Can Q8200 overclocking kill AMD 810 in seconds?

First of all, your CPU may be a 5-capacitor version, which helps a lot with overclocking, and the motherboard is a first-line brand, ***, which also helps a little with overclocking. And the 3DMark06 score is high mainly depends on the graphics card, your graphics card is very good, it belongs to the medium to high level, which is also very important for playing 3D games, which is why you can not be stuck with full special effects. If there is a considerable gap between the CPU and the AMD Athlon640 quad-core, this can be reflected mainly in **compression, etc., you can try it yourself.

If both are overclocked, you can outperform him, but the normal usage of 8200 is no better than 810

Overclocking can be done via BIOS settings:

Turn on the computer, enter the BIOS, in the CPU options, there will generally be a position that supports overclocking, which is a set of numbers, for example, the default external frequency of the CPU is 200MHz, then 200 will be displayed in this position, and you can choose to change this external frequency at this position. If the external frequency is increased, the frequency of the CPU will increase, and the purpose of overclocking will be achieved.

It should be noted that when overclocking the external frequency, it should be exceeded little by little, for the first time, it can be adjusted to the external frequency of 205 first, and then restart after the upgrade to see if the system is normal, if it is normal, and then come back, adjust to 210, if it is normal and then adjusted, so that the external frequency is adjusted again and again, until the system can not start normally when adjusting to a certain number, then add voltage to it in parallel, and add it little by little, otherwise it may burn out. The first voltage to be added, restart to see if it can be restarted normally, if it can't be restarted, it is the overclocking limit.

CPU heat dissipation is also very important, if the heat dissipation is not good, not only is it super low, but it may also burn out the CPU. So be sure to have a fan with good effect, and if necessary, you can cool it with water to dissipate heat.

After the CPU exceeds the external frequency, the frequency of the memory will of course also follow. Therefore, many times overclocking is unsuccessful.

It is often not the problem of the CPU body, but the problem of memory. When overclocking, as long as the PCI-E is locked at 100, then the graphics card will not follow. If the PCI-E does not lock up when overclocking the CPU, it will cause the graphics card to burn out.

How much memory can be exceeded depends on the physique. A good physique can exceed 1500, and if the memory is a dual-channel double bar (not a suit), it is difficult to overclock. Unless it's a suit, or it's better to use a single channel of memory.