A must have pair of shoes in a woman s shoe cabinet with boots, so can the boot shaft of boots be ma

Prepare materials: rubber bands, needles, thread.

1. Put the rubber band around the leg.

One circle, tighten a little and cut the length that fits.

2. Stitch the two ends of the rubber band.

3. Sew the rubber band on the edge of the boot shaft.

4. In this way, when you wear boots again, you will no longer be as loose as before. The shaft of the boot is thinner under the action of the rubber band.

Clothes can be changed to be thinner, but shoes can't, because designers design according to the standard of human foot shape. There is no standard and it is not coordinated, the shoes have circumference and fat, the boots in the north are large, and the boots in the south are thin, please choose the boots that suit you. Yanfei dance shoe store can be visited.

No, you can't! This is because the excess material has to be cut off and re-sewn, but the finished boots cannot be sewn together by putting them on a sewing machine

You can change it, go to a professional leather shoe beauty shop to deal with it, it is not difficult to change, you can ask for it.

OK. Professional leather repair shops, can modify the style of leather shoes, all with leather related to many businesses can be done, such as: pointed toe to round toe, or change fish mouth shoes, big shoes to small, add shoes tripping, plastic surgery, beauty, gluing, stitching, broken top, last, change steel bars, add front and back feet, change the heel, change the whole sole, sneakers, suede shoes, leather clothing, bags, gloves, sofa, cleaning care, color change, sterilization and deodorization.

If you are in Suzhou, you can be recommended to go to Harry Repair Shop, their service will definitely make you satisfied.

Yes, but it is not recommended to change it yourself.

Some professional points of shoe repair can be changed according to the requirements. There is professional equipment, and it is not so ugly after the change.

1. Thick sock extrusion method.

Wear thick cotton socks at home, and then put on smaller boots, and walk around to make the boots bigger.

2. Hair dryer blowing method.

Use a hair dryer to blow on the small part of the boot for 20 minutes, every half hour, more than three times. According to the principle of thermal expansion and cold contraction, the shoes will become larger and more sensitive to rent.

3. Newspaper Law.

Take a piece of newspaper, knead it into a tight ball after the trip, dip it in some water, not too wet, but the whole ball should be stained with water, and then take a piece of dry newspaper to wrap the wet newspaper and stuff it in the shoes to squeeze the part of the foot. Finally, seal the shoes in a plastic bag and leave overnight.

Guidelines for handling materials: rubber bands, needles, thread.

1. Wrap the rubber band around the leg, tighten it a little, and cut it to a suitable length.

2. Stitch the two ends of the rubber band.

3. Sew the rubber band on the edge of the boot shaft.

4. In this way, when Sun Zhaoliang wears boots, he will no longer be as loose as before. The shaft of the boot is thinner under the influence of the chain of rubber bands.

Prepare materials: rubber bands, needles, thread.

1. Wrap the rubber band around the legs, tighten a few balls, and cut the appropriate length.

2. Stitch the two ends of the rubber band.

3. Sew the rubber band on the edge of the boot shaft.

4. In this way, when you wear boots again, the potato stool orange will no longer be as wide and loose as before. The shaft of the boot is thinner under the action of the rubber band.

Prepare materials: rubber bands, needles, thread.

1. Wrap the rubber band around the leg, tighten it a little, and cut it to a suitable length.

2. Stitch the two ends of the rubber band.

3. Sew the rubber band on the edge of the boot shaft.

4. In this way, when you wear boots again, you will no longer be as loose as before. The shaft of the boot is thinner under the action of the rubber band.

Hello, I have inquired for you: x091, thick socks squeeze method to wear thick cotton socks at home, and then put on small boots, walk around, you can stretch the boots bigger. 2. Wet towel methodIf the new shoes are too small and the feet are clamped, you may wish to cover the wet with a wet towel, and then use the shoe wedge to prop up, and it will be smooth to wear.

3. The hair dryer method uses a hair dryer to blow the hot wind where the feet are squeezed, blow for a few minutes and stop, and then blow for a few minutes and then stop, so that it is repeated several times, and the place that has been blown is softened a lot, and then apply a layer of hand cream with thick oil, and the place where the feet are squeezed will be relatively loose, but this method is only suitable for leather shoes. Extended information: daily maintenance of boots 1, boots should be maintained once a week, if you feel that you are too hard to oil, you may as well try to take it to the shoe shine shop to maintain, the effect is very good.

2. To let the leather shoes rest at a certain interval, it is best to have several pairs of leather shoes to be worn in rotation, because the boots after a day need to breathe and rest in order to have a longer life. 3. When the zipper is not smooth, apply a little wax to the zipper to keep it smooth. 4. In order to prevent oxidation and rust on the surface of the metal buckle, it can be protected by transparent nail polish.

Yes, but it is not recommended to change it yourself.

Some professional points of shoe repair can be changed according to the requirements. There is professional equipment, and it is not so ugly after the change.

No, you can't! This is because the excess material has to be cut off and re-sewn, but the finished boots cannot be sewn together by putting them on a sewing machine

1. If the boots are too wide because your legs are too thin, then you can increase the "leg circumference" appropriately, and you can wear a longer cashmere socks, but this will make your legs thicker. If the boots are too wide, then we can go to the place where the shoes are repaired and ask the master for a wide rubber band, measure the size at the place just above the knee, just a little tighter, and then the boot is also a Zen bench above the knee.

2. In the mouth of the shoe, test along the upper mouth of the false line position of the car a tight, that is, convenient and effective 1 leather, you can add a small belt buckle, Xiaohong so that you can scale freely. 2.Punch a few eyelets symmetrically on the top of the tube and wear a pair of laces to match, which is both beautiful and effective.

3. If the mouth of the boots is large, you can put the boots on your feet first, and then blow the mouth of the boots from the bottom to the top with a hair dryer, and fix it by hand until it fits. Then you can wear more inside.

I cut a high height mouth on the side of the boots and do not cut it to the heel position. Find a piece of tall boot material to widen (only like a triangle, i.e. the cuff of the high boot is wide at the top and the heel is narrow at the bottom).

Leather soft boots due to the problem of technology, wear for a long time will be due to walking caused by the bending of the knee, and deformation, if their own conditions allow, you can buy knee boots, boots and thighs, so that the cuff will not become loose, and stylish.

If it is a general fabric boots, it will naturally be looser when worn, if it is a leather boot, it will not be deformed, so the boots can not become fat, and you can only choose the boots when you buy boots. Or you can also get to the place where the boots are sold and see if they have a way to make the boots a little looser.

Find someone who is a little fatter to support it first, and you will be fat.

This seems to be difficult, but the effect of holding is not very large!

Make your legs thinner and your boots fatter.