Does win7 need administrator privileges to delete a new user?

Yes, you need administrator permissions, you create a new user and log in with this new user, if you are the first account then it is the administrator, depending on your situation, if the new user you create is an ordinary user, then you need the password of the administrator account before you delete other users.

It's just that the administration user is hidden by Microsoft, and the administration user has the highest permission!

How to get the highest authority in win7, generally use the following operations immediately after reinstalling win7, click, [start] - [control panel] - [management tools] - [computer management] - [local users and groups] and then click [users] on the right to see how many local users there are:

Step 1: Right-click on the Administration administrator, select Properties, remove the [Deactivated] checkbox from the selection, and click [OK]!

Step 2: Right-click on the username you customized when installing the system, select Attributes, check the [Deactivated] checkbox, and confirm!

Step 3: Restart your computer! You will find that the user you are using is the administration administrator with the highest privileges!

PS: This method is usually recommended to be used best when reinstalling the system, if your custom user has installed a lot of software, then you can use the administration administrator, but all the software of your custom user has to be reinstalled to administration!

1. First, right-click the "Computer" icon on the desktop of the computer and select the "Manage" option;

2. Then in the computer management interface that opens, "System Tools - Users" option;

3. Then you will see the user name on the right side, then right-click on the user you want to delete, and select the "Delete" option to delete it.

This account cannot be deleted, you can leave it unpopped, the steps are as follows:

2.Click on "Local Users and Groups" - click on "Users" - right-click on "Administrator".

3.Select "Set a password (or change password)" - and click "Continue".

4.Enter your administrator password, but don't enter a new password, and don't enter a confirmation new password, 5Click OK

Shut down and restart to see if it works.

The default administrator user in Windows 7 cannot be deleted, because there is no administrator user by default in Windows 7, but there is a default administrator, which is automatically created when the system is installed. If you want to delete the user, you'll need to change it in the registry.

Here are the steps to modify the registry:

Use the keyboard shortcut (win+r) to open the "Run" dialog pants remorse box.

In the "Yun Hu Zhengxing" dialog box, enter ", and then click the "OK" button.

Open the registry and navigate to the following path:

Right-click the default admin username "defaultusername" and select "Permissions".

In the pop-up "Permissions" window, click the "Add" button.

In the drop-down menu of the Add button, select the AdministratorsGroup option.

Click the "OK" button.

At this point, the admin user has been successfully deleted. Please note that before doing this, make sure you have backed up your registry to avoid unnecessary losses.

1. Start menu at the bottom of the computer desktop and click the Control Panel option on the page in the start menu.

2. Click on the user tease account option on the page that pops up.

3. In the pop-up page, click Change User Account Control Settings on the page.

4. Reduce the management authority of the management user to a minimum.

5. Click on the delete account option in the mountain reform section of the user page to complete.

The administrator rights of win7 files can help us use, modify, and delete files at will. If you need administrator privileges when deleting files, Win7 system prompts, then hurry up and take a look at this article to solve this problem.

The specific steps are as follows:

Right-click to select the file you want to delete, and then select Properties.

In the properties of the folder, cut Dan to [Security] and click [];

Select [Add] on the newly popped up high burial page, and then enter [administrators] in [Enter object name to select];

Then click on administrators in the window page, and then tick all the boxes under Allow;

After that, the system will prompt Windows security questions, just select [Yes] directly.

The above is the win7 system failed to delete the file, the method of obtaining administrator permissions is introduced, I hope it will be helpful to all of you.

If win7 deletes the administrator account, it has no impact, and it can be deleted directly. The steps are as follows:

1. The non-administrator account in the administrator user group can be deleted directly.

1) Start - All Programs - Attachments - Command Prompt, right-click and select "Run as Administrator".

2) Suppose there is an admin account, enter net user admin del and press the enter key to delete.

2. The built-in administrator account of the system, do not delete, because Windows defaults to the administrator as the owner of the whole system, and in the Windows system to set the permission of the file, it must be the owner of the file first, so deleting the built-in administrator account will cause a variety of problems in the system. You can disable it if you don't need it. Execute in cmd:

net user adminisrator /active: no

Press Enter to disable the administrator account.

1. Reboot and press F8 to enter safe mode (Note: to select "Safe Mode with Command Line");

2. At the end of the running process, the system will list the selection menus of the superuser "administrator" and the local user "feiwh", and click "administrator" to enter the command line mode. (WinXP system has a process).

3. Directly enter the command "net user feiwh 3302" to forcibly change the password of the "feiwh" user to "3302", if you want to add a new user (such as the user name is intels, the password is 3302), then enter "net user intels 3302 add", and you can use "net localgroup administrators intels add" after adding The command promotes the user to the user of the system administrator group 'administrator' and gives it super privileges.

4. Restart the new account (intels) again, enter the normal mode, tick off the "account disabled" option in the figure above, restart it after confirmation, and log in with the original administrator.

Put the win7 installation disc into the optical drive,Repair and install。

Win7 enabled"administrator"Accounts.

Right-click on the computer Manage Local Users and Groups Users Right-click"administrator"Select the account attribute, remove the tick in front of "Account disabled", and press OK.

First of all, confirm whether it is a system file, because it is a hidden file, if it is, it cannot be deleted before it is completed, and sometimes the deletion will appear.

Soft hands that can't be deleted are cleared of files, files, or folders.

Workaround:

1. Press F8 to power on and do not move, to the advanced option appears in the release hand, and use the up and down keys to select the safe mode.

Follow the prompts to enter the safe mode and delete it (the safe mode operates the same as the normal mode).

2. If you can't delete it by other methods, you can choose the unlocker forcible deletion tool to delete, right-click the file you want to delete after installation, select unlocker, and then select delete to completely delete the file you want to delete (similar software has QQ computer manager.

360 Guardian and Jinshan Guardian have the function of smashing files).

del /f /a /q\\?1

rd /s /q\\?1

File - Save As"Delete. bat

You can choose your own name, but the suffix must be".bat")

Then, drag and drop the files or directories you want to delete into the bat file.

icon on the delete.

4. Sometimes I turn off the computer and try to clear the deleted files immediately after turning it on, and sometimes I open the files to be deleted one by one and delete them, which is also effective.

5. Use PE disc and PEU disk to enter the system to delete files.

1. Open the "Start" menu and select "Run" program.

2. Open the run window, enter the command, OK, and open the Group Policyr.

3. In the options on the left, select "Computer Configuration".

4. Open Windows Settings - > Security Settings - > Local Policies - > Security Options.

5. Drag to the bottom, find the item "Account: Administrator Account Status", and double-click this item.

Right-click on the computer - Manage - Local Users and Groups - Users - Right-click on the account that needs to be hidden and tick "Account is disabled".

Profiles can be deleted. I've deleted it.

Create another administrator account first, log in to the account, disable the administrator account (built-in account) by Group Policy, then right-click on my computer, System Advanced Settings, check the Advanced tab, and then click the user profile settings button, select the built-in account, and click the delete button.

Hope it helps.

You can see it here**.