What kind of sour jujube core bracelet can be disced, and the benefits of sour jujube wood bracelet?

The sour jujube core bracelet is a relatively niche product, more playable, and there are not many jujube cores with disc play value, so it is still more difficult to find a good string.

Sour jujube wood bracelet, efficacy: calming the heart, calming the nerves. Performance: Calm the nerves, absorb sweat.

One of the earliest medicinal books in China, "Shennong's Materia Medica", recorded: "Nourishing the liver in the body, strengthening the muscles and bones, and helping yin qi, all of which are the merits of sour jujube kernels." Li Shizhen's "Compendium of Materia Medica" in the Ming Dynasty recorded that jujube kernel "is familiar with the treatment of gallbladder power, sleeplessness, polydipsia, and sweating; Raw treatment of gallbladder heat and good sleep, all of which are enough to syncope yin and less yang medicine.

Quote from Ronacedo, <>

Folk believe that the sour jujube branch sour jujube core has the effect of warding off evil spirits, and the position of the bracelet has a surgical position, and the sour jujube core has a massage effect on the position, which is beneficial to the heart. How to make the core of sour jujube bracelet After eating sour jujube, the "jujube core" must not be thrown, they can also be made into a hot fried "Bodhi", and it is a five-eyed Bodhi! Because there are five holes in the oval core.

It is also a good choice to make a bracelet by punching a hole. The first step: the selection of materials to make beads, the most important thing is the selection of materials, "ten sandalwood and nine empty", if you buy wood only to see the beautiful appearance, it is likely to be pulled home, after cutting, the inside is empty, black, you will lose money.

Therefore, when selecting materials, it is necessary to estimate whether the log is hollow according to the volume, weight, density, etc. of the wood. Step 2: Slice directly on the saw, the saw blade should also try to choose a very thin kind, because too thick saw blade will consume too much wood, which is called thick saw blade "eat meat" too much.

Step 3: Planning the size This step is to plan the size of the beads on the slice, generally speaking, the beads you want to do, you want to draw the circle, the purpose is to avoid the beads have cracks and white skin. Another reason is to ensure the quality and leave a certain distance between each original piece, this is to facilitate the space left by the saw blade when sawing the blank.

The circle can not be drawn too small, so that the processing and polishing will be easy to hurt the beads in the future, resulting in a very low bead rate, but the circle can not be too large, too much waste of red sandalwood, it is a pity that it cannot be used reasonably, so according to experience, it is larger than the beads that want to be made. This maximizes the use of wood and avoids damage during the bead processing process. The fourth step, the car out of the bead embryo this step is very critical, to be very careful, focus, because the sawtooth is very sharp, accidentally will hurt the bead embryo, resulting in damage, reduce the bead rate, but also pay attention to their fingers, if you hurt the finger will be in trouble, so to concentrate.

Step 5: Punching the bead embryo is done, this step is the punching, punching is a meticulous work, to concentrate on it, can not be crooked, the crooked beads will be invalidated. A few years ago, it was an old-fashioned machine, and the holes punched out were big and thick, which was not good-looking, but in the past two years, it has been a new equipment, and the holes punched out are small and exquisite.

Step 6: Ball out This is a very important step, and it also has a great impact on the final yield. The first step is to replace the beads with arc-shaped knives of different sizes according to the size of the beads to be processed.

Then fix the small cylindrical column horizontally on the equipment, start the machine, make the small cylindrical column rotate at a certain speed, and the rotary knife next to it will also rotate to cut the cylindrical column into ball beads. Step 7: Hand polishing This step is a great test of the master's skills.

First, the coarse surface of the log, with an angle grinder, and then with sandpaper, in order from coarse sandpaper to fine sandpaper sandpaper, from 180 mesh - 320 mesh - 600 mesh - 1000 mesh - 1500 mesh - 2000 mesh - 3000 mesh. The specific number of grinding mesh is generally 600 or 2000 mesh according to the different needs of the market.

Please refer to below.

It is not an exaggeration to say that the jujube tree is a treasure, and the jujube tree has a high utilization value from the fruit to the branches to the roots.

First of all, the fruit of the jujube tree has high edible value. The flesh of the jujube tastes sweet and sour, and contains a variety of trace elements needed by the human body, such as potassium, sodium, iron, zinc, phosphorus, selenium, etc., not only that, but the vitamin C content of the jujube is amazing, and it can be said that it is the best among all fruits. Edible jujube can not only appetize and strengthen the spleen, quench thirst, eliminate food and stop stagnation, but also invigorate qi and spleen, improve symptoms such as disgrace and dryness, and play a role in disease prevention, anti-aging and longevity.

Jujube kernel also has a high medicinal value, with the effect of calming the heart and calming the nerves, sweating and rejuvenating, can be used for the situation of poor sleep quality, palpitations and forgetfulness, body weakness and sweating and dry mouth, and also has a certain sedative effect.

The wood of the jujube tree is not only hard but also delicate, which is a good material for carving, especially the root carving or root art made from the roots of the jujube tree, which can better reflect the wood characteristics of the jujube wood. The natural dead jujube wood, those beautiful colors and textures are very charming.

In addition, the roots of the jujube tree can be used for medicinal purposes, which can lead to a variety of diseases and have high medicinal value. Even the jujube pits can be used to make many exquisite crafts, such as bracelets, necklaces, and more.

The role of the roots of the jujube tree.

The root of the jujube tree has a high medicinal value, and can exert different effects according to different prescriptions, **different diseases.

The following is an introduction to the different recipes and effects of several sour jujube tree roots.

1. Indications: neurasthenia, intractable insomnia.

Prescription: One tael of sour jujube tree roots (without peeling), four coins of salvia.

Usage: One dose a day, decoction with water for 1 to 2 hours, divided into 2 times during lunch break and at night before bedtime, generally cured after 15 doses.

2. Indications: poor sleep quality, insomnia.

Ingredients: Jujube roots, eggs, rock sugar.

Method: 1. Scrape off the roots of the jujube tree, wash it and chop it into small sections one inch long, which takes about 10 sections.

2. Put the chopped jujube roots into the pot, add an appropriate amount of water, after the water boils, change to a simmer and boil for about 10-15 minutes.

3. Beat in 1-2 eggs, put in an appropriate amount of rock sugar at the same time, stop the fire after the eggs are cooked and eat.

Usage: One hour before going to bed every night, take this dose, eat eggs and drink soup instead of sour jujube roots. It usually starts at night and heals in about 1-2 weeks.

3. Indications: hypertension, dizziness and headache.

Prescription: One or two sour jujube roots (remove the outer layer of black skin, remove the wood heart, and use the inner skin).

Usage: Add an appropriate amount of water to the sour jujube root and decoction it twice, and take it in two parts.

4. Indications: treatment of burns and scalds.

Prescription: Three catties of sour jujube root bark.

Usage: After chopping the roots of the jujube tree, decoction them with water into a paste, apply them to a clean cloth, and stick them on the wounds.

The root of the sour jujube tree has the effect of calming the nerves ** insomnia, and the bracelet has a good effect on soothing the nerves if it is the root of the tree. The surface of the jujube wood bracelet does not have any oxide layer protection, the bracelet is the most easily damaged, and the necessary polishing treatment is required after getting the new original beads to make the surface of the bracelet more smooth and clean, so as to play in the later stage. In the process of sour jujube wood bracelet in the plate, it absorbs the sweat and oil of the human body, and will slowly form a layer of solidified oxide film, commonly known as slurry.

The trunk of the tall jujube tree is hard and tough, which can be used to make bracelets and can also be used to make rural farming tools on the Loess Plateau.

The sour jujube kernel grows in the wild jujube kernel in the north, the shape is very similar to the phoenix eye Bodhi, the hardness is high, the color is reddish-brown, people usually make the jujube core into a sour jujube core bracelet, the sour jujube core bracelet also needs to be red, the method steps of the red are also very simple, let me introduce you to the red method of the sour jujube core bracelet.

The jujube kernel can not only be played, but also used in medicine, it has the effect of improving insomnia and helping sleep. Because of the high density of jujube kernels, the speed of coloring and pulping will be relatively slow. Its method of playing is similar to that of phoenix eye Bodhi, and the red jujube core must not be in a hurry, and you must be patient to make a shiny sour jujube core bracelet.

The steps of the red plate of the sour jujube core bracelet are as follows:

1. Rub the surface of the jujube core with a soft towel for about a week, this is to remove dirt and wax layer, so that the surface of the jujube core is kept clean, and it plays a role in polishing, which is convenient for the subsequent red coloring.

2. Place the sour jujube core bracelet naturally for a week, so that the surface of the bracelet is in uniform contact with the air to form an oxide protective layer.

3. After washing and drying your hands, you can play for about half an hour every day, and after a week or two, a layer of pulp will be formed on the surface of the sour jujube core bracelet. Leave it for another week or so until the slurry hardens.

4. Repeat the plate and place it a few times, and when the sour jujube core bracelet shines, it will be considered red.

The above is the red method of the sour jujube core bracelet, and you can make a shiny sour jujube core bracelet by operating according to the above steps.

1. Clean the pulp of the jujube drupe, soak the jujube kernel with water after picking, then rub the pulp with both hands, seal the water with the rubbed pulp together with a container, and dry it for about a week, and the pulp is basically rotten. After that, take out the sour jujube skin and throw it away, find a container with holes, take out the soaked jujube core and the rotten pulp together, rinse it with water, the rotten pulp will be washed away from the hole in the container, and the rest is the sour jujube core. There should also be some sour jujube peels mixed together, so use a breathable basket to spread the sour jujube kernels in it and dry them in the shade.

After a day of drying, the jujube skin that had stuck to the sour jujube core was basically half dry, and I rubbed it back with my hand to clean up those jujube skins. After it is completely dried, clean up the other impurities mixed with the jujube core, and what remains is a clean jujube core, which can be made into a bracelet in the future.

2. Jujube core drilling, it is best to use a millimeter drill bit when drilling the sour jujube core, if you use a 1 mm drill bit to drill the hole, the eye will be deviated when encountering the middle of the nucleus. Because the interval is very hard, so the hardness of the drill bit of the coarse point is strong, the hole of the drill is not easy to deviate, it is best to use the grinding machine to drill the hole, the hand is easier to master, when I was doing the string, I did not get it well, the fine drill bit used, many of which were scrapped.

3. Wear the jujube core, and finally wear the beaten jujube core with a rope.

1. When making sour jujube core bracelets, ensure the cleanliness of your hands, and do not play with dirty hands. At the same time, don't play with sweat on your hands. Sweat will cause walnuts to get wet, which can crack the jujube kernel and affect the quality of the bracelet.

2. When playing, the best effect is to feel smooth but not astringent. If you notice that your hands start to sweat, stop playing immediately. After insisting on playing, the more the plate loses its luster.

Take a large fresh-keeping bag, hold the peach pit skewer in it, close the mouth hoop with a rubber band on the wrist, play in the bag, wait for the peach pit plate to be wet, smear the hand with a thin layer of human oil or olive oil, continue to play, until the peach pit is sticky, take out the hand, leave the sour jujube core in the bag, and at the same time haze into the bag, quickly seal the bag.

3. Sweaty hands, you can wear the bracelet on your wrist when playing, and use the other back to play, so that you can not get the sweat on your hands, and you will not make the bracelet darker and darker.

4. After playing with the bracelet for a period of time, some dirt is generated, which can be soaked in clean water for about 30 minutes to make the dirt rise, and then use a needle to remove the dirt, and use a toothbrush dipped in water to brush it out repeatedly. Then use a paper towel or cotton cloth to absorb the water, and then dry in the shade for at least 3 days before you can play.

5. The method of drying in the shade, put it in a cotton envelope or paper bag, do not seal it, and then put it in a drawer, preferably after a week, let the moisture of the jujube core be completely gone, and then start to play. This can prevent the cracking of the jujube kernel.

6. The continuation of the red kneading stage is the process of sublimation of sour jujube kernel pulp. Due to our long-term play, the walnut pulp will become thicker and thicker, the outer skin and body fluid of the jujube pit will give full play to the chemical reaction, the wood will be harder, and the color will become heavier and heavier, which will become: red, crimson, purple-red (black).