-
Can be compatible, there is no incompatibility, but there are a few things that need to be modified1Memory is not recommended to use Kingston's There are many fakes There are more fakes than real ones Recommend ADATA Wanzi Qianhong 1333
2.The graphics card is a little weaker, and the reputation of the brand is very poor, he is a channel goods, my previous 9800GT is miserable red, and it didn't take two months to have problems, but this also depends on RP's Recommended ZOTAC's graphics card For example, ZOTAC GTX460 1G Destroyer has a very high performance ratio, but in this way, you have to change the power supply again At least the last rated 350W If the budget is tight, choose GT440 GT450.
Finally, in the reply gzyl400 this brother, you said, "The discrete graphics card should be a little bigger!" Discrete graphics card with 1G or more is good! "Isn't this one 1g?
-
The original 2100 box has been discontinued, and now it is the 2120 with a higher frequency than the 2100.
This motherboard is an M-ATX medium board on the independent display, if the budget is enough, it is recommended to use the ATX large board P8H61
3.The graphics card is OK, and if the brand awareness is good, choose Yingchi, Zotac, Yingzhong, etc., and choose a card like Blaupunt, Dilan, etc.
4.It's best not to choose the Jedi Man for the chassis, heat dissipation is definitely a problem Except for the hot speculation on the Internet, this case is nothing worth recommending.
5.Everything else is OK, be sure to pay attention to distinguish the authenticity. In addition, the quality of the graphics card is not determined by the video memory, but depends on the bit width, frequency, stream processor, etc.
You can consult me about PC building and Silver Fox Digital can find me.
-
Big brother, please send the configuration of your computer to help you card, look!
If you don't have a configuration, how do you know if it's compatible?
-
Preparation materials: computer,
1. First enter the windows10 system, and then right-click the start button in the lower left corner2, then click the "run" option in the right-click menu, 3, enter the "dxdiag" command in the run, which is very important4, and finally you can see the configuration of the computer in the pop-up window, check whether it is compatible, and the problem is solved.
-
It can be identified by:
1. [The memory is not compatible with the motherboard].
The failure of incompatibility between the memory and the motherboard is more common, which is manifested in the fact that the computer was still working well yesterday, but as soon as it is turned on this morning, it is "ticking" non-stop. All you have to do is open the case, take the memory module off and plug it back in. This is the case where the memory is typically incompatible with the motherboard.
Solution: Carefully wipe the gold finger of the memory module with an eraser and reinsert it into the slot.
Use hot melt adhesive to fill in the gaps on both sides of the memory slot to prevent continued oxidation during use.
If there is an alarm after using it for a period of time, you can replace the memory module first to see if there is still an alarm during future use.
If there is a memory alarm after a period of time, only by replacing the motherboard can the problem be completely solved.
For the case that the memory module and the motherboard are not compatible due to technical problems, you can only replace the memory module of other brands, and of course, you can also change the motherboard.
2. [The graphics card is not compatible with the motherboard].
Fault performance: First, the graphics card manufacturing process is not standardized, resulting in a short circuit after inserting the AGP slot, which is manifested as no power.
The second is that the graphics card sometimes works normally and can light up the display; Sometimes, the monitor doesn't light up irregularly. However, it is perfectly fine to plug the graphics card into another motherboard. In this case, only the graphics card can be replaced.
The third is that the computer host is also working normally, and the image display of the display is also normal, but there will be occasional irregular image blurs.
Fourth, as long as you use this graphics card, the system will work unstable, either crashing frequently, or often dropping the graphics card driver. In this case, it is also possible that the driver design of the graphics card is defective, which causes the graphics card to work unstable, resulting in a system crash.
3. [The hard disk is not compatible with the motherboard].
There are not many such cases, but there are also hard disks that recognize well on this motherboard, but they don't recognize it on another motherboard. For example, if you want to boot from the hard disk, you must be at the main disk position of the IDE1 interface to boot normally, otherwise you can read and write after plugging it in, but it just can't boot.
4. [The power supply is not compatible with the motherboard].
The power supply is the power source of the computer, but it is the key to the key. Each component of the computer has high requirements for the stability of the power supply, and the change of 12V and 5V is within 10%, and the change is within 5%. If the output voltage of the power supply changes beyond this range, some parts will fail strangely, some will simply strike, and some may be scrapped altogether.
It's good, you don't need to change it, what are you for?
Is the monitor AOC? Are you sure it's 24? 24's is not cheap. >>>More
Actually, I don't hurt you, this low-end configuration is still installed with xp, big games are not good, and our small games can also be enjoyable.
If you talk about cost performance and want to overclock, then choose Jetwave Blu-ray P43 or Spartak BI520 >>>More
Look at your memory, it is DDR3 generation memory, and the hard disk is 500G, which is considered a mainstream configuration. So in terms of configuration, it's not too low.