How can I adjust the configuration of the master the fastest? 5

Intel P4 FSB 800 with HT support. The motherboard 865P supports dual channels. A total of 1G memory, DDR400.

Graphics card GF5200, double 128. This configuration is okay, the processor is too high, and there is a little bit of waste.

You think the system is running slowly, I think you should think about it separately.

1. If it is said that the system is slow to start, you can consider whether the hardware driver is loaded at startup, whether the hardware working mode is correct, whether there are too many boot programs loaded, and whether the registry is too fat.

Second, if it feels too slow to run some games, which is directly related to the graphics card (your memory is enough), please check the evaluation of GF5200 on the Internet, its score when running some professional game test tools, you can judge it, and you have to check whether the graphics card driver is up-to-date, whether some functions of the graphics card are turned on in the graphics card settings, because some games rely on this aspect.

3. Consider your hardware, please check whether the dual-channel function of the memory is turned on, the CPU supports hyper-threading, check whether the HT is turned on in the BIOS and whether the settings are correct, and set the memory parameters: (CL-TRCD-TRP-TRAS-CMD RATE) to balance, generally speaking: 3-4-4-8-2.

Fourth, add the heat dissipation of the CPU, the core of Prescott, the workmanship is 90ns, the heat is too large, and you must pay attention to heat dissipation.

Fifth, it is best to install a radiator on the north bridge, the north bridge plays an important role in transmission, and the workload is too high, so it is also the object of consideration.

.Here are some of the places I have considered, please take a look at them, maybe it will help you a little! Please keep in mind that the speed of a computer is certain under certain hardware requirements and environment, and it cannot be imposed.

Let's see if there are too many startup items.

Update 2: Graphics card driver.

3. Whether the radiator in each part is overheated.

Fourth, the motherboard is slow to process data, so it is recommended to change the motherboard and take a look.

Turning off System Restore is a great way to do this, and the results are obvious.

The machine is very good.

The memory is definitely adequate.

You try to optimize it with Optimizer.

Main hard drive Samsung SP1604N

Graphics: NVIDIA GeForce FX 5200

These two won't work.

Hard disks and graphics cards are not very good.

There's no way to tune this, but if you're using the computer for high-performance work, the computer will get the most out of it.

If you want high performance, you can only change the computer or upgrade the configuration of the computer.

First of all, right-click "Computer", open the properties menu at the bottom, find "Advanced System Settings" on the left side of the window that opens, and click to open.

Open the system properties, click the advanced button above, and the advanced interface will be displayed.

Click Settings to provision the performance of the system.

Below you can see the performance configuration of the system, and you can customize the system settings according to your needs. It is also possible to choose the best look. But what we need is the best performance, so select the radio box for the best performance, click Apply, and then OK.

Installed win7 32-bit or 64-bit system, XP has stopped updating, is outdated, and is prone to viruses.

If you want to update the hardware, you can change the AM3 interface of the Athlon 640 processor** fragment 400, if the power supply is rated at 350 watts or higher, you can consider the Acelong 955 processor** fragment 450 or so, Athlon 641 651 and so on are FM1 interfaces, Athlon 740 760 and so on are FM2 interfaces, which are not compatible with your AM3 interface 880 model motherboard.

Right-click the C drive or other inventory properties and click the tool to defragment the disk.

With 360 and other security guards to optimize and accelerate, only the recommended ones are left in the startup item, and the others are all off, and the garbage is often cleaned up by one-click physical examination.

When installing the software, it is best to choose another disk when selecting the installation path, if it is installed in the C disk system disk, the system speed may be slow, so the software should be installed in other disks.

Use the driver wizard and other software to update the latest driver, just make sure all the way, and the new driver can give full play to the performance of accessories.

Clean the inside of the chassis and the fan, replace the CPU thermal grease, and replug the ports.

The picture below is the 360 security guard and the driver elf and what, it is recommended to open all of them, and everything else is forbidden to start.

Click on the installation in some drivers with new version upgrades.,And then confirm all the way to the line.,The driver can be installed in the C disk.。

This is disk defragmentation.

Other software usages are similar.

First: 4G memory can consider the current 64-bit Win 7 system, which can effectively use the advantages of large memory!

Second: If there is no response after logging in to the system for half a day, if you are dialing up the Internet, it is recommended that you fill in a fixed IP at will to reduce the system delay caused by the remote server IP allocation. As shown below:

Third: Use xx guard to speed up the boot speed and optimize the boot project.

The most straightforward way to save money is to update your CPU

At present, Athlon II quad-core 760K 440 yuan.

After the replacement, it can last for another 2 years.

Sorry, I didn't think about the interface.

On 955

You can use the quad-core U, but you should pay attention to interface compatibility when purchasing.

If the response is slow, reinstall it.,Anyway, XP has officially hung up.。

Nothing can be turned on after booting, it's not a hardware problem! It's a matter of your dial-up networking! I've had it before!

It seems that the network card has not been loaded! It will take about 30 seconds for the local connection to pop up! Then you can turn on something else!

Generally speaking, this situation will only occur when dial-up Internet access! In fact, just add a router! Let the router dial up and the computer go directly to the Internet!

I guess yours is the same!

1. This configuration should not be slow to run XP, maybe there is something wrong with your hard disk, check it with HDTUNE.

2. Optimize the next 360 security guard, there may be too many boot startup items.

Replacing the 4-core CPU is the best choice, if it is difficult to change the CPU, try to replace the system, it is best not to use the original installation disk, find the latest in **, that is, the patches are basically played.

According to your configuration, the XP system will not get stuck!! If it's really going to be upgraded, it's recommended to upgrade the CPU!!