Can the Gundam prime set be fully painted?

If you color it, it's not called a vegetarian group, but whether you color it all depends on what you like. But in fact, hand painting is more technical, and the paint surface is relatively thick, it is difficult to achieve the desired effect. As for the seepage line, in fact, most people use enamel color infiltration It is Tamiya oily paint, and when your nitro paint is dry, it is best to spray protective paint Although it is no problem to spray or not, but it is also oily, there is always some slightly soluble it, as for Gundam, there is no need to soak It is enough to spray it with water and soil.

But you are hand-painted, so there is no need to worry too much about fading, because the paint is thicker.

There's so much to talk about upstairs! 1.Marker pen (the easiest and most convenient way to color, but it is recommended to buy a special coloring pen for Gundam.)

You can't paint too many areas with a marker, and you have to master the skills and can't make mistakes) 2Pen painting (that is, using a coloring pen dipped in paint to apply) To know the exact paint properties, use the corresponding dilution and the correct ratio. Don't shake your hands when applying, so that you can apply well.

The thickness of the pen is much thicker, so don't use an ordinary paint pen. Paint, with Gundam special, Junshi, Tianmiya, earth, you choose yourself) 3Spray paint (use the airbrush and pump, look at the online tutorial to choose the right airbrush and pump for you.)

Take care of them. The airbrush to spray up to pay attention to the distance and weather, not the first two can be used casually. Pay attention to the dilution ratio and paint.

There are several ways to do this.

1. The simplest, marker complementary color, all kinds of colors of gunpla special markers are available (of course, some colors may not be easy to find, such as metallic silver). Marker touch-up is relatively basic and easy to make, but it's not suitable for a wide range of paintings.

2. Buy spray guns, air pumps, and spraying, which requires a certain amount of time to learn and master skills. And some models may be scrapped in the process of fumbling, but it's worth it if you do master the painting skills in the end. The cost of spraying is relatively high, and exhaust gas will be generated in the process, try to ensure that the workbench you spray can install a ventilation fan close to the window, so as not to smell the exhaust gas.

In addition, there are also requirements for the humidity and other conditions of the working environment when spraying.

3. Hand coating, this is the same as spraying, you need to buy paint and adjust it yourself, but it saves the money of spray guns and air pumps. Hand painting is also more technical, but it is said that some people can do it as well as spraying.

See what effect you want.

The marker is also hooked and hooked.

If you don't polish the interface or anything, just hook the wire, but it's better not to get it.

I don't play with models myself. But classmates play,。。 About the painting of the armor seam seems to have a telescopic needle pen or something.。。。

To really make a high degree of completion, you need to paint with an airbrush, and the marker will not achieve the effect of an airbrush. Apply small parts with masking tape to cover the areas that are not painted, spray with an airbrush, and a marker should also work. If you paint a large area with a marker, the paint will be uneven, and you will say that the feeling is very thick and the color is not good.

Small places can be marked with a marker. In short, it is highly recommended that you use an airbrush.

Where the pen can't get in, either use a soaking or a fine brush, and the marker paint is squeezed out and stained.

Staining is inevitable, rub with a cotton swab dipped in solvent. The solvent can choose the gentleman's Tianna water, or Zhibao lighter oil, and the cotton swab is dipped in the solvent and rubbed gently, and it is easy to get it slowly. However, it is not possible to apply a large area with a coloring pen, because it is not uniform.

Teach you how to color with a marker. No need to spray paint to make the model shine on the eyes.

Most of the MG separations are already very close to the primary colors. However, some mg have a large color difference with the original, such as Jingbaofan.

Hooking is the most basic. You can use a wire pen to hook directly, but it will still be very thick, and you can erase the excess directly after hooking (it is recommended to use your hands). It is also possible to apply the seepage line, mix the diluent with lacquer or Zippo oil, hook with very fine gouache, and then wipe off the excess.

The advantage of seepage is that it will flow very fine and evenly.

Details such as spouts or catheters can be painted directly with a marker, and the effect will be better with pen mark liquid.

If you spray it, you have to use an airbrush and an air pump, which is more troublesome and toxic, so much so that I personally never make it myself. If you make it yourself, you must wear a mask or respiratory mask, and do not do it.

Make a primer with water first, and the larger the number, the smoother the water make-up. On the contrary, the small number will have a particle effect, the adhesion is greater, and it can be mixed, and it can be replenished with water after polishing. Then the color is spray painted, and the color needs to be tried again and again to be accurate, and it can also be covered layer by layer, of course, color common sense is required.

And then what matting brightness protects these, I'm not very sure.

After spraying and drying, then hook the sticker on the line, the sticker transfer is already very good, but the watermark with the water sticker softener is better.

In fact, it doesn't matter if it's hg, mg, or pg. It's all the same way. I've been sketching some stickers on the line.,The internal structure basically doesn't matter.,Because the covered place is too lazy to spend time to deal with.。

Of course, the water mouth still needs to be repaired. Therefore, I don't know if the painting is accurate or not, I hope it can help you.

The coloring method is the same.

Sanding - seamless - water and soil - color - bleeding - sticker - protective paint.