-
Anonymous users2024-02-05You try the following two software, both of which are professional data recovery software.
finaldata
easyrecovery
Both of the above have their own unique advantages, so it is recommended that you try them both.
Software recovery is a logical area recovery and can only recover part of the data. Don't set the path of the recovered files to the E drive.
If you really have important files to recover it is recommended that you go for physical recovery, and for physical area recovery you have to go to data recovery.
The company uses a professional track scanning tool to recover. Hope it helps.
-
Anonymous users2024-02-04There is a formatted recovery in easyrecovery, which can be recovered, but the recovered file name is like you said, carefully find the files you think are important, don't know what you don't know, it seems that the files are classified by extension, find it and change the name to store it...
-
Anonymous users2024-02-03Hello, I'm doing data recovery! I don't know what exactly you recover at the beginning of the number! But I know that the general data recovery easyrecovery definitely can!
You have to choose which format is recovered, you can also try an R-Studio software that works well! Helpful remember to give points Thank you! Don't understand sending a message to me!
-
Anonymous users2024-02-02finaldata
Try this, but don't get too hopeful.
It's a huge project to find something useful out of a pile of documents, and after doing it once, you don't want to do it again......
-
Anonymous users2024-02-01With easyrecovery you can get it back. But that's not all. Sometimes you need RP+ luck.
-
Anonymous users2024-01-31Don't think about it, if it's just deleted, there's hope, and if it's checked, it's basically hopeless.
-
Anonymous users2024-01-30Hello, it is possible to recover data if the hard drive is broken, you can read my reply patiently, it will definitely help you.
The first case:
It's just that the hard disk is damaged and can no longer be read. At this time, it may be that the internal parts of the mechanical hard disk are damaged, or there are bad sectors inside the hard disk that cannot be read or written, in this case, we cannot repair it by ourselves, and we must open the disk for data recovery. Open data recovery has very high requirements for the environment and professional knowledge, and it also needs to be operated in a clean room, and the relative ** will be higher, in this case, we need to seek the help of a professional data recovery company to recover data.
Recover Hero Hard Drive Open Data Recovery Company.
Common causes of hardware failure of hard drives:
1. When the device is connected to the computer, the power is cut off and the machine is forced to turn on and off for no reason.
2. Hot plugging (strong pulling).
3. Poor contact of computer interface.
4. Bumps and bumps.
These conditions can lead to hardware damage.
The standard recovery process for hard disk hardware failure is as follows:
1: Buy a accessory disk first, the requirements of the accessory disk are the same as the bad disk (data disk), and the same model is best to be the same batch number at the same time.
2: After the accessory disk is ready, take the bad disk (data disk) and the accessories disk to the clean room together, first open the bad disk (data disk), remove the bad head, and put it aside. Then disassemble the good disk accessory disk, take out the magnetic head, and replace it with the bad hard disk (data disk), and the replaced accessory disk can not be used continuously.
3: After replacement, cover the hard disk, screw it, and then connect it to special equipment: MRT, PC3K-UDMA and other devices, do disk image, and start mirroring data.
4: If everything goes well, after the mirroring, all the data will be recovered.
Solid state drive: solid state drive is relatively more troublesome, solid state drive damage is generally divided into main control damage and chip damage, with the update of hardware, there are many brands of solid state, and each model is not the same resulting in different main control, and even the same model of the same hard disk main control is not the same, so that the equipment is not easy to be compatible with the repair of the main control, can only be repaired manually little by little, very time-consuming. Another is that it is necessary to disassemble the chip for recovery, perform flying wires on the chip, and reorganize and recover the logic.
The second scenario:
Even the hard disk can still be recognized, but it cannot be read, written, and used. This situation can be ruled out and fixed from the following reasons:
Cause. 1. Whether the hard disk is aging. We can detect it by replacing the connected computer equipment, and if it is a problem of aging hard disk, it is recommended to back up the data and deprecate the hard disk.
Cause. Second, whether the hard disk is infected with a virus. If the hard disk cannot be read or written due to a virus, it is recommended that you can perform virus scanning and killing on the hard disk, and the data in it can naturally be used normally after the detection and killing, and it will not be lost.
Cause. 3. The hard disk has abnormal data due to some bad habits in the process of use. The most striking feature of this corruption is the prompt formatting. Then this situation can be recovered with ordinary data recovery software.
Very simple! The problem is that you have several hard drives, and when the "file system" format of each partition of these hard drives is wrong, the hard disk often fails to open. >>>More
Handling of bad sectors.
Repair or hide bad sectors of the hard drive after they are found to prevent them from spreading. >>>More
1. You hook this hard disk to other computers to do slave disks, and see if you can find them when you self-check the computer, 2. If you find them, enter the system to see if there is a disk letter, if not, open the PQ partition program to see if you can detect it from the disk, 3. If you can't do it, please enter the control panel--- management tools--- computer management--- point "disk management" to see if there is a detection of the disk, 4. All of the above are invalid, and they basically have to be repaired!
Mobile hard disk is the hard disk of a laptop, mainly used for storage, etc., plugged into the computer for a long time, due to the closure of the hard disk enclosure, it will lead to overheating and affect the service life.
I don't know if the landlord asks about the hard disk damage is hardware or software, the software damage will generally occur, file loss, capacity size display error, partition loss, program operation is not normal and other phenomena. If the hardware is on, there is generally an abnormal sound of the active motor of the hard disk, an abnormal sound of the servo motor of the magnetic head, a power-on and boot display that the hard disk or the hard disk partition with boot data cannot be found, abnormal entry into the system, abnormal file reading and writing, etc. Generally speaking, the hard disk is a relatively durable part, and the probability of physical damage to the hardware is not high, but this is a delicate thing, and the distance of the head suspended on the platter is calculated in microns, so it is particularly afraid of vibration, and the violent vibration will cause the head to hit the platter, resulting in disk data loss and physical damage. >>>More