How to turn off the automatic start and stop of Spiri, the automatic start and stop of Spirion is no

There is an automatic start-stop button under the center console, (there is an a) is on by default, press it to turn off, and then press to turn on. However, even if the automatic start and stop is turned off, it will be turned on by default after the next ignition.

Automatic engine start-stop is to automatically turn off the engine when the vehicle stops temporarily during driving (such as waiting for a red light). When it's time to move on, the system automatically restarts the engine. English name:stop&start, referred to as intelligent fuel-saving system, is a set of control engine start and stop system.

Hello, the automatic engine start stop system (start stop system) is a system that can collect driving data by itself, judge whether the engine needs to continue to work, shut down the engine in a timely manner according to the judgment results, and quickly start the engine when needed. Its main components include an engine control unit, multiple sensors, an enhanced starter motor, and a high-efficiency generator and battery. This system gives the car the ability to automatically start and stop the engine when it stops in the middle of the road, thereby reducing fuel consumption and exhaust emissions while waiting for the car to stop.

I hope that it will help you.

Ignition, pull the seat belt, press the hair loss machine, start and stop buttons, between the A-word buttons, look at the model, the button position is the same as the ignition, restart, and wait for the default start, and press each car.

It's useless to start and stop, I turned it off as soon as I started, and at the back of the gear, I pressed it to turn it on, which is to turn off [Luneng Intelligence, the leader of professional electric vehicle charging facilities].

Going to a 4S shop can give you a permanent closure.

Summary. Hello, Car Master Mechanic is here to serve you. Attentive, careful, attentive, for you to answer the car fault problems, for you to find the corresponding problem solutions and maintenance methods.

We will provide you with a satisfactory answer to your questions, I hope this service can help you, if it is helpful to you, I look forward to your praise and attention. I wish you good luck in the Year of the Tiger, good luck, Hello, friend, according to the questions you provide, here are the answers for you, if your automatic start and stop does not work, there are two reasons for the failure. The first cause of the fault is that the battery voltage is too low or the battery is not enough to store the problem, this needs to do a test on the battery, if the battery voltage is in this state of power loss, the life is relatively low, replace the battery to solve this problem.

The second problem is that your engine or transmission system is faulty**. Cause this start-stop function method to enter the state of being shut down, use the diagnostic computer to connect the vehicle, see if there is a fault, if the engine system is faulty, do a repair or clear the fault ** can solve this problem.

Hello, I'm helping you sort out the answers to your questions, please wait a while Hello, the car master exclusive mechanic is here to serve you. Attentive, careful, attentive, for you to answer the car fault problem, for you to find a relatively Zen solution to the problem and maintenance methods. We will provide you with a satisfactory answer to your questions, I hope this service can help you, if it is helpful to you, I look forward to your praise and attention.

I wish you good luck in the Year of the Tiger, good luck, Hello, friend, according to the questions you provide, here are the answers for you, if your automatic start and stop does not work, there are two reasons for the failure. The first cause of the fault is that the battery voltage is too low or the battery is not enough to store the problem, this needs to do a test on the battery, if the battery voltage is in this state of power loss, the life is relatively low, replace the battery to solve this problem. The second question is that your engine or transmission system is faulty**.

Cause the start-stop function of the car to enter the state of being shut down, use the diagnostic computer to connect the vehicle, see if there is a fault, if the engine system is faulty, do a repair or clear the fault ** can solve this problem.

Summary. A: The 2009 Axle Capacity does have a start-stop function, which is an advanced technology that can effectively improve the fuel economy and environmental friendliness of the car.

The start-stop function automatically shuts down the engine when the car is stopped, saving fuel and reducing pollution. When the car starts again, the engine automatically restarts without having to pull the manual start switch. In addition, the 2009 Axle Capacity is also equipped with a series of advanced safety systems, such as ABS anti-lock braking system, ESP electronic stability system, multi-mode body stability system, etc., which can effectively improve the safety performance of the car.

A: The 2009 Axle Capacity does have a start-stop function, which is an advanced technology that can effectively improve the fuel economy and environmental friendliness of the car. The start-stop function can automatically shut down the engine when the car is stopped, thus saving fuel and reducing pollution.

When the car starts again, the engine automatically restarts without having to pull the manual start switch. In addition, the 2009 Axle Capacity is also equipped with a series of advanced safety systems, such as ABS anti-lock braking system, ESP electronic stability system with buried lead system, multi-mode body stability system, etc., which can effectively improve the safety performance of the car.

Fellow, I really didn't understand, I can be more specific.

Answer: The 2009 model does not have a start-stop function. Causes of the problem:

1.The engine was not installed correctly, resulting in the engine not starting properly. 2.

The engine is not properly wired, resulting in the engine not starting properly. 3.The engine was not properly adjusted, resulting in the engine not starting properly.

Workaround:1Check that the engine is installed correctly, and if not, reinstall the engine.

2.Check that the engine is wired correctly, and if not, rewire the engine. 3.

Check that the engine is adjusted correctly, and if not, readjust the engine. Personal Tips:1

When installing the engine, it should be installed according to the steps in the manual to ensure the correct installation of the engine. 2.When wiring the engine, it should be wired according to the steps in the manual to ensure the correct wiring of the engine.

3.When adjusting the engine, it should be adjusted according to the slippery steps in the manual to ensure the correct adjustment of the engine. Relative to difficult knowledge:

Proper installation, wiring, and adjustment of the engine is the key to ensuring proper operation of the engine, so when installing, wiring and adjusting the engine, the steps in the instructions should be followed to ensure the correct installation, wiring and adjustment of the engine.

Summary. Hello, as long as you press the brake pedal directly while driving, the engine will automatically turn off after the vehicle completely stops for about two seconds, and the engine will remain off if you keep pressing the brake pedal. As soon as you release the brakes or turn the steering wheel, the engine will automatically ignite again, and you can immediately step on the accelerator again to start, and the whole process is in D gear.

In order to solve the problem of excessive fatigue of pressing the brakes all the time, as long as the Auto Hold electronic parking brake is also turned on, the engine will only start after pressing the accelerator pedal lightly, and the right foot does not need to press the brake all the time. Working principle The working principle of the start-stop system in this section is that when the vehicle stops moving due to congestion or intersections. The driver presses the brake pedal and stops to disengage.

At this time, the Start Stop system automatically detects: the engine is idling and there is no gear; The wheel speed sensor of the anti-lock system shows zero; The electronic battery sensor shows that there is enough energy for the next start. When these three conditions are met, the engine automatically stops turning.

When the signal light turns green, the driver depresses the clutch and immediately activates the "start-stop" and starts the engine quickly. The driver shifts, steps on the accelerator, and the vehicle starts quickly. in highly efficient battery technology and corresponding launch.

Kiss. As long as you press the brake pedal directly while driving, the engine will automatically turn off after about two seconds of complete stopping, and the engine will remain turned off if you keep pressing the brake pedal. As soon as you release the brakes or turn the steering wheel, the engine will automatically ignite again, and you can immediately step on the accelerator to start a rough return step, and the whole process is in D gear.

In order to solve the problem of excessive fatigue of pressing the brakes all the time, as long as the Auto Hold electronic parking brake is also turned on, the engine will only start after pressing the accelerator pedal lightly, and the right foot does not need to press the brake all the time. Working principle The working principle of the start-stop system in this section is that when the vehicle stops moving due to congestion or intersections. The driver presses the brake pedal and stops to disengage.

At this time, the Start Stop system automatically detects: the engine is idling and there is no gear; The wheel speed sensor of the anti-lock system shows zero; The electronic battery sensor shows that there is enough energy for the next start. When these three conditions are met, the engine automatically stops turning.

When the signal light turns green, the driver depresses the clutch and immediately activates the "start-stop" and starts the engine quickly. The driver gears up, steps on the accelerator, and the vehicle starts quickly. in highly efficient battery technology and corresponding launch.

Summary. Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! Based on your question, make the following answers:

The phrase Please check the start-stop system appears on the dashboard, indicating that there is a problem with the start-stop system and needs to be checked and dealt with in time. Problems with the start-stop system may be caused by the following reasons: 1. In the case of not meeting the safety conditions, the automatic start-stop system will prompt you to check the start-stop system.

2. It may be that the current of the battery is too low, and the voltage is insufficient, generally speaking, the engine cannot be started when the power of the start-off battery is less than 75%. 3. It may also be because the car does not reach the state set by the driver, such as when the air conditioner is turned on in summer, if the engine is turned off, the air conditioning and refrigeration compressor will not work, and the temperature in the car is too different from the temperature set by the air conditioner, and the automatic start-stop system will also have problems. 4. If the car is driving at low speed, after starting, the speed of the car does not reach 5km h, or repeatedly decelerates and is lower than 15km h, in this case, it will also prompt to check the start-stop system.

After the engine is ignited, it automatically turns off, what is the reason for this?

Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! According to your question, make the following answers: The phrase please check the start-stop system appears on the dashboard, indicating that there is a problem with the start-stop system and needs to be checked and dealt with in time.

The problem of the start-stop system may be caused by the following reasons: 1. In the case of the dismantling of the Songjube Qingye orange that does not meet the safety conditions, the automatic start-stop system will prompt you to check the start-stop system. 2. It may be that the current of the battery is too low, and the voltage is insufficient, generally speaking, the engine cannot be started when the power of the start-off battery is less than 75%.

3. It may also be because the car does not reach the state set by the driver, such as when the air conditioner is turned on in summer, if the engine is turned off, the air conditioning and refrigeration compressor will not work, and the temperature in the car is too different from the temperature set by the air conditioner, and the automatic start-stop system will also have problems. 4. If the car is driving at low speed, after starting, the speed of the car does not reach 5km h, or repeatedly decelerates and is lower than 15km h, in this case, it will also prompt to check the Qiwu orange stop system.

The engine ignited and then stopped by itself.

In this case, I recommend that you read the fault code with a diagnostic computer first.

There are many reasons for no idling, such as throttle failure, line failure, sensor failure, and computer board failure. You need to use a professional diagnostic computer to read the fault code, and then repair it according to the Tongmo Royal Obstacle Code.