How to paste the mobile phone film for the second time will have no bubbles

I saw it on a tutorial called micolor mobile phone film before, which is generally of excellent quality, you only need to wipe the screen clean, and then throw it on, and the film will stick to itself. If you want to talk about the details,I'll give the steps of the film to the landlord.。。。

micolor film steps].

Step 1: Aim the marked side with the screen and tear off part of the release film, taking care to avoid touching the adsorption layer of the protective film with your fingers during the operation.

Description: The protective film is divided into two layers and three layers according to different functions, and the label is distinguished, one label is two layers, two labels are three layers, the middle is the use layer, and the outer two layers are release films.

Step 2: Align the adsorption layer at the corner of the screen, be sure to align the position, and carefully smooth it while removing the release film, because the protective film has an electrostatic automatic adsorption function, and there is generally no need for too much ironing in the process. When pasting the film, it is recommended to paste it from the side with more concave and convex surfaces of the screen, and paste it from point to line and from line to surface in turn.

Note: If there are tiny bubbles in the film process (not dusty), you can use a cloth to gently smooth and squeeze it, even if you don't pay attention to the tiny bubbles, it will not be a big problem, and the bubbles will disappear on their own in 3-5 days.

Step 3: After lamination, if there is a release film, remove it. Protective film disassembly; If it is necessary to remove the protective film, you can use scotch tape to attach to the corner of the screen protector. Lift it gently.

As long as the screen is wiped clean, find a room with less wind and dust, and put it down.

Press it with a knife and stick it as you go.

Yes. The hydrocondensate film will disappear automatically if there are more bubbles, because the material of the hydrocondensate film is TPU or PET, and the material has good ductility and retraction, so the bubbles will disappear automatically, but the hydrocondensate film is very thin and the protection ability is not as good as the tempered film.

Hydrogel film and tempered film are not the same kind, the material of hydrogel film is inorganic organic composite material, which has super ductility and retraction, so ordinary scratches will be slowly eliminated. The hydrogel film is made of four materials, which is smooth to the touch and has a Q elasticity if pressed. Because the PBA added to the material has strong adsorption and elasticity.

1. Hard card or bank card.

If the phone tempered film.

If there is a small amount of air bubbles on the edge, first pry the corner close to the bubble with a hard card or bank card, and the bubbles will disappear after full contact with the air. Then use the bank card to press the unopened tempered film and slowly press the tempered film before the forward file, so that the opened part can also be in contact with the mobile phone screen and glued together. Finally, gently scrape the phone screen with a bank card to make it look neat and comfortable.

2. A hair dryer.

The bubbles in the toughened film of the mobile phone not only affect the vision, but also greatly reduce the sense of experience. If there are bubbles in the toughened film of the mobile phone and there are a lot of bubbles, you can consider removing them with a hair dryer.

First, turn on the power of the hair dryer and turn on the hot air.

Blow against the phone screen, and turn off the hair dryer immediately after the screen softens.

Then press the bubbles in the tempered film with your fingers, and the bubbles will disappear after pressing for a while. Note that when using the hair dryer, be sure to control the action time to prevent hot air from damaging the screen.

3. Lubricating fluid.

Facing the recurring bubbles on the edge of the phone. The bubble disappears after pressing, but after a while the bubble resurfaces in its original place, at this time you can borrow a little lubricant to eliminate the recurring bubbles.

Start by dipping a toothpick into a little lubricant and then lift the corner close to the bubble so that the lubricant on the toothpick comes into direct contact with the bubble. When the lubricating fluid comes into contact with the bubbles, the stubborn bubbles disappear. This method is a bit cumbersome to operate, as it solves the bubbles while preventing the creation of new bubbles.

4. a clip. In the face of the bubbles in the tempered film, the simplest and roughest way is to use a clip to clamp the phone to temper the bubbles in the film. The next morning, you'll find that the bubbles are all gone.

In order to protect the mobile phone screen, now everyone is a mobile phone film, in order to save money, a lot of their own paste, but the hand remnants of their own stickers are not often crooked or have bubbles, so how to deal with the mobile phone film after there are bubbles?

1. Blow with a hair dryer: It is to use the heat of the hair dryer to soften the tempered film, blow the bubbles with hot air for a period of time, and then press and hold the bubbles for a period of time, repeatedly, so that the tempered film is easier to fit the mobile phone screen.

2. Use a clip: Find a clip with a relatively large clamping force, before going to bed at night, clamp the bubbles at the edge of the mobile phone screen, clip it overnight, and get up the next morning, surprised to find that the bubbles have disappeared!

3. Use lubricating liquid or liquid glue: use a small amount of liquid on a toothpick and other objects, gently open the edge bubbles, and force the liquid to flow slowly into the bubbles, so that the liquid fills the gap between the screen and the tempered film. Don't forget to press the bubble during this time, this method is very good, and it won't hurt your phone much.

But the technical content is a bit demanding.

The above is an introduction to the method of "how to deal with bubbles in the mobile phone film", if you paste the bubbles in the mobile phone film yourself, you can deal with it according to the above methods.

1. Clean up the dust and oil stains on your hands first, and wash them with hand sanitizer first.

2. Wipe the surface of the mobile phone with a glasses cloth or a soft cloth that does not shed a small amount of water, and clean up the dust and fingerprints on the surface.

3. Tear off one side of the protective film, then aim at the phone, align the top and left sides and paste the lower film.

4. When sticking the film, try to maintain a uniform speed, and please pull back less when bubbles appear to ensure that there are no bubbles on the surface of the film. Then use a wool felt scraper, or a padded scraper, to avoid scratching. Slowly press the film little by little on the surface of the phone, in this case, there will be few bubbles instantly.

5. After pasting, repair the bubbles in some areas. Wrap the credit card with a hard card, credit card, etc., with the soft cloth that just wiped the screen, and then slowly exert force to scrape the bubbles out of the edges.

6. If there are small dust particles on the surface, please uncover the area, glue the particles with adhesive tape, etc., and then paste the film well.

Use a screen wipe or a small, soft cloth to slowly push the bubbles to the sides and corners of the screen. Try to avoid enlarging the area where bubbles appear.

Use a slightly damp cloth and push it gently, and the bubbles will run away.

The easiest way to do this is to put it in your jeans. Let them rub it, and a day or two will be fine.

Use a slightly wet cloth to push it gently, so that the bubbles will run away, and if it really doesn't work, replace it with a new one.

The reason for putting the pocket, the average person using the mobile phone will be accustomed to using the left hand to put the mobile phone head down and back outward into the left pocket, so when the legs are moving, the pressure is basically in the left position of the mobile phone, and the upper right corner is often in a suspended state due to force, which can easily cause the film in the upper right corner of the mobile phone to enter the air and cause upturning!

There are two reasons for the formation of air bubbles, one is that they may have entered the air, and the other is that they are stained with dust.

If it's the first reason, just use the bank Li Ru card and bus card to push the bubble out of the edge, and if you can't push it out, it means that it is a dust problem. (Personally, I would wrap the card with glasses cloth and then push it, because it prevents the film from being scratched).

For the second reason, you can lift the protective film upwards, lift the trail to the place where the bubbles are generated, and use the adhesive to glue the protective film and screen at the location where the bubbles are generated (because it is difficult for us to see from the naked eye whether the dust is sticking to the screen or the protective film), absorb the dust and re-paste it, and at the same time, in order to avoid air, you can also borrow a bank card to push it until the paste is flat and there are no bubbles.