Hello everyone, how to distinguish the difference between the original factory and the auxiliary fac

In fact, the original parts and analogues of the car are not very clearly defined.

To give you an example of engine oil, some car owners and friends often maintain in the 4S shop may be to identify the oil used in the 4S shop, and feel that the oil used in the 4S shop is the original engine oil, because the oil barrel is marked with the logo of their own car.

However, everyone ignores that car manufacturers do not have the ability to make their own engine oil, and engine oil is not simply produced, and most of the original engine oil used by automobile manufacturers is ordered by other big brand engine oil manufacturers.

Therefore, the so-called original engine oil is a special engine oil ordered by the manufacturer according to its own engine parameters.

Now the gap between the main factory and the auxiliary factory is getting smaller and smaller, and now it is best to use accessories from large manufacturers. The genuine one is not necessarily good.

Now there are fewer fakes, the first look** There is also a shop around! Logos, gloss, and quality are all clearly different!

Friends who drive should have encountered this situation, after driving for a long time, the car will inevitably break down. When everyone goes to the car repair shop to repair the car and replace the parts, the car repairer will ask whether to change the original parts or the accessories of the auxiliary factory. A lot of people just don't understand.

1, is to look at the appearance of accessories, 2It is a comparative weight, 3It's to look at the label.

All accessories are distinguished from the incoming channels mainly in these categories:

a) Original parts: mainly from the main engine factory and 4S store, there is packaging with brand factory logo, such as buying Mercedes-Benz headlights, this headlight is produced by Hella, but there is a Mercedes-Benz logo on both the lamp and the packaging of the lamp;

b) Genuine parts: mainly from manufacturers (such as Valeo, AC Deco, etc.), in fact, it is also a kind of analogue, with the manufacturer's packaging and logo (just because the manufacturer has not entered the equipment procurement list of the main engine factory for some reasons, so it cannot play the logo of the main engine factory), such as buying Mercedes-Benz headlights, which are produced by Hella, But both on the lamp and on the packaging of the lamp, there is only the logo of Hella and no Mercedes-Benz logo (occasionally there is a logo with Mercedes-Benz but it has been worn off), which is a good product with high quality and low price;

c) Offline parts: mainly from 4S stores, generally the original parts in very new condition, but without packaging, and there may be functional defects in some aspects, and it is difficult to distinguish from pure disassembly parts;

d) Brand parts Analogues Taiwan parts: There are many names, but they are actually analogues, mainly from a variety of large and small manufacturers, the quality is uneven, and there may be a huge difference, some manufacturers may be the suppliers of the main engine factory before, but for some reasons are currently excluded from the procurement list. Some manufacturers may produce three-no products (which can be understood as fakes), and the quality is completely unguaranteed;

e) Pure dismantling parts: mainly from the modification market, accident car dismantling market. For example, after the owner buys a new car (or only drives a short distance) and changes to 4 larger and more beautiful wheel tires, then the replacement of 4 sets of goods to the auto parts market will become pure dismantling, and some of the pure dismantling parts whose condition is almost close to brand new can be bought cheaply as original parts (but not packaged);

f) Vehicle dismantling parts: mainly from the accident car dismantling market. For example, the owner of the car hit the tree, due to serious damage to the vehicle engine and serious damage to the appearance of the vehicle, resulting in the scrapping of the vehicle, and then through the insurance company, the auction company, the accident car buyer, the process of vehicle dismantling into the accessories market, the color and quality of the accessories are very different, part of the accessories can be close to the color and quality of the pure disassembly, and the other part of the accessories merchants spend very little cost to find a small workshop to repair and refurbish, and then **, there may be major safety hazards and failure rates.

What is the difference between original auto parts and analogues? Make it clear! Buy accessories to repair the car and don't be afraid of pits!

Original parts refer to those parts produced by automobile manufacturers themselves or authorized to be produced by professional parts manufacturers. Generally speaking, they have been certified by the main engine factory, and the manufacturer logo is available.

The difference between the original and the analogues of auto parts can be distinguished by the appearance of the parts.

The packaging of the original parts will generally make the vehicle brand manufacturer logo have been certified, which is the easiest way to identify.

The manufacturer's mark has been certified, and the difference can always be found in comparison.

You can take a closer look at the original parts, and when you look at them in comparison, you can always find the difference.

Generally, the vehicle brand manufacturer's mark has been certified, if not, you can find a professional.

It is very difficult for us to distinguish this, and it usually takes a professional person to distinguish it.

First you have to look at the label, and then see if the appearance of the accessories is original.

Generally, the vehicle brand manufacturer's mark has been certified.

He has a label in it, and you can take out the label and look at it, or he can look at how new he is from a small detail of him.

First of all, you can find a professional to observe, and secondly, you can also look at their labels and quality.

It was he who looked at his newness from a small detail of him.

The original parts of the car and the ancillary parts, their difference is relatively large, the original parts are the parts that the car is equipped with when it leaves the factory, and the angulosite parts are the accessories produced by other small factories, and there is a big difference in their quality and quality.

In fact, there is no difference between ordinary goods and original goods, but the original goods have a slight advantage in **. In addition, there is another by-plant commodity. What is By-Factory Goods For example, we have a lighting manufacturer in Guangdong.

When we saw that the Toyota car was selling well, a lot of people crashed and needed to change their lights. We consider this car to be profitable. Then the manufacturer will buy back one of the lights, remove the lights and open the mold.

After this kind of lamp is produced, it is called an auxiliary factory accessory.

How to distinguish auto parts, genuine parts, brand parts, and analogues? To be honest, for many car owners, it is a complete blind spot. Because under the existing processing technology conditions, ordinary auto parts (mainly mechanical metal and plastic parts), many processing enterprises have the ability to produce, and they can be used normally.

It is nothing more than that there is no stable service life. Therefore, the identification of auto parts should be carried out mainly from three aspects: packaging, workmanship, and details!

Auto parts genuine parts and brand parts, as well as analogues, their difference is generally that the genuine parts are original parts, while brand parts are accessories produced by other big brands, and analogues are imitation parts.

Genuine parts: on behalf of the accessories produced by qualified manufacturers (not necessarily the channels of automobile OEMs), with the name of the manufacturer, product brand, production address, certificate, with the manufacturer's packaging and logo; Some are untrademarked.

Brand parts are also called by-plant parts: low, mainly from the villages and towns of large and small parts factories, refurbishment plants, the quality is uneven, ** is different.

Many friends often encounter such problems when repairing or maintaining cars, the choice of original parts and accessories, and what is the difference between them。Genuine parts are generally specified by the OEM's secondary parts vendors. To distinguish such parts from auxiliary parts, they are often marked by an OEM or OEM vendor.

Original spare parts naturally***. In general, there are no problems with appearance and performance, but the corresponding ** is relatively high. Branch factory parts are parts produced by big brands and small brands.

**Varied, the quality is naturally uneven. The manufacturer of the parts of the branch factory may have been the first supplier of the main engine factory, and was later eliminated by the main engine factory, or it may be a three-no brand, and the quality is not guaranteed at all.

Original authorized parts are parts with the brand logo of the car company, which are generally authorized by the OEM, and have a layer of official certification and after-sales service guarantee。The advantage of the original authorized parts is that the matching degree of various types of accessories is higher, which can ensure the high-quality performance of the whole vehicle and meet the manufacturer's standards. The original authorized accessories are generally not sold to the outside world, and can generally only be bought in 4S stores.

Compared with other accessories, its quality, workmanship, matching and after-sales are guaranteed. As a result, ** is one of the more expensive types of accessories. Unauthorized original parts.

Genuine unauthorized parts are called OEM parts. OEM parts refer to the first business that cooperates with car companies to produce the same standard parts for self-sale, and printed with the logo of the parts manufacturer. Although the original authorized parts do not have the logo of the car company, the performance is the same as the original authorized parts, and after-sales service is also the responsibility of the parts manufacturer.

Overall, the quality of OEM accessories is ***, and it is relatively cheap. However, it's worth noting that there may be some style matching issues.

Ancillary parts refer to the types of accessories that are not authorized by the car manufacturer and have different quality。This kind of accessories can generally be seen in ordinary repair shops, and its shortcomings are also obvious, that is, the fit is not high, and the original parts cannot be replaced like the original parts. Even some auxiliary plant components and equipment may cause corrosion and wear on the vehicle itself in the future, which greatly reduces the safety performance of the vehicle.

Generally speaking, it is difficult to guarantee the quality of the parts of the branch.

For car owners, if it is an accessory that affects the safety or driving quality of the car, it is necessary to use original parts, such as: brake pads, steering rods, brake discs of the braking system, etc.; Crankshafts, piston connecting rods, etc. for power systems。Some inconsequential accessories that do not affect driving safety and appearance quality can be selected from the factory, such as cabin air filters, front and rear bumpers, navigation, three-way catalytic cleaning of the vehicle and throttle cleaning of the vehicle.

However, car owners should also pay attention to their homework before choosing sub-factory accessories. Don't choose products from three or five brands, but choose products with better quality.

There are these differences between auto original parts and analogues, the original parts have official logos, official dates, and codes, and the analogues do not, and the quality of the analogues is not as good as the original parts, but the analogues are cheaper, much cheaper than the original parts, let me tell you, how to distinguish the original parts and the analogues, first look at the official label, then look at the quality, and then touch it with your hands, the texture of the original parts is better than the texture of the analogues, this is the way to distinguish.

There are these differences between OEM and ANE parts. The original parts have the official logo, official date, **, and the auxiliary parts do not. And the quality of factory auxiliary parts is not as good as the original parts, but the factory auxiliary parts are much cheaper than the original parts.

To be honest, I don't know what the difference is, and I don't know how to break it down, but I recommend that you look it up online, because I think the sugar on the Internet is very reliable.

The original parts are designated by the main engine factory as secondary parts suppliers, such accessories are generally marked with the brand logo of the main engine factory and the brand of the first company, generally like the headlights of the Volkswagen Passat are processed and manufactured by Philips.

** pieces are mainly from the first brand products, this kind of products also belong to the analogue, but the manufacturer is from the main engine factory designation, so the quality can still be guaranteed, is a high-quality and low-cost number choice, so the general replacement of this kind of accessories is the most cost-effective choice.

By-plant parts, this kind of accessories are generally accessories of various large and small brands, the quality is not guaranteed, uneven, some brands are more conscientious, some brands are quite unreliable, we are better to do homework online when choosing the deputy factory brand.

Dismantling car parts, this kind of accessories are mainly in the second-hand market or accident car dismantling market, such accessories have a large difference in color and quality, and they should be distinguished when purchasing.

The original factory generally refers to the accessories assembled by the automobile manufacturer, such as China National Heavy Duty Truck Commercial Vehicle, its engine, gearbox and a series of accessories for loading are supplied by supporting manufacturers or dealers, and the accessories of these supporting manufacturers or dealers are the original parts. If it does not produce parts of the model in other manufacturers and dealers, it can be considered as an auxiliary factory.

Answer: The area of the original shock absorber and the auxiliary factory may be different: 2 ** manufacturers of the same model, in order to ensure the output of the general car in the production of a b c three points, the shock absorber ** is different, and the procurement cost is not the same. Automobile manufacturers not only supply to the main engine factory, but also supply to the spare parts company of the main engine factory, so the first supplier at point A is the original factory, and the first supplier at point B and point C is the goods supplied by the first supplier of the auxiliary factory, but in fact, the performance is basically the same, because it can only be supplied after OTS approval and DVP test, so there will be no big difference.

One: Affirm that the original factory is higher than the deputy factory Second: the original factory has a long service life.

Three: the original factory has a good use effect and a good sense of comfort.

Ask how to tell the difference.

Generally, it will be marked on the nameplate.

Or the tracking number is distinguishable.

Ask how to check the number.

Or scan the code above.

It will generally tell you if it is the original factory.

Because it will be different.

Question: And I saw that the shock absorption of the weld joint is not the same as that of the original car.

Question: The weld joint is uneven.

The shock-absorbing weld of the original car is smooth.

Didn't you ask in the first place?