Two computers share each other s hard drive problem 30

OK! You first set the drive letter of the hard drive you want to share to share first, and then see if there is a shared drive letter in the online neighbor, and then go to another machine, also check the online neighbor, see if there is a shared drive letter, if there is, then click to open, find the file you want to share, and pull !!

You'd better unify the working groups of the two machines and change them to one working group.

XP System Change Working Group: My Computer Right-click Properties --Computer Name--Change (Restart) Share: Right-click on the file you want to share -- Share -- Check to share this file on the network.

Don't forget to install the network installation wizard!

When you're looking for a share, just go to my network -- the workgroup -- and you'll be able to see each other's shares.

If it is a 98 system, you want to install the protocol.

Of course. Settings"Home or small office network", which can be set up in the online neighborhood. After setting up, add the NWLINGK IPX NetBIOS protocol and turn off the built-in firewall of Windows to share files.

Right-click on the disk, share, the agreement is correct.

Listen to the second floor, that's how we do it in school, and sometimes we don't save face by opening the firewall.

After the 2 hosts are shared, share your partition separately on computer A and map the partition of computer B to local on it.

My computer - right-click - properties - computer name, set the two computers as the same workgroup, as long as you are in a gateway you can share, the way to share is, right-click on the disk you need to share - share and secure - and then share is OK!

For example, set "D drive" on computer A to share, and computers A and B to share.

Method: 1. Right-click on the D drive - Properties, and select "Advanced Sharing" on the sharing page.

2. Tick "Share this folder" and click "Permissions".

3. Check "Full Control" in the permissions of the "everyone" user (if you don't have this account, you need to create it yourself).

4. Then, inform computer B personnel of this network path.

5. Share as follows.

Two computers share hard disks and folders.

Create a folder with your laptop, put your information in this folder, and then share the folder and allow others to change the content, so that the desktop can read and modify the content in the shared folder on the phone by sharing.

Start by building a local area network.

There are many ways. Two machines can establish a peer-to-peer network.

It is also possible to use a router.

Set up the same workgroup after the LAN is set up.

Then set up sharing.

Cloud storage, dear!

Now is the cloud era, you can apply for a 360 network disk. Install it separately on your desktop and computer, and the network disk will create a local synchronization folder on both computers, so you can synchronize it at any time.

Set up a shared folder directly on your notebook, then access the shared folder on your desktop, and store all your materials in the shared folder, so you don't have to take the test.

A large-capacity USB flash drive, plus a synchronization software, such as GoodSync

You can use a network cable to create a shared directory.

Can it be connected to an external hard disk, or two computers interact wirelessly.

Two computers together can share all the data on the hard disk by setting up local area sharing. The details are as follows:

1. Both computers are connected to the same router.

2. Right-click on the desktop network --- properties --- change the advanced sharing settings.

3. Select Public Network --- select the following options: Enable Network Discovery--- Start File and Printer Sharing--- Enable Sharing So that users who can access the network can read and write files in public folders (can not be selected) - Turn off password protection sharing (other options use the default).

4. Save and confirm.

5. Select the folder or drive letter that needs to be shared, and right-click - Properties.

6. Open the Security tab - select - Add - everyone.

7. Open the Share tab--- select Share --- pop-up dialog box --- add "guest"--sharing.

8. Select Advanced Sharing --Select Share this file --OK.

9. Select Advanced Sharing -- Select Share this file -- Select Permissions -- Add Everyone.

10. Double-click on another computer to open the network, and the folder or drive letter you just shared will appear.

Note: To prevent accidental errors, turn off the firewalls on both computers.

Rich, with two broadbands!!

If it's a broadband, just use a router and set it up to share. Like you, you can install another network card, and then go to the computer store to make a special network cable - a peer cable, with which you can connect the two computers to exchange data.

They are all connected to the LAN port of a router, which is on a local area network and can access each other. Set up the hard disk to share it.

It is best to have a router, otherwise use a long network cable to connect the two computers directly, and then configure the IP to the same network segment.

If the above conditions are met, right-click the disk that needs to be shared, Properties, Share, and assign permissions.

No, if two computers want to share data, they must be in the same local area network, so your two computers must be connected to a router or switch, and then turn on the sharing of the two computers to achieve data sharing!!

Two computers can share a router, set up LAN sharing, you can use your own computer to directly open the shared files of the other computer. Direct transmission with QQ is also very fast, and it can reach more than 1M s in the LAN.

You can set up a LAN to share files.

You can also use a network cable to connect two computers directly, and the network cable connection method is different from the usual Internet access.

Answer: If you want to save files from computer A to computer B, there are two ways, 1. The folder of computer A (built-in files you need to share) is set to share (right-click - share and secure), and the permission is set to read-only (that is, network users are not allowed to change my files); Then set up a guest account and set a password; Then access the shared folder of machine A from machine B through the LAN and copy the file over.

2. Create a new directory on computer B, set it to share, set the permission to writable (that is, allow network users to change files), and then set the guest account on computer B; Then access computer B from computer A and copy the files from computer A to the shared folder of computer B.

Windows XP's local security settings require all users accessing the network to be guests. At the same time, in the user rights assignment of Windows XP security policy, guest users are prohibited from accessing the system through the network. As a result of these two conflicting security policies, other users in the network cannot access computers using Windows XP over the network.

Here's how you can solve the problem.

Method 1: Remove the restriction on guest accounts.

Click "Start Run", enter " in the "Run" dialog box, open Group Policyr, select "Computer Configuration Windows Settings Security Settings Local Policy User Rights Assignment", double-click the "Deny access to this computer from the network" policy, and delete the "Guest" account inside. This allows other users to use their guest account to access their computers using Windows XP over the network.

Method 2: Change the network access mode.

Open Group Policyr, select Computer Configuration Windows Settings Security Settings Local Policies Security Options, double-click Network Access: Sharing and Security Mode for Local Accounts policy, and change the default setting of Guest Only - Local Users to Guest Authentication to Classic: Local Users Authenticate by Themselves.

Now, when another user accesses a computer using Windows XP over the Internet, they can log in as their "identity" (provided that the account is already in Windows XP and the password is correct).

When this policy changes, so does how files are shared, and by enabling the "classic: local users authenticate themselves" method, we can limit the number of users who can access the shared file at the same time, and set different access rights for different users.

However, we may also encounter another problem, when the user's password is empty, access will still be denied. Originally, there was a "Account: Local accounts with blank passwords are only allowed to log in to the console" policy in the "Security Options" policy is enabled by default, and according to the principle of denial priority in the Windows XP security policy, users with blank passwords will be prohibited from accessing computers using Windows XP through the network.

We can simply deactivate this policy and solve the problem.

The easiest thing to do is ask him for his password, enter it in the dialog box, and check Remember password. Not in the future.

If it is helpful to you, please remember to accept it as a satisfactory answer, thank you! Have a great day!

vae la

1。Control Panel -> Administrative Tools -> Local Policies -> User Rights Assignment -> Deny access to this computer from the network -> Delete the guest account from it -> OK.

2。Control Panel -> Administrative Tools -> Local Policies -> Security Options -> Guest Account Status -> Enabled.

3.Turn off the firewalls on both sides, and you should be able to access them.