How to charge on the computer, how to charge the computer

Updated on technology 2024-02-09
12 answers
  1. Anonymous users2024-02-05

    The task ends with hardware that the computer recognizes.

  2. Anonymous users2024-02-04

    What do you mean? Is it a computer to charge a mobile phone, digital camera, ***, mp4, etc.? Just use the data cable to connect the digital product you want to charge to the computer. As long as your computer is turned on, you can use it while charging it.

  3. Anonymous users2024-02-03

    Open the main chassis to replace the battery.

  4. Anonymous users2024-02-02

    Just plug in the cable.

  5. Anonymous users2024-02-01

    It depends on why you are charging, if it is a mobile phone, you can charge it directly by plugging it into the computer with a data cable!

  6. Anonymous users2024-01-31

    Connect the device you need to charge to the computer with a data cable, and you can charge it when the computer is turned on, but this method will greatly damage the battery of the device you want to charge, and it is best not to use the computer to charge the number.

  7. Anonymous users2024-01-30

    Plug it into the socket to charge.

  8. Anonymous users2024-01-29

    Is it phone charging? Just connect your phone to your computer with a data cable.

  9. Anonymous users2024-01-28

    Laptop power loss wisdom brain.

    The charging method of the correct jujube is as follows:

    1. For the new notebook that you just bought, because the manufacturer has gone through the first charge during the test, the battery should have 3% power when you turn it on for the first time, at this time, do not use the external power supply immediately, but use up the remaining 3% power until it shuts down, and then charge it with the external power supply.

    2. Do not turn on the machine when charging, and the charging time must exceed 12 hours until it is fully charged. Unplug the power adapter when fully charged.

    Then recharge the battery once it is exhausted, repeating three times to activate the maximum potential of the battery.

    3. In daily use, the number of times the battery is used should be minimized, because the number of charging and discharging of the laptop battery is limited, and the battery life is reduced once every time it is charged, so if you use an external power supply, the battery should be removed.

    If you often plug and unplug the power supply multiple times a day, and the laptop has a battery, the damage to the battery is even greater, because each time an external power source is plugged in, the battery is charged once.

    4. Laptop batteries generally have a memory effect, and partial charging (less than 100%) will lead to battery cells.

    The best way to avoid the memory effect is to avoid the memory effect, otherwise the battery can easily lose its power supply capacity for a short time.

  10. Anonymous users2024-01-27

    Use an adapter that meets the specifications to connect and charge.

  11. Anonymous users2024-01-26

    Summary. Hello, glad to answer for you. Kiss, laptop charging; First of all, the notebooks all come with chargers.

    How to charge a laptop.

    Hello, glad to answer for you. Kiss, laptop charging; First of all, the notebooks all come with chargers.

    2.Connect the charger of the notebook to the circular jack of the notebook with a data cable, and connect the other end to the power socket to charge, the notebook will have a battery-like pattern in the taskbar when charging, and the mouse will show how much it is charged when it is placed on the battery pattern, and how many hours are left. When charging at 100%, the charger cable can be unplugged.

    Which is the charging port.

    Kiss, flat charging port.

  12. Anonymous users2024-01-25

    1. Appropriate useMany people think that when they have already used an external power supply, they can do without batteries. However, it is not right to use the battery for a long time, and the battery also needs to be activated regularly, and proper use is more accurate. Pay special attention every time you use the battery.

    The battery should be charged after it runs out of power. Try not to unplug when it is not fully charged, and after the battery is fully charged, the battery or power adapter should be used separately and not both.

    2. Use the matching power cordWhen you first buy a laptop, you will come with a matching charger. When the computer is out of power, connect the charger to the charging jack with a data cable, and connect the other end to a power socket to charge. When the laptop is charging, there will be a battery pattern in the taskbar, and placing the mouse on it will show a virtual number of hours left to charge*%.

    Charging can be stopped when charging is displayed.

    3. Unplug the power supply after it is fully chargedWhen the power supply is already full, there is no need for an external power supply to use the laptop. Because a laptop is used with a battery loaded, the battery is in a state of repeated charging at this time. Not only will the battery life be reduced, but the use of alternating current and the battery at the same time will also cause the machine to overheat, and other components will also cause damage.

Related questions
9 answers2024-02-09

1. Activate the new battery.

When a new laptop battery is first turned on, the battery itself should have more than 70 charges (this is also a common practice for manufacturers). If you open the laptop you bought for the first time and find that the battery is fully charged or more than 70% charged, it means that the manufacturer has done a factory test). At this time, you should fully charge the battery, the charging time must be more than 12 hours, and then set the battery to turn off when the battery is 5% power, and repeat it three times, so that the battery can be completely activated, which can effectively improve the service life of the battery. >>>More

10 answers2024-02-09

1. Yes. It's not called put. It's called copying the contents of the disk to the computer. >>>More

19 answers2024-02-09

A charger An electrolyte density meter A discharge fork Measure the density with density to see if it is in the road mark Or use a discharge fork to charge normally for about 8-10 hours, if it is a liquid battery, open the liquid charging bolt, and see the fierce bubbles inside and charge it. This one is not expensive.

8 answers2024-02-09

What age is it?

As for the "activation" of the mobile phone battery, many theories are: the first three charges must be more than 12 hours in order to activate the battery. This statement is misled by the previous nickel-metal hydride battery, the phone has been activated and aged before leaving the factory, and the user does not need to activate it when using it, nor do it need to charge for an ultra-long time of 12 hours. >>>More

4 answers2024-02-09

There are generally two reasons why the phone cannot be charged. >>>More