-
Anonymous users2024-02-05The default phone password is 12345. The default restriction passcode is 0000; The default pin1 code is 1234.
If not, please refer to the following method:
Nokia directives.
6110, 8810, 3210, etc.
Software Version.
Software release date.
Phone model Factory date.
Serial number The date of purchase.
Last repair date.
Activates HR mode, but consumes 30 battery
Close (id
EFR mode is activated, but power is consumed.
Close (id
Power saving.
3210 Unlock SP Lock
1. Press the C button.
2. Press the key button.
3. Press the C key until the screen clears.
4. Press and hold the * key until it flashes.
5. Press and hold the * key again until it flashes.
Enter 04 * PIN code * PIN code * PIN code .
Nokia Unlock Instruction [Original].
Nokia Mobile Test Instructions.
1. Original password 12345
2. After the Nokia series mobile phone uses the unlocker to read out the password, there is an error when entering the mobile phone, and it cannot be unlocked. The reason is.
Too many input errors. You can re-enter it after half an hour of powering it on.
Nokia can call in but not out: If there is a "2" in the upper left corner of the display, press the button for two seconds, and then press OK.
Just admit it. If "2" is not displayed, press "Function Key" + 6 + 1 + 4 + 2 and then press Confirm.
Nokia: 6110, 8810, 3210, etc.
Software Version.
Software release date.
Phone model Factory date.
Serial number The date of purchase.
Last repair date.
Activates HR mode, but consumes 30 battery
Close (id
EFR mode is activated, but power is consumed.
Close (id
Power saving.
3210 Unlock SP Lock
1. Press the C button.
2. Press the key button.
3. Press the C key until the screen clears.
4. Press and hold the * key until it flashes.
5. Press and hold the * key again until it flashes.
Enter 04*PIN *PIN *PIN *PIN
N7650 Factory Reset* (Full Recovery, Resolve Program Errors).
-
Anonymous users2024-02-04PIN 1 code] In order to ensure that your mobile ** is not stolen after loss, each SIM card can be set up with a set of personal password (PIN code), lock the SIM card, and set a four-digit password by yourself; The PIN is usually referred to as PIN 1, which is used to protect the security of the SIM card; The initial PIN code is 1234.
PUK code] PUK code is composed of 8 digits, when the PIN code is entered wrong 3 times and is locked, you can use the PUK code to unlock, a total of 10 times to enter, more than 10 times, the USIM card will automatically start the self-destruct program, so that the SIM card is invalid; You can only re-go to the business hall to replace the card.
-
Anonymous users2024-02-03The one on the first floor doesn't know how to pretend to understand! Don't believe it! You can do it on the 2nd floor and 3rd floor! The initial PIN defaults to 123456
PIN 2 code is PUK code! Call 10060 or 10010 and press the voice prompts to get it!
-
Anonymous users2024-02-02Hello, the PIN code to ask the mobile operator, not the range provided by Nokia.
You can call 10086 (China Mobile) or 10010 (China Unicom) to ask manually.
PIN code and confidential horse are essentially different, two different things entirely.
Upstairs wzdsyxt111 said that the donkey's lips are not the horse's mouth, it's funny, it's completely a layman.
-
Anonymous users2024-02-013280 scrambling cover password, please refer to the following methods.
1. First try the following passwords: "12345", "00000", "99999".
Two: Factory reset with Phoenix (you will lose your phone data during this process, it is recommended to back up important data first). 1. Open the phoenix.
Connect your phone and select Nokia mode. Then click File and select your phone to connect to Phoenix. 3. Select testing—>factory pop-up dialog box, select factory set full, click write to select yes, and select yes.
At this time, the phone will automatically shut down and change to test mode) After the factory reset is completed. Click OK. This is the drop-down table for selecting Operating Mode, selecting Normal, and the phone will automatically restart after a while, and the password will naturally be restored to 12345.
Three: Use NSS software to restore factory settings, restore the password to 12345 (this process also loses mobile phone data, it is recommended to back up important data first). 1. Open the NSS software, connect the phone to the computer, and select Nokia mode.
2. Click the magnifying glass. 3. Select tools. 4. Click Read.
5. NSS is connected to the mobile phone. 6. Select Factory Settings. 7. Select full and click reset to restore the factory settings.
The security code has also been restored to 12345. Although the NSS shows an error after the recovery is completed, you will find that the stuffy phone has been restored to factory settings.
Four: Take the phone to the flash.
Hope the above methods can help the landlord solve the problem.
I know that the team of Steel Seven Company will answer for you, thank you.
-
Anonymous users2024-01-31I can, it doesn't matter the color, just send me your phone.
This version of the Hunter is already the most powerful. The next version of the LR will be a cup, I see your equipment. >>>More
That means you can wash the battle thief ... Basically, the shoulders and hands can be changed, and other equipment can be used with parts, but the speed is enough, and on the basis of maintaining the basic data Hit, Accuracy, and Critical Hits, this version of the set of attributes is useless for the destruction thief.
Nokia. It's all good.
Attention, I have encountered the same problem as you, don't be afraid to lose it, to the customer service to repair the machine only need to flush the machine to electricity, and in all parts of the country, you have a record in the machine, customer service can check whether it is a licensed parallel import, and if it is not within the warranty period, do not need to bring an invoice, and if it is out of the warranty period, it will cost money, and it is very expensive to repair there, it will be no problem during the warranty period, rest assured to go!
a.* —Phone hardware and software reset: In standby mode, input. >>>More