Feixun router FIR302M how to set up as the title Thank you

The steps of Feixun FIR302M router setup method are as follows:

1. First power on the router, then plug the external network incoming cable into the WAN port of the router, and then plug the network cable connected to the computer into a LAN port at will.

3. After connecting, you will see that you will enter the corresponding login user name: admin and password: admin.

4. Enter the operation interface and click the Setup Wizard.

5. Enter the interface of the setup wizard and select the Internet access mode setting.

6. Click Next to enter the Internet access mode settings, and you can see that there are three ways to access the Internet. If it's dialing, then use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

7. If you choose PPPoE dial-up Internet access, you need to fill in the Internet account and password.

8. Then click Next to enter the wireless settings, you can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in casually, and then the mode mostly uses 11BGNFor wireless security options, choose WPA-PSK WPA2-PSK, which is so safe that you won't let people hack and rub the network. Click Next to set it up successfully.

9. Click Done, the router will automatically restart, and the router setup will be completed.

Is the cable plugged in? First of all, connect the router line,Unplug the cat ADSL or optical fiber network cable from the computer network cable port,Plug it into the WAN port of the Feixun router,Find another network cable (usually you buy him and give it away) One end is plugged into the LAN port of the router,The other end is plugged into the network cable port of the computer,So that the line is connected。 The next thing is to set up the router, enter the Feixun router address:

Open your browser and press Enter. The initial username and password are admin. Once you have entered the router address.

Click on the quick guide on the left, select PPPoE according to your network environment, and enter the broadband username and password. Wireless encryption, SSID number: is the name of your wireless router can be changed freely, wireless password:

It's the wireless password for your wireless router. Click Save, and the old settings of the router are restarted. This router is quite smart.

It's also easy to set up since you can look at the 300 and 302 settings.

How to set up the mobile phone for the FIR302B router:

Home Network Environment Cabling]:

1. There is a telecom cat: the telecom cat --- router WAN port; The phone --- router wireless.

2. No telecom modem: network cable --- router WAN port; The phone --- router wireless.

The phone enters the router].

4. Pop up the router login interface and enter the default login username of the router: admin and password: admin (if it is incorrect, look at the back of the router).

5. The above methods do not work, in the reset router. The address, account number, and password are all on the back of the router.

Set Router Dialing]:

1. Enter the router.

Open the browser - enter the general router address is this or check the login information on the back of the router) enter the route - enter the user name, password, (the default is generally admin).

2. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the username and password for Internet access according to the prompts, and save.

3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

The specific setup method of the Phicomm FIR320 wireless router is as follows:

1. Connect the power supply of the router, and then plug one end of a network cable into the network port of the computer, and the other end into the LAN port of the router.

2. Open the browser of the computer, enter the IP of the router in the address bar, click the enter key to enter the settings page of the router, the user name is admin, the password is blank, click to log in, and enter the settings home page of the router.

3. After logging in to the homepage, select Manual Settings. Then select Manual Internet Settings, and Home Dial-up users select the PPPoE connection type. In the username and user, enter the username and password given by the ISP provider (Netcom, Great Wall, Telecom, Tietong, Cable, etc.) correctly.

The connection mode selection is always filled in with the mtu value of 1492. The save is done.

4. The wireless router also has a wireless encryption to ensure the user's wireless security. Select the wireless settings on the main page of the router's settings, select an encryption method in the security mode, any one of WEP, WPA, or WPA2, and then enter 8 or more Chinese characters or numbers as the wireless password in the security key, and the router settings will be completed after saving the settings.

5. After the setting is completed, the router will automatically restart, and the external network cable can be used by connecting the external network cable to the WAN port of the router.

Do you need to enter an account and password to access the Internet without a router, if you want to enter the Internet mode, please select pppoe, and then enter the account and password to try.

Mine can't be used either, so can you use it now.

If the landlord has an account number and password, choose PPPoE

Link the router cable, and then enter the router menu in (browser income** and then username admin password admin), select (setup wizard adsl virtual dialing (pppoe) press next Enter your telecom or Unicom account password and then enter your wifi password. The final operation is complete...