What is the difference between adhesive rubber and astringent rubber, and what is suitable for what

The difference between astringent rubber and viscous rubber:

1. The structure of the rubber surface is different

The surface of the adhesive rubber is connected in a zigzag shape little by little, in addition to the use of laminated rubber technology; The surface of the shrinkage rubber is a "wave" made up of uneven surface connections.

2. The feel is different

The adhesive rubber can directly rub the ball, and the friction is very large. When pulling the ball, the shape of the board can be pressed slightly; When playing with astringent rubber shoes, be sure to hit first and then pull, first hit hard and then hold the ball. When turning, lighten the shape of the board and then tilt forward so that the ball that is pulled out can turn around and rush again.

3. Suitable for different groups of people:

Sticky rubber is best suited for players who serve well, pull up the curve ball, and are close to the table; Astringent rubber is best suited for players who pull forward the curveball and move away from the table.

How to play astringent rubber and sticky rubber:

Due to the characteristics of adhesive rubber, it can produce strong rotation without too much force, and the use of athletes' wrists near the stage is a key technology, and due to the characteristics of adhesive rubber, players near the stage can perform strong rotation by shaking their wrists.

Since astringent rubber tables have much worse properties than viscous rubber when handling balls on the table, there is often a rise in the table. When hitting the ball, the racket should be set, and the far table is a specialty of astringent rubber, whether it is the maze of high balls or Waldner's far table, the advantages of the astringent rubber on the far table have been reflected.

The astringent rubber is suitable for playing the spin ball, and the sticky rubber is suitable for playing the spin ball. Astringent rubber is more suitable for playing high hanging arc circles, and pulling and serving are more suitable for sticky rubber!

The difference between viscous rubber and astringent rubber leather:

1.The structure of the rubber surface is different: the adhesive rubber surface is connected by dots like "jagged", and in addition to the use of cover technology; The surface of the astringent rubber is like a "wavy shape", which is composed of uneven surfaces connected together.

2.The feel is different: the adhesive sleeve can directly rub the ball, and there is greater friction when using force and without force; When hitting the ball with astringent rubber, you must hit it first and then pull it, hit it hard first, eat the ball, and the plate type should be brighter first, and then lean forward when adding spins, so that the ball pulled out will turn and rush.

3.Suitable for different people: sticky rubber is most suitable for players who serve well, pull high-profile arc balls, and close to the table; The astringent rubber sleeve is suitable for pulling forward and punching the ball and players on the far stage.

I hope the above information is helpful to you, and if you have any other questions, welcome to let me know.

The characteristics are different: The adhesive rubber will have a very sticky feeling when touched, and the astringent rubber will feel strong resistance when rubbing left and right after pressing a little harder. The viscous rubber is stiff, and the astringent rubber is soft and elastic.

This is because the adhesive rubber itself is sticky and the ball is slower, and if the sponge is soft, the ball will be slower and the ball will appear weak.

The sticky rubber serve is more spinning, but it is also easier to eat the opponent's spin, and the sticky rubber is suitable for small short balls in the teeper. The astringent rubber ball is fast, suitable for fast attack, suitable for backhand horizontal attack, less arc circle play, and the play style needs to rely on the active sideways to make up for the lack of backhand rotation.

Table tennis tips.

The user needs to pay attention to controlling the power of the body, concentrating, and controlling the center of gravity of the body in order to control the direction and speed of the ball.

Lower your center of gravity. Appropriately lower the center of gravity of the body, find a position that suits your science, and make the ball more stable.

Relax your body when hitting the ball, and pay attention to relaxing your arms and waist during the hit. You should also focus on the moment when the ball makes contact with the racket, so that you can hit the ball more quickly and effectively.

1. Features: The characteristics of sticky rubber: it is more sticky to the touch, it is softer than astringent rubber, and the friction of sticky rubber is large, which is especially suitable for players who play mainly in arc ball and chipping ball, and most of the domestic rubber is sticky rubber; After use, wipe it with a sponge (or a clean damp cloth), the best way is to use a special table tennis rubber cleaner, which not only cleans but also increases the surface viscosity, and then sticks a special rubber film to isolate dust particles in the air and prevent oxidation.

Astringent rubber: It feels a little harder to the touch with your hands, the viscosity is not high, the speed is fast, it is suitable for fast attack, and the arc circle is slightly weaker. The most famous representatives of astringent rubber are the Sriver and Bryce (buses) of butterflies, as well as the Dornik F1.

The best way is to use a special table tennis rubber cleaner, which not only cleans but also increases the surface viscosity, and then applies a special rubber film to isolate dust particles in the air and prevent oxidation. The general astringent rubber has one thing in common - that is, the sponge is much softer than the domestic adhesive rubber, the sticky rubber ball is made by the stickiness of the rubber surface to make the rotation, and the function of the sponge is to make the ball have a faster speed;

The astringent rubber sleeve relies on the deformation of the rubber and the sponge to create rotation, and the bottom strength of the bottom plate determines the speed of the ball, and the sponge will deform when the ball hits the astringent rubber sleeve, so as to have the feeling of "wrapping" the ball. 2. Difference: The ability of astringent rubber to make rotation will not be much worse than that of viscous rubber; Astringent rubber sleeve requires a good hand feel and the ability to control the plate type; Compared with adhesive glue, astringent rubber sleeve can better reflect the bottom strength of the bottom plate itself.

3. Sticky rubber: the ball is relatively slow, the manufacturing rotation ability is strong, and the manufacturing arc mainly depends on friction. 4. Astringent rubber:

The ball is fast, does not eat the ball much, makes the spin a little less but has little impact, and relies on strength to create arcs. [hee-hee] [hee-hee] [hee-hee] [hee-hee].

The general astringent rubber has one thing in common - that is, the sponge is much softer than the domestic adhesive rubber. In other words, sticky rubber ball plays by relying on the stickiness of the rubber surface to create rotation.

Vulcanized rubber. It refers to vulcanized rubber, which has the characteristics of no stickiness and not easy to break, and most rubber products are made of this kind of rubber. It is also called cooked rubber, commonly known as rubber or rubber.

A general term for rubber compounds after vulcanization. After vulcanization, the raw rubber is rented.

It forms a three-dimensional structure in space, with high elasticity, heat resistance and tensile strength.

and insolubility in organic solvents.

Wait. The vast majority of rubber products are vulcanized rubber.

Deformation Factor:

Compression set is one of the important performance indicators of rubber products. The magnitude of the compression set of vulcanized rubber is related to the elasticity and recovery of vulcanized rubber. The magnitude of the permanent deformation is mainly governed by changes in the recovery ability of the rubber.

The factors that affect the recovery ability of the segment are the intermolecular forces (viscosity), the change or destruction of the network structure, and the displacement between molecules.

When the deformation of rubber is caused by the extension of the molecular chain, its recovery (or the magnitude of the permanent deformation) is mainly determined by the elasticity of the rubber: if the deformation of the rubber is also accompanied by the destruction of the network and the relative flow of the molecular chain, this part can be said to be irrecoverable, it has nothing to do with elasticity.

If you are a novice and want to practice well, use adhesive rubber; If you want to play, use astringent rubber. Novices take the initiative to exert force, and it is best to use adhesive rubber. Astringent rubber is too easy to borrow, you think you are actively exerting force, but in fact you are still borrowing.

After the initiative, you can play casually later, the ball is ***, easy to control. Especially in the resultant force, the ball of the combined force is the most massive. At this time, it is necessary to use your own power to control the lever and combine the two forces.

Sticky Rubber: Sticky Rubber is best suited for serving, pulling up the curve ball, and approaching Taiwanese players. Due to the characteristics of the adhesive rubber, it can perform powerful spins without too much force, which is very important for the rational use of rotation and landing point changes of those who serve well in the game.

If you use adhesive glue, you need to increase the strength of the serve or reduce the friction angle between the ball and the racket, which will inevitably affect the quality of the serve. Because the friction between the ball and the rubber is thin, the rubber must provide a certain viscosity and large friction before the ball can fall off the stage normally. This is a key technique used by athletes in the recent stage.

Due to the characteristics of the adhesive rubber, players in the near stage can perform powerful spins by shaking their wrists.

Astringent rubber: astringent rubber is suitable for forward curve ball and far platform players, because the ball is relatively sticky and crisp, and there will be no phenomenon of dragging mud and water, so it is more suitable for players who pursue high quality and high speed of the front curve ball, because when dealing with the earth in the table, the characteristics of the astringent rubber table are much worse than the sticky rubber table, so there is often a phenomenon of height exceedance, and the racket should stand up a little when hitting the ball, and the far platform is the specialty of astringent rubber, whether it is Metz's high ball, or Waldner's far table, All reflect the advantages of the astringent rubber table of the far platform.

Most people use backhand astringent rubber, mainly because sticky sleeves such as hurricanes require more force to produce mass, and most people's backhand power is far less than that of forehand. At this time, the backhand tuck can play a faster ball speed with small and medium power, and the spin is not very weak, which is naturally more suitable. On the contrary, for example, a player like Liang Jingkun who has a more violent backhand than a forehand can use a backhand sticky rubber, even if the hardness is greater than the forehand.

Astringent rubber is recommended, because astringent rubber will be easier for table tennis novices, not so hard, and will also allow novices to master a certain feeling, if the situation is very good, it can also let novices learn to play table tennis.

I think you can choose astringent rubber for the backhand, which I was like when I was a novice, this should be related to the style of play, and there are differences in the choice of different playing styles.

I think you can choose sticky rubber, the best strength of sticky rubber is better, and it can cause a more effective blow to the ball in the process of hitting the ball.

The surface of the astringent rubber is rough and has fine particles. The adhesive rubber has a smooth and flat surface.

The elasticity, hardness, and speed of astringent rubber are slightly stronger than that of adhesive rubber (only the same sponge is used and the size and density of rubber particles are basically the same), while the friction (that is, the ability to make rotation) and control of adhesive rubber are higher than that of astringent rubber.

In view of the different characteristics of the two types of rubber, most players who use astringent rubber tend to prefer fast attack or fast arc, emphasizing power and speed. Most competitors who use adhesive rubber put more emphasis on full spin and control.

The astringency is better, which can make it more convenient for you to operate, and it will make you get a very good table tennis rubber.

Astringent, because this material is easy to play when playing, the ball will not be out of its control when playing, and will firmly grasp the ball within its own range.

Choose sticky, sticky rubber helps to fully exert force, pointing where to hit.

The difference between astringent rubber and viscous rubber:

1. The structure of the rubber surface is different

The surface of the adhesive rubber is connected by dots like "jagged", and in addition to the use of cover glue technology; The surface of the astringent rubber is like a "wavy shape", which is composed of uneven surfaces connected together.

2. The feel is different

The adhesive sleeve can be rubbed directly against the ball, and there is a large friction force when using force and without force. When pulling the ball, the plate type can be pressed down a little; When hitting the ball with astringent rubber, you must hit it first and then pull it, hit it hard first, eat the ball, and the plate type should be brighter first, and then lean forward when adding spins, so that the ball pulled out will turn and rush.

3. Suitable for different groups of people:

The sticky rubber is most suitable for players who serve well, pull up the high-profile arc ball, and close to the table; The astringent rubber sleeve is suitable for pulling forward and punching the ball and players on the far stage.

How to play astringent rubber and sticky rubber:

Due to the nature of the adhesive sheet, it is possible to create strong rotations without too much force. The use of the wrist of the near-stage player is a very critical technology, because of the characteristics of the adhesive rubber, the near-stage player can create a strong rotation through the shaking of the wrist.

Due to the characteristics of the astringent rubber table in the handling of the ball in the table is much worse than the sticky rubber, often appear high phenomenon, when hitting the ball should be the racket upright, and the far platform is the specialty of the astringent rubber, whether it is Metz's high ball or Waldner's far platform hold, all reflect the advantages of astringent rubber in the far platform.