If the mirror has been placed for a long time, there are dirty spots on it, how can it be washed off

If the mirror has been left for a long time, there are dirty spots on it, and the following methods can be used to wash it off:

1. Wipe with a sponge dipped in glass cleaning agent.

2. Mix the water with a ratio of 1:5 or 1:10 to clean the toilet and spray it. Then wipe it.

3. Wipe with a cloth dipped in vinegar.

Mix toilet soap with water in a ratio of 1:5 or 1:10, then spray it on to wipe clean (wear gloves).

It is also okay to wash with vinegar.

Hope, thank you!

If you're sure it's a mirror surface, buy a glass cleaner sponge that can be easily washed off.

Mirrors on the market usually come in three different back plating: mercury, sterling silver, and copper. The common mirror appears spotted after a period of time of mirror gluing, which should be the user's use of acid glass glue, and acid glass glue usually reacts with the above materials, causing the mirror to see spots.

Therefore, we emphasize that neutral glue should be used, and neutral glue is divided into alcohol type and ketone oxime type. If the copper bottom mirror is made of ketoxime neutral glue, the ketone oxime will be slightly corroded to the copper material, and the mirror will see that there are traces of corrosion at the back of the glue after a period of construction, and this phenomenon will not occur if the alcohol neutral glue is used instead. All of the above are due to the improper selection of materials due to the diversity of substrates.

Therefore, it is recommended that users should do a compatibility test to see if the glue is compatible with the material before using it. Choosing the right glass glue product can avoid unnecessary losses.

Wash it with glass water, it's good, it's clean.

If the black dots can't be wiped off, the coating behind the glass is oxidized. It needs to be replaced.

There are black spots on the mirror in the bathroom for a long time, scrub it with a rag dipped in laundry detergent or dish soap to see if it can go down, if it can't go down, the reflective coating on the back of the mirror has fallen off for a long time, and the black spots formed can not be removed.

If the black dot is not obvious, you can only continue to use it, and if it is too obvious, you can only change it. Many people have asked me questions about the landlord in person.

When you look in the mirror, you inadvertently see black spots and your hands can't touch them, right? In fact, the coating paint protective layer on the back is aging, and the mirror is generally made of aluminum and copper, which has poor adhesion, so it is brushed with paint for protection.

It's been a mirror for a long time, and the black spots on it can be dipped in a detergent rod scale with a harder rag.

There are black spots because the paint on the back side of the mirror has fallen off, and it is either replaced with a new one or repainted at the back.

Pour a spoon of small soda powder into a bowl, add two teaspoons of white vinegar, add water to a small half bowl, and stir well. Wipe with a towel dipped in this water. Until clean. You can try.

If there are dark spots on the mirror, if it is due to later printing and dyeing, you can directly use a corpse cloth dipped in cleaning agent to wipe it, if it is a dark spot caused by oxidation or wear on the back of the mirror, you may need to replace the mirror with a new mirror or re-brush the back of the mirror.

If the dark spot on the mirror is floating on the surface, you can scrape it off with your fingernails, or rub a little toothpaste on the dark spot and wipe it vigorously with a rag to wipe it off. If it is formed by the oxidation of the metal film behind the mirror, it cannot be removed.

I can't clear it, so please buy a new one.

Kitchen with the magic rub of the washing pot.

You can use a soft cloth dipped in vinegar or toothpaste to wipe it repeatedly to remove water streaks and make the mirror as bright as new.

Practice is the only criterion for testing the truth, so immediately go and brush with toothpaste and brushes. Hurry up.

Dish soap can be used to scrub!

It's not easy to do on the launch surface.

The front didn't say it.

There are several ways to do this:

1. Pour a little vinegar and brush the mirror with a waste toothbrush or cloth dipped in vinegar to ensure that the mirror is as bright as new. Because the water stains on the mirror are alkaline stains, acetic acid can neutralize them. A little vinegar will wipe a large piece of the mirror clean.

Another easy way to scrub with toothpaste. The mirror is clean and bright.

2. Buy a sponge wipe, which is generally available in supermarkets, one side is rubbing, and the other side is soft, so it can absorb water and remove dirt, and the most important thing is that there will be no fiber residue or confetti residue like a rag.

Life tip: Teach you to remove water stains from the bathroom mirror, spray it, wipe it off.

It is difficult to remove water stains on the bathroom mirror, so teach you 1 trick to easily remove stains and prevent stains.

Wipe it with dry toilet paper and it will be clean!

It is more convenient to clean at home, mop the floor and clean the windows, but the hygiene of the kitchen and bathroom is quite difficult. Here are a few simple tips to keep your bathroom clean. The mirror in the bathroom is in a humid environment for a long time, so it will produce water mist and blur vision, and it is difficult to clean it with a dry or wet towel.

You can apply a layer of soap to the mirror first, and then wipe it dry with a dry rag to restore the clarity of the mirror. This method is also suitable for glass countertops, brackets and basins in the bathroom. If you don't want to see specks of pebro-black mold in the bathroom, the best thing to do is to spray the bathroom with diluted alcohol once a week; If you find that there are mold spots in the corners of the bathroom, you can also wipe them with a cotton ball dipped in an appropriate amount of alcohol.

The shower head will not come out well after a long period of use, usually because of the accumulation of scale, you can remove the showerhead, soak it in vinegar for two hours, and after taking it out, use a toothbrush to brush off the softened scale. Hard water deposits from the faucet can be eliminated by wiping them with lemon slices.