What CPUs does the Intel D945GTP motherboard support

The motherboard of the 945 generally does not support 45nm CPUs, so the E5000 E7000 E8000 and E9000 series CPUs are not supported.

The motherboards of the respective 945 can support 45nm CPUs by flashing the motherboard BIOS, but it depends on the model.

Core 2 CPU E6300 Your motherboard supports but is discontinued for about 350 yuan, you might as well buy Pentium E2180 is also a core core, and the performance is much stronger than Core E6300.

The Core E6300 is not the new Pentium E6300, and the new Pentium E6300 cannot be used on your motherboard.

945 Core supports E2000, 4000, 6000 series, 65nm.

The new ones are hard to find, and the ** of 2 hands is also relatively high, and the e4600 is more than 400.

The e6300 is more than 500.

E5000, E7000, 8000, 9000 are not supported.

Downstairs don't understand don't mislead people, can support also p3x p4x what to do,

There's something slightly wrong upstairs.

It should be supported by all Intel processors with LGA775 sockets, including E5000 7000 8000 9000

It's just that it may not support frequency multiplication.

The Intel 945 motherboard can support CPUs with LGA775 interfaces with a front-side bus of 1066MHz or less.

For the types of CPUs supported by the 945 motherboard, there are: Inter Celeron D, Pentium 4

Pentium D and many other types of CPUs.

For example, the Inter Core 2 Duo E 6700 and the Inter Core 2 Duo E 5200, this CPU is relatively well matched with the 945 motherboard, and many functions are also best reflected because of this good compatibility.

The Intel 945 motherboard is a very old motherboard, and the CPU that is suitable for it is an old model, and now the performance is very low.

For the types of CPUs supported by the 945 motherboard, we know so far: Inter Celeron D, Pentium 4, Pentium

D and other types of CPUs, of course, with the rapid development of CPUs, we have only reached a lot of impossible has become possible, which means that the 945 motherboard will support more and more types of CPUs, and then we will learn about some of the specific parameters and models of the CPU supported by the 945 motherboard.

The 945 motherboard supports the LGA775 interface of Pentium 4, Pentium D, Celeron D, and Core 2 processors.

Such as P4, Pentium D, Celeron D430, Core 2 E4500, etc.

LGA775 interface can be supported.

Celeron D Pentium series.

Pentium D series.

Core E4, E6 series.

It should be noted that the 945 only supports processors with a maximum of 1066MHz bus, so the Core only supports the first generation Core, such as the classic E6300 and so on.

Yes, the Core 1066 front-side bus can be supported and, many can look at it!

Hello, question about the CPU upgrade.

1. From a theoretical point of view, it is usually possible to upgrade the CPU. The CPU of most computers is a separate part, which is installed on the CPU interface of the motherboard, so the CPU can be upgraded; However, there are also some computers whose CPU and motherboard are integrated together and cannot be removed, and if this is the case, the CPU cannot be upgraded.

2. Based on the actual situation, it is not recommended to upgrade the CPU. Because upgrading the CPU involves many factors, in addition to the need to consider that the CPU to be upgraded meets the requirements of the motherboard, such as: socket type, core code, bus frequency, core voltage and other technical factors, you also need to consider heat dissipation, motherboard BIOS and other factors.

The CPU can only be upgraded if all the requirements are met, but the performance gain is very limited.

3. From the point of view of cost performance, the CPU is usually expensive, but the performance improvement of the computer is very limited, so it is not recommended to upgrade the CPU

Hope it helps.

Yes, but it only supports the highest Pentium D processor, and the current mainstream Core 2, Pentium E series, and Celeron series do not support it.