How does the Mi Smart Switch connect with a normal dual control switch

It is necessary to connect LA, LB and LC together and connect with the power live wire, and the L1A, L1B and L1C of the switch are connected with the control line of the controlled lamp respectively, and the other end of the lamp is connected to the power neutral line. L2A, L2B, and L2C do not require wiring. There is another key point after the wiring of the zero-fire version of the Xiaomi smart switch, which is to realize automatic or remote control through the Mi Home APP and the gateway.

It just can't be connected, because his switch is used alone, if you are an ordinary switch, if you want to control it, it needs to make a plug, you need to make a plug to connect it, that is, to make a plug board can be combined and connected. . .

Xiaomi smart switch can't be connected with an ordinary double-open switch,Smart with one end of the ordinary switch interface,The other end is going to be scrapped,But you can add a Xiaomi wireless switch to achieve dual control。

The smart switch needs a gateway, and you need to buy a Xiaomi gateway after installing the network. The smart switch can be matched with the network connection. This device cannot be connected directly to its network with Mi Home, and it must be connected to the Xiaomi gateway.

The switch has three modes, stand-alone, double-click, and long-press. This is an if(if) operation. Here it is recommended to arrange from frequent to infrequently used or to say as little as possible not to touch by mistake.

Here is a click as an example, although some devices may be 100 meters away, but the network can be fully controlled, no need to worry. Next, proceed to the steps of else.

Finally, choose to stop the alarm, although the voice can be turned off directly, but sometimes the alarm clock is too noisy, and it will be more convenient and faster to do it manually. In addition to this function, you can also turn on and off the desk lamp. This is a good way to wiring at home that is not easy or too expensive.

1.Once you open the Mi Home app, tap the plus icon at the top right.

2.Tap on the Mi Home Smart Socket device.

3.Select WiFi and click Next to connect.

4.Hold your phone close to your device to transfer network data.

5.Click the Done option below.

6.Set the room where the outlet device is located.

7.Rename the name of the device for voice operation.

8.Once you've set it up, you can control the outlet device through the Mi Home app.

1.First, go to the management page and add a switch first.

2.Add smart quotes.

3.Set the boot mode.

4.It can be done correctly.

As long as the timer switch is set when the wifi connection to the Internet is normal, the timer switch should also work after the network is disconnected.

Hello, I'm glad to answer for you, the specific steps are as follows: 1. Press and hold the button on the top of the Xiaomi multi-function gateway to cover your head until the light turns yellow, and prompt to start connecting to the network. 2. Enter the Mi Home app, click on the multi-function gateway, and then click "Next".

3. Select the router for network configuration, at this time, the Xiaomi gateway will start to automatically adapt to the network, and wait for about 1 2 minutes to be successfully configured. 4. After the macro volt number is successfully configured, enter the equipment hall hole page, and click the Mijia multi-function gateway under the device. On this page, you can set the color and brightness of the illuminations.

We hope you find this service helpful.

Hello dear! It's a pleasure to serve you. The wiring of the zero-fire version of the Xiaomi smart switch is very simple, and the wiring method is the same as that of the ordinary switch.

It is necessary to connect LA, LB, LC together and connect with the power live wire, and the L1A, L1B, and L1C of the switch are connected to the control line of the controlled lamp, and the other end of the lamp is connected to the power neutral line. L2A, L2B, and L2C do not require wiring. There is another key point after the wiring of the zero-fire version of the Xiaomi smart switch, which is to realize automatic or remote control of the gateway through the Mi Home APP.

Pro: The wiring method of the zero-fire version of the Xiaomi smart switch is the first wiring method of the zero-fire version of the Xiaomi smart switch: from a normal switch position, connect to another control switch position with three wires. The second wiring method of the zero-fire version of the Xiaomi smart switch:

The dual-control switch is connected with another dual-control switch with two wires, and the third wire is the live wire in its respective position, which is actually still three wires. Since all the wires of fire are connected, they can be used as a third wire.

It is recommended that you try the method to do it and see it:

1. It is recommended that you put this SIM card into another mobile phone to check whether you can access the Internet.

2. If you can't access the Internet, please ask your carrier if you are in arrears.

3If it can be used, please put it in your Xiaomi phone, turn on the data switch, and reset the default in Settings - Access Point APN, and then restart the phone to try again.

4If you still can't access the Internet, it is recommended that you back up your data, enter recovery to clear all data (turn off, press and hold the volume up + power button to enter recovery), upgrade your phone to the latest development version of the system, don't install apps that require root permission for the time being, and see if it can be restored to normal.

5If you still can't access the Internet, it is recommended that you go to a nearby Xiaomi authorized repair point or Xiaomi Home to have the staff check it.

Mi Home is open from Tuesday to Sunday, from 10 a.m. to 6 p.m.

The Internet doesn't have a switch function! As long as the mobile phone's data network or wifi has a switch!

If the system prompts, it means that you are not connected to wifi or your data network is not turned on.

If the data network is turned on and cannot be used, it means that the mobile phone is in arrears or the traffic ** is limited.

If the data network cannot be opened. The only way to bring your card and mobile phone to the business hall is to consult customer service.

If you want to use wireless wifi to access the Internet, you need to go to the mobile phone settings and turn on the wireless network switch to connect to the wifi, if you want to use the mobile phone card to access the Internet, you need to turn on the mobile data switch in the mobile phone settings.

1. For safety, first close the power switch, connect the live wire in the wall junction box to the L hole of the input terminal, and connect the light wire in the wall mega wall junction box to the L1 hole and L2 hole (note: the lights connected to L1 and L2 are controlled by the left and right buttons of the switch respectively), tighten the screws, and then use a flathead screwdriver to lift the switch shell. 3. Fix the switch to the junction box on the wall with screws

4. Buckle the switch shell, 5. Open the main switch, and the blue state indicator flashes to indicate normal power-on. Press the button to rent the shell of the foreign stove, and the red status indicator will continue to flash slowly, indicating that the switch is normal but has not yet been connected to the network.

Summary. Hello, dear. The Xiaomi Smart Switch networking method is as follows:

Hello, dear. The Xiaomi Smart Switch networking method is as follows:1

First of all, open the Xiaomi Mijia smart app and log in to your own shirt hole Xiaomi; 2.Click "Equipment", and click "+" in the upper right corner to add or add a new device; 3.Select the smart switch; 4.

Scan the second hall code of the Xiaomi Mi Home Smart Switch and connect it to the gateway;

Hello, dear. Supplement the above methods as follows: 5

In the page that appears, click "Connect Wi-Fi Smart Gateway", and then click "Bind Smart Gateway". 6.Select the bound gateway, and click the rotten rock to finish as it has been in the past. 7.

Dear, the way to solve the offline of Xiaomi devices is as follows: when the Mi Home app controls the device, the "device offline" prompt appears, which may be caused by network abnormalities, and you can reconnect to wifi; It may be that there is a bug in the software, you can try to upgrade the software; It may be that the device is far away from the mobile phone cover and needs to be close to the device to use. Thing and 晌.

It may be a Bluetooth control switch, how to change it to gateway control, that is, how to connect the smart switch to the gateway?

How does the smart switch reconnect to the gateway?

Dear, the method of connecting the Mijia jujube orange app to the stool cultivation gateway is as follows: 1. After entering the Mijia Wu, then click on the Bluetooth gateway. 2. After entering the Bluetooth gateway, then click on the device and click to enter.

3. After entering, click to turn on the Bluetooth mesh gateway to complete the setting.

Click "Devices" and click "+" in the upper right corner to add a new device. 3.Choose the smart switch; 4.Scan the stupid grinding stove of the Xiaomi Mijia Smart Switch*** and connect it to the gateway; 5.

In the page that appears, click "Connect Wi-Fi Smart Gateway", and then click "Bind Smart Gateway". 6.Select the bound gateway and click Done.

What should I do if I don't have a smart switch***?

Kiss, try this method. Steps to log in to the account in Xiaomi TV and box:Set up a --- account and a safe --- Xiaomi account,You can use He Wu to take a Zen ride or scan the code (the TV interface displays a branch answer***) or"Account+Password"Log in。