How to prepare epoxy resin mortar, how to use epoxy resin mortar

Ordinary epoxy mortar raw materials are: epoxy, acetone, dibutyl ester, ethylenediamine, sand, cement, of which cement is not used, sand must not contain moisture, reference ratio: epoxy (e-51):

Ethylenediamine = 12 15:1, add 50% acetone, dibutyl ester, add 3 5 times sand (different thicknesses, different multiples that can be added), to ensure that the premise of construction can be as dry and thick as possible, and at the same time can not be too thick, otherwise it is easy to crack. The cost of 1 cubic meter is 15,000 to 20,000 yuan.

The raw materials of the new water-based epoxy mortar for rapid curing are: Hanzhong water-based epoxy resin H123A, Hanzhong water-based epoxy curing agent H123B, tap water, cement, sand, stone (no requirement for moisture, water should be added itself), reference ratio: Hanzhong water-based epoxy resin H123A:

Hanzhong water-based epoxy curing agent H123B =, plus 1 times of tap water, plus about 15 times of cement sand and gravel, the cost of 1 cubic meter is 5000 7000 yuan, and the strength is 50MPa in 3 days;

The raw materials of the new water-based epoxy mortar are: Hanzhong water-based epoxy resin H223A, Hanzhong water-based epoxy curing agent H223B, tap water, cement, sand, stone (no requirement for moisture, water should be added itself), reference ratio: Hanzhong water-based epoxy resin H223A:

Hanzhong water-based epoxy curing agent H223B =, plus 1 times the tap water, plus about 15 times the cement sand and stones, the cost of 1 cubic meter is 5000 7000 yuan, and the strength is 30MPa in 3 days

Each with its own, and then apply it layer by layer, you can contact me.

1. Cleaning the base surface 2, cleaning and checking the substrate 3, epoxy resin primer coating and coating, pay attention to the balance between the construction progress and the materials when the construction ingredients are burned, and do not cut too much material at one time, so as to ensure that the material is still in line with the usable time when coating, and is brushed before gelling, so that the material maintains good permeability and ensures the bonding performance; 4. After the primer is cured, first use epoxy resin to coat quartz sand and scrape the epoxy quartz mortar n times to increase the thickness of the entire paint film and strengthen the physical properties of the paint film such as compression and impact resistance; 5. Epoxy demolition resin soil coating 6, epoxy resin surface coating 7, on-site cleaning and maintenance, floor maintenance.

Epoxy resin mortar is a mixture of epoxy resin and quartz sand, which has a high viscosity slurry.

Epoxy grout. LD-007 epoxy grout includes A (resin), B (hardener), C (filler) three components, the product uses high-quality resin and refined filler, 100% solid content, no solvent and other volatile harmful substances to the human body.

The three components of each group of materials are completely mixed at room temperature and can be used without adding any additional ingredients. LD-007 epoxy grout provides a permanent solution for secondary grouting installations in areas that require vibration, impact and chemical corrosion for a long period of time, and has been proven to greatly extend the operating cycle and component life of moving equipment.

Extended information: The surface of the concrete in contact with LD-007 epoxy resin grout must be chiseled off the surface of the slurry and exposed to a solid base layer to ensure that the grout surface is clean, dry and grease-free. The outer edge of the concrete joint surface is ground out with a thickness of 25mm chamfered edge to increase the bonding area between the grout material and the foundation at the edge, and the metal surface to be bonded should also be free of rust (to meet the finish requirements of SSPC and SP6).

Uses: 1. It is used for the secondary grouting installation of high vibration equipment such as compressors, pumps, stamping machines, pulverizers, ball mills, etc.

2. It is used for grouting in the base area of equipment that is susceptible to chemical erosion.

3. It is used for grouting in strong pressure areas such as track foundation and bridge support.

4. It is used for anchor bolts, steel bar planting and concrete reinforcement of building structures.

Material ruler fast material name: epoxy resin, curing agent, toughening agent, thinner. Chemical Name:

6101, ethylenediamine, dibutyl ester, acetone. The mix ratio of epoxy resin mortar is: 6101 epoxy resin:

Ethylenediamine:cement:sand = 100:

500。Preparation process of epoxy base solution: epoxy resin is heated to 60, dibutyl and acetone are added and mixed well, and ethylenediamine is added and mixed well.

The epoxy base solution is used as a solvent here. Epoxy sand pulp preparation process: epoxy resin is heated to 60, dibutyl and acetone are added and mixed well, ethylenediamine is added and mixed well, and then the filler preheated to 30 is added and mixed well.

Summary. Hello, I have seen your question and am sorting out the answer, please wait a while What is the mix ratio of epoxy resin mortar?

Ethylenediamine:Dibutyl ester = where ethylenediamine is the curing agent and dibutyl ester is the diluent. After the epoxy resin mortar has a certain strength, the cement-water glass slurry or epoxy resin slurry is pressed under pressure.