The Xiaomi Mi 9SE screen is out of order intermittently

It may be that you have water stains on your fingers, try to dry the water stains on your hands and on the screen before using them; It is possible that the phone is charging, but the screen fails due to voltage instability, so stop charging and use it again. If you rule out the above two situations, there may be a problem with the screen adjustment, you can enter [**] on the dial interface to re-test the touch screen. If it still can't be solved, it is recommended to go to the after-sales service to check and replace the screen.

The details are as follows:

1. The screen failure of Xiaomi Mi 9se may be due to water stains on your fingers or a lot of sweat (after playing ball, just after exercising, etc.), if there is, please wipe your hands and the phone screen clean before trying to operate;

2. The screen failure of Xiaomi Mi 9se may be due to the connection to the charger or power supply, if this problem occurs when the power supply is connected, it is usually due to unstable voltage or not using the original charging adapter.

As a result, it is recommended that you try to use Xiaomi's original data cable and charger when charging, and choose an environment with a relatively stable voltage for charging;

3. In this case, you can enter [* *] on the dial interface and select the touch screen to test;

4. If you can't solve this problem by yourself, it is recommended to find after-sales service for inspection and maintenance.

If the Xiaomi Mi 9 SE screen is its indirect failure, it is due to its system or internal failure, which causes the phenomenon, and you will come back to the sale later to solve it.

Hello landlord for this kind of intermittent failure problem, it is recommended that you restart your mobile phone, rule out the system problem, if it still doesn't work. Then you can only go to the after-sales service to test the screen.

If the touch screen of your mobile phone does not respond to a certain click, the screen occasionally jumps, or the touch screen fails, it is recommended that you:

1.whether there is any man-made damage to the phone's screen (such as cracks or water ingress);

2.whether to use a non-original film; Whether to use a non-original adapter and use it while charging;

3.Dial interface input * * to enter the hardware detection mode, click "touch screen test", slide your finger on the screen, test the touch screen, see if the sliding line is broken, whether there are unnecessary lines in the non-sliding area;

4.Virtual keystrokes can be asked in the dial interface by entering ** into the hardware detection mode "Keystroke Test"."menu"/"back"It is a virtual button, and the test is whether the button can be successful;

5.If the test fails or fails to calibrate in hardware detection mode, we recommend that you update to the latest MIUI version or factory reset.

6.If none of the above methods are effective, it is recommended to conduct after-sales testing.

The reasons why the screen of Xiaomi mobile phones fail to copy the screen are usually as follows:

The mobile phone is used for too long, the background running system and the mobile phone are more garbage, the whole system responds seriously and slowly, and the system response is not timely in the case of screen operation, resulting in Caton failure.

There are a small amount of water stains or magazines on the mobile phone screen or mobile phone, which affects the screen recognition process and causes the screen to fail and do not move.

After the mobile phone was accidentally dropped to the ground and collided with an external force, the touch screen or internal display cable of the mobile phone was disconnected (poor contact), resulting in the screen being unable to touch and failing.

Ways to fix screen failure:

Use the mobile phone cleaning software to clean up the uncommon software and garbage on the mobile phone, and restart the mobile phone after the system update; Or back up important information, restore the phone to factory settings, restore the phone to a better state, and see if there is any relevant reaction.

After wiping the phone screen and fingers clean, restart the phone to see the reaction.

In the case of accidental damage to the screen and being out of order for a long time, go to the relevant repair shop for fault detection, pay to replace a screen or disassemble the machine for internal cable reinforcement to see if the response is restored.

It is recommended that you restart your phone or update the system first. The following is how to troubleshoot the malfunction of the touch screen of Xiaomi mobile phones: 1. Whether there is a connected charger or power supply, if this problem occurs when connecting to the power supply, it is usually caused by unstable voltage or not using the original charging adapter, it is recommended that you try to use the original Xiaomi data cable and charger when charging, and choose an environment with a relatively stable voltage for charging; 2. Whether there are water stains or sweat on your fingers (after playing ball, just after exercising, etc.), if so, please wipe your hands before trying to operate; 3. Enter the hardware detection mode (**) Click "Touch Screen Test", and the lines crossed during the test should be complete, and there will be no intermittent or unresponsive operation; 4. If the above methods cannot solve the problem, please move to an authorized maintenance center for testing.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

This may be a broken screen, or a faulty motherboard system, it is recommended that you go to a repair point to repair it!

It is possible that the motherboard is damaged, it is recommended to go to a repair point to take a look.

2. You can also click the button back to the home page to return to the phone screen. Open another software to run, and then click Close; At this time, if you enter the ongoing software, the screen will disappear naturally.

3. Or use another mobile phone or fix** to your own mobile phone**, and then the jump screen of Xiaomi mobile phone will naturally disappear.

4. In addition, you can also clear the data in your mobile phone.

The way to clear the data,Turn off the Xiaomi phone first,Then turn it on,Just turn it on,Press and hold the up button of the volume button,And the power button,Press and hold for a long time。 After a while, it enters the state of data erasure, and at this time, you can choose to erase all the data. Of course, some of the data is still useful.

Therefore, before clearing the data, you can back up some of the data you need by yourself, and then clear the data.

The screen of the Xiaomi mobile phone is out of order, which is caused by the failure of the Xiaomi mobile phone system, you can try the following methods to solve the problem of the mobile phone touch screen failure: 1. Shut down the Xiaomi mobile phone and restart it to see if the mobile phone touch screen is back to normal. 2. Restore the Xiaomi phone to factory settings, after the phone is restored to factory settings, all the data stored in the phone will be erased, please make a data backup to avoid the loss of important data.

The specific process of factory reset of Xiaomi mobile phone is as follows: 1. Take Xiaomi mobile phone 6 as an example, unlock the desktop of the mobile phone, find the "Settings" option on the screen, and click to open. 2. Find the "More Settings" option and click to open.

3. Find the "Backup & Reset" option and click to open it. 4. Find the "Reset All Settings" option and tap to open to restore factory phone settings. 3. If the above methods can solve the problems of the mobile phone, you can bring the warranty card, invoice, etc. to the local Xiaomi after-sales service center for testing and processing.

My Xiaomi mobile phone has just been bought for a year and two months, and after the warranty period of two months, there is a frequency phenomenon, and now the mobile phone can't go directly. It's suspicious that it broke just two months after the warranty period. Is Xiaomi trying to make people change their phones frequently?

It's the same,It's always been a Xiaomi mobile phone,9SEInterly jumped the screen,Now I can't turn it on.,I'm so angry.。

If you encounter the automatic operation of the mobile phone screen, the screen jumps, etc., it is because most of the machines currently use capacitive screens, and the capacitive touch screen technology uses the current induction of the human body to work, which is easily affected by the environment, and the following factors may affect the use of capacitive screens:

1.Check if there are metal objects around, and try to stay away from them;

2.Whether you are using the phone in an environment with abnormal temperature, too high or too low temperature will affect capacitive touch;

3.Touching the screen with water droplets or moisture is easy to form a conductive layer on the screen and drift and jump the screen;

4.The voltage generated by the charger or socket is abnormal, and the capacitive screen will drift when the transmission voltage is unstable;

5.Static electricity can easily penetrate the capacitive screen of the mobile phone, resulting in problems such as abnormal touch recognition and screen jumping.

6.If none of the above inspections are feasible, after-sales testing can be carried out.

My mobile phone is also this problem, and the after-sales service does not give testing, so I record my screen and save the evidence, and then I will repair it.

The screen of Xiaomi mobile phones generally jumps more than your memory, and then you clear the memory, and then if it's not very good, you can format the phone.

Let's try to clean up the dust in the upper right corner of the mobile phone earpiece, I also inadvertently brushed it with dust when I was irritable, but I didn't expect this brush to be brushed!!

The same problem, the mobile phone I bought for my wife, I trusted Xiaomi so much at that time to recommend Xiaomi to friends everywhere, and it was the first time I was so disappointed in Xiaomi.

Me too, inexplicably jumping, bought seven or eight Xiaomi mobile phones, this is the first time I have encountered this situation, and I have the urge to drop the mobile phone.

Went to the after-sales service.,After-sales said it's a screen problem.,There were also users who reported that the screen was out of order.,To replace the screen.,But there's no goods for the time being.,So it can't be replaced.。。。

It turns out that the screen skipping is a common problem of this mobile phone,Less than two months after buying,The screen is uncontrollable and moves by itself,The first time I bought a Xiaomi mobile phone,Very disappointed,It's also the last time。

Mine too, but it's normal to take off the phone case.

My 9se also jumps the screen, I really want to smash it!

The phone restarts, and it doesn't work to go to the mobile phone store for repair.

Oh my God, I thought it was only me 9se like this, it turned out to be a common problem.

My Mi Jump screen is driving me crazy! After-sales garbage!

I also have this problem, the phone only bought a week. How to solve it?

Little millet junk goods can't be bought, whoever buys it regrets it.

What should I do if my Xiaomi 9se bought a year and two months and the screen skipping is uncontrollable.

My Xiaomi Mi 9se also jumped screen, I asked what's going on, he said to change the screen for more than 600 hundred.

Many users who have bought Xiaomi 9se mobile phones have reported that the mobile phone often jumps the screen, and inexplicably dials **, which greatly affects the user experience. So what should be done?

1. It may be a system problem, upgrade the system to the latest version and turn off the phone and restart it.

2. It may be a software conflict, back up the mobile phone data, restore the factory settings.

3. It may be that the inner screen or the motherboard and other hardware are faulty, you can go to Xiaomi after-sales disassembly for inspection and maintenance.

This article takes Xiaomi Mi 9se as an example.