7) Repeat 2) 6) Set the time of the 2nd 6th and 2nd 12th switches 8) Press (clock), end time setting.

If 6 is not needed, 12 switches are timed to press the (clock) key to return the actual time.

If the setting is incorrect or the setting is canceled, press the (Cancel) button, and then press again to restore the original setting.

Displayed when there is no setting (

4. Check: Press (Set) to check if all the set times are correct.

5. Modification: Please press the (cancel) button at the setting, and then reset the timer switch time and week.

6. End check: press the (clock) button to end the check and setting, and display the clock.

7. Manual control: press the (manual) key, you can realize random opening and closing or automatic operation.