After the iPhone X is plugged in with the charger, it shows that this accessory is not supported, ho

It may be a problem with the data cable, try changing it, or replug it a few times.

It is possible that the problems of unsupported accessories are as follows, the first original charging cable is damaged, the second mobile phone tail plug or the charging cable head is not in good contact, this can be tried several times. Thirdly, the data cable you bought is not the original factory, and it is also prone to such problems.

The charging accessory currently in use is faulty, or has been damaged.

The interface of the iOS device is dirty or damaged.

You can check whether there is a foreign object or blockage at the device interface, gently clean it with a cotton swab, and then try to reconnect.

It is recommended that you do not buy cheap data cables at will, in addition to the situation that fake and inferior data cables will not be able to charge normally, they may also damage the device and bring potential safety hazards.

The data cable should not be the original, try a new one.

Summary. Dear, hello, there are several possibilities that will lead to this situation: 1. It may be that the charger and socket are relatively loose, and then plug and unplug it again to try it, or it may be that the data cable is a little loose with the charger, reconnect it.

2. It is possible that the data cable is broken, although it is the original, but there may also be quality problems. 3. If the above two situations are not, then the colleague press and hold the power button in the upper right corner and the home button under the screen for 10 seconds, and the collection will be automatically turned off, and then press the power button to turn on. 4. If it still can't be charged after forced restart, it is estimated that it is a quality problem of the mobile phone.

Depending on your situation, you should collect it in the warranty period, if it is a quality problem, Apple will give a new machine.

Dear, hello, there are several possibilities that will lead to this situation: 1. It may be that the charger and socket are relatively loose, and then plug and unplug it again to try it, or it may be that the data cable is a little loose with the charger, reconnect it. 2. It may be that the data cable is broken, although it is the original, but there are also quality problems with the punch.

3. If neither of the above two situations is true, then the colleague will press and hold the power button in the upper right corner and the home button at the bottom of the screen for 10 seconds, and the collection will be automatically turned off, and then press the power button to turn on. 4. If the cherry belt still can't be charged after forced restart, it is estimated that it is a quality problem with the mobile phone. Depending on your situation, you should collect it in the warranty period, if it is a quality problem, Apple will give a new machine.

Just connect to the data line and there will be a prompt, this problem is generally poor contact, solution: see if it is a data cable bullet whether there is dirt, and then check whether the tail plug of the mobile phone (data selection socket) has dirt, and use cotton tung to let the backup sign alcohol clean. The charging bureau destroyer is not original, the voltage is insufficient, the normal charging Apple charger is 1 amp, most of the cottage chargers are not enough 1 amp, change the charger to try it.

If the charging port cable of the mobile phone is damaged, whether it has been flooded or replaced, try charging it with other chargers and data cables in the world.

Update to the latest version of iOS, some accessories may require the latest version of iOS. Make sure to update to the latest version of iOS. The specific steps are as follows:

1) Tap Settings.

2) Go to Settings.

3. Tap General.

4) Click Software Update.

5) Go to Software Update.

<>7) Update completed.

Make sure the accessory is compatible: If it's the first time you're trying to use the accessory, make sure it works with your device. Some accessories only work with certain iPhone, iPad, or iPod touch models.

Check the connection: Disconnect and reconnect the accessory to see if the warning disappears. If the warning still appears, check the connector of the accessory and the connector of the device for damage or debris. If necessary, gently remove debris and clean the device's interfaces.

There are several reasons for this:

Solution: If your data cable is an Apple MFI certified accessory, or the official included accessory is faulty, please contact the nearest Apple Store to replace or maintain the data cable, if your data cable is purchased from a third-party channel and has not passed the Apple MFI certification, for security reasons, it is recommended that you go to the physical store to buy the official data cable, and the third-party data cable cannot pass Apple's detection, so the prompt does not support this accessory.

2. Accessories are not supported by your device.

Workaround: Make sure that the cable supports your iPhone, because some cables are customized for a specific iPhone, iPad or iPod touch.

3. Your iOS device's interface is dirty or damaged.

Solution: Disconnect and reconnect the data cable and observe whether the warning disappears. If the warning still appears, check the connector of the accessory and the connector of your device for damage or debris.

If necessary, gently remove debris and clean the interface of your device, such as gently wiping the interface with a small cotton swab and wiping the gold finger of the data cable with alcohol, and then test.

1. The biggest chance of occurrence is that Apple's data cable is not original or has not been certified by Apple's MFI. If your data is copycat or fake, it will appear that it cannot be charged and does not support this accessory. It is recommended that you buy and use Apple** original charger and Apple MFI certified data cable, Apple's official website can be checked, for example, Tiya Tiya data cable is Apple certified, you can check Tiya on the official website, you can check the certification information.

2. As soon as the data cable is connected, there will be a prompt, this problem is generally poor contact, solution: see if it is a data cable bullet whether there is dirt, and then check whether the tail plug of the mobile phone (data selection socket) has dirt, clean it with cotton swab alcohol.

The reason for the "not supporting this accessory" error prompt may be that the prompt appears just after connecting the data cable, this problem is generally poor contact, solution: see if the gold finger of the data cable is dirty, and then check whether the mobile phone socket is dirty, clean it with cotton swab alcohol.

Usually, non-original chargers and data cables are used, and a prompt will pop up after checking inside Apple. If this is the case, the charger and cable must be replaced. If this is the case with the original device, simply unplug it and plug it back in.

Personally, I think that this accessory should be used in a non-original data cable, in this case, it is best to go to the after-sales store to buy a ** original data cable.

The iPhone charger does not support this accessory because it is not an original accessory, and Apple's accessories cannot be used with other pieces, it must be original, or Apple series.

What should I do if the Apple charger does not support this accessory? Let's take a look at the solution.

The way to temporarily alleviate it is to turn it off and charge, anyway, Apple has embedded the data cable detection ** into the hardware.

The iPhone charging display does not support this accessory, which means that the iPhone cannot be powered by the current charger, the reasons and solutions are as follows:

1.Insufficient voltage: It is recommended to change the socket, do not plug it into the computer or adjust the brightness of the iPhone screen to the darkest, and then plug the charger back in.

2.The charger or cable is not original: Replace it with the original iPhone cable and the original charger and recharge.

3.Check whether the room temperature is too low: Apple has set up a low temperature protection for the battery of iOS series products, and sometimes the iPad will not charge if the temperature is too low, so as to prevent deposits in the battery, resulting in a short circuit inside the battery.

4.The charging head has been used for a long time or the interface is dirty: change the charging head. Take a thin piece of metallographic sandpaper and cut it out to a suitable size, fold it in half a few times, and gently rub it in the interface a few times.