How canon MG2400 not scan?

Use a router or switch to connect the printer and the computer in a subnet.

2.Install the 2420D color scanning driver on the computer, which is included in the CD that comes with the printer, called Colour Scan. If not, you can go to Canon's official **go up** scan the driver and install it on the computer.

3.In the online neighborhood, look at the IP address, subnet mask, and gateway of the local connection, and record it. If not, you can also set it up manually. Generally set to: IP address; subnet mask; Gateway.

4.Start the printer, go to its system settings, find the network settings, and set its IP address, subnet mask, and gateway to be the same as your computer. Save it, and restart the printer.

5.After placing the file you want to scan on the printer platen glass, press the "Scan" button on the printer panel.

6.Go back to your computer, and in Start-Programs, find the Colour Scan installer, select one of the tool options, there is an option to find printers and scanning devices in the network, click on Discover and let it automatically search for printers on the network. After the search is complete, the interface will display the IP address, subnet mask, gateway and other information set on the printer.

You can close this interface.

7.Open a Word blank document (Paint, ACDSEE, etc., Word 2007 is an example here), select Insert - Clip Art - Manage Clips in the lower right corner, select File in the dialog box - Add Clips to Manager - from a scanner or camera. In the dialog box that pops up, select the Canon 2420D, and then click Insert.

It should be that the operating system has corrupted some critical file or stopped some critical service. Try a different computer.

Remove the printer Reinstall the driver.

Close 360 to try!

The operation steps for the Canon MG2400 printer are as follows:

1. Connect the printer cable. Canon printers have three lines. One power cord connects the printer to an outlet to provide power, and the other two slightly flatter power cords are used to connect to a computer host to transmit data over the Internet.

2. Turn on the power button. Once the three wires of the Canon printer are connected correctly, tap the printer's power button and the printer plex key bridge will start. However, you also need to establish a connection to the printer before printing.

3. Connect the printer. Open "Devices & Printers" on your computer, tap the name of your Canon printer in "Printers & Faxes", and when the printer is connected to the network, the "Ready" status will appear.

4. Add ink to the printer. Open the lid under the printer's paper position, press the button under the power button, open the ink cartridge, and add ink. When you're done, remember to close the lid.

5. Install paper on the printer. Place the white paper in the paper tray of the printer. Don't put too much paper at a time to avoid jams. When you print your first bright fiber, you can put a few sheets of paper and see if you can print it.

6. Click Print. Finally, open the document you want to print, click the "File Print" button, and you can print normally. You will also squeak when you start printing, which is normal.

The Canon scanner could not be scanned for the following reasons:

1. The driver version is installed incorrectly, reinstall the correct hail-carrying driver version;

2. If the quality of the data cable is problematic or damaged, replace the new data cable, or replace the interface with other interfaces if the interface is damaged or the quality is problematic;

3. If there is a conflict between the scanner and the system, replug the data cable, and restart the scanner and the computer;

4. If the scanner hardware is faulty, contact the after-sales service for detailed testing.

The steps to use the Canon MG2400 printer are as follows:

1. Connect the printer cable. Canon printers are equipped with three cables, one is the power cord that connects the printer to the socket plug to provide power, and the other two are slightly flattened and connected to the computer host to transmit data over the Internet.

2. Turn on the power button. Once the three wires of the Canon printer are properly connected, tap the power button of the printer to start the printer. However, you also need to set up a connected printer before printing.

3. Connect the printer. Open "Devices & Printers" on your computer, tap the name of your Canon printer in "Printers & Faxes", and when the printer is connected to the network, it will display the status of "Ready".

4. Add ink to the printer. Open the lid under the printer's paper position, and then press the button under the power button to open the ink cartridge and refill the ink. Once you're done, remember to close the lid.

5. Load the paper on the printer. Put white paper in the paper tray of the printer, and do not put too much paper at a time to avoid paper jams when printing. When printing the first sheet, you can put a few sheets to get used to whether the printing can be successful.

6. Click File to print. Finally, open the file you want to print, click File Print, and the paper will be printed normally. It is normal for you to have a squeak start sound when you start printing.

AnswerGlad to answer your question, the Canon MG 2400 printer installation steps are: 1. Click "Devices & Printers" 2. Select "Add Printer"; 3. Select "Add Local Printer"; 4. If you use a USB cable to connect, please select "USB B00X", or if you use a parallel port cable to connect, please select "LPT1". 5. Select the corresponding manufacturer in "Manufacturer", select the printer model used in "Printer", and follow the on-screen prompts to complete the driver installation.

Scanning:win7 system core:Start --- printer and device--- find the driver of printing,Click right to --- to see if there is a start to scan,If you don't find it, it's at the beginning--Cheng Xiang limb sequence--find the scanner and fax,Scan (the document is put on the glass plate or the paper feeder).

MG2580 Printing Photos should be noted:

1: Adjust the adjustment degree at the feeding place to 4*6:

3: After the paper is adjusted, then you can print the photo, we open a photo, click on the right jian, and then press print:

4: Follow the steps below:

1. If the ink cartridge is fine, turn off the printer, and then connect it again, sometimes because of some problems with the system.

2. Or you should pay attention to the position of your printer, if there is a problem with the placement of the printer, it will also cause it to not work.

3. If it doesn't work, turn off the printer, then take out the ink cartridge, and then align it to install it. Not yet, check the driver, reinstall the driver.

4. If none of the above can be solved, it may be that the metal sheet on the cartridge has not been used for a long time, and the contact is poor, so you have to take out the cartridge, and then wipe it clean with an eraser, and you will find that the metal sheet on the cartridge is shiny. If you install it again, there will generally be no problem.

5. If the problem cannot be solved, it is necessary to consider whether the cartridge is damaged, and it is recommended to replace the cartridge.

6. It is recommended to contact professional maintenance personnel for maintenance.

I'm like this, how did you solve it later.

What is the situation when the power does not turn on.

Check whether the chip contacts are dirty, or the chip is burned, and clean the chip contacts first. If not, it can only be replaced.

<>1. Confirm that the driver of the printer has been installed, turn on the power and connect it to the computer.

2. Click to start, programs, Windows attachments, windows fax and scan on the computer.

3. After opening Windows Fax & Scan, click New Scan at the bottom of the menu in the software interface.

4. On the Zhichang pop-up scanner option, select MG2400 printer and click Scan.

5. After the scanning is completed, the image can be stored in the designated directory in the morning.