The meaning of the motherboard plug in in English, what does the English meaning of the motherboard

Hddled hard disk indicator, PWR SW is the power switch, REST is the restart switch, PWK LED is the power indicator, Keylock can be plugged in without plugging, and speaker is the buzzer.

HDD LED Light, PWR SW Power Switch, REST Reboot, PWK LED Power LED Light, Keylock Keypad Number Switch, Speaker Motherboard Buzzer.

hddled hard drive light.

PWR SW power switch.

PWK LED power light.

Keylock keypad lock.

speaker.

REST is also not a power switch, but a reboot.

hddled is the hard disk working indicator There are positive and negative poles.

PWR SW power on key Non-polar.

REST restart key Non-polarity.

The PWK LED power supply working indicator has a positive and negative pole.

Keylock keypad lock (generally useless).

Speaker PC speaker.

hddled is the hard disk working indicator.

PWR SW power on key.

REST restart key.

PWK LED power supply working indicator.

Keylock keypad lock.

speaker is powered on.

hddled hard drive light cable.

PWR SW power-on jumper.

PWK LED boot light cable.

REST restart jumper.

speaker alarm jumper.

keylock ？？

1. Power switch cable.

When connecting the power switch cable, first find the two-pin plug marked "Power SW" from the cable on the chassis panel, which is white and brown, and then plug it into the pin marked "PWR SW" or "RWR" on the motherboard.

2. Reset the switch connecting wire.

It is used to hot-start the computer. When connecting, first find the two-pin plug marked "Reset SW", which is white and blue, and then plug it into the pin marked "Reset SW" or "RSR" on the motherboard.

3. Power indicator cable.

First, find the three-pin plug labeled "Power LED", the middle wire is empty and the two ends are white and green, and then insert it into the pin marked "PWR LED" or "P LED" on the motherboard.

Reminder: The power switch connection line and the reset switch connection line can be plugged in at both places, pay attention to the positive and negative problems of plugging, and how to plug in. However, due to the use of light-emitting diode to display the work and rest of the power indicator side wiring, the connection is resistant to Wang Heng and directional.

Some motherboards will be marked with the words "P LED+" and "P LED-", we just need to connect the green end to the P LED+ pin and the white wire to the P LED-pin.

4. Hard disk indicator cable.

First, find the two-pronged plug marked with ", and plug it into the pins marked with "HDD LED" or "IED LED" on the motherboard. Pay attention to directionality when inserting. Generally, the motherboard will be marked with "HDD LED+" and "HDD LED-", and the red end will be connected to the HDD LED+ pin, and the white will be plugged into the "HDD LED-" pin.

5 speaker cables.

First, find the four-pin plug of the "speaker", the two wires in the middle are empty, and the ends are red and black, and insert it into the pins marked with the word "Peaker" or "SPK" on the motherboard. Red is inserted into the positive pole and black is inserted into the negative pole.

Actual. Power switch: white + positive, brown - negative can be plugged in and out.

Reset switch: white and blue, front and back plug can be casual.

Power indicator: green plug in on the P LED+ pin, white plug in on the P LED pin.

Hard disk indicator: green plugged in "PLED+", white plugged in "HDD LED-" pin.

Speaker: Red plug in the positive pole, black plug in the negative pole.

That place to look carefully, in addition to the word on the line power is to turn on and off the two lapping needles reset is to restart and a speak is which branch to transport a small speaker generally close to the corners of the main version is positive Li Liangji Other redundant can be ignored.