Electrolux washing machine after washing clothes and the door won t open?

If you find that the washing machine can't open the door, it should be a vacuum inside. You can make a slight opening and expose the air.

If her washing machine won't open, which valve is missing? It is recommended to find someone to fix it.

What's going on with the washing machine not starting & how to fix it1. Analysis of the reasons why the washing machine does not startl. Whether the socket meets the requirements and whether the contact is good.

2. Whether the door is closed tightly, and whether the micro-delay switch is in good contact.

3. Poor contact of motor plug-in wire or bad motor.

4. Whether you have clicked the start button (the light has been lit after the start pause button is started), and there is a beep prompt.

5. Whether the faucet is turned on.

2. The washing machine does not start the release method1. Check the plug and socket of the power supply motor drum to make it in good contact.

When the power switch is pressed, the light on the display panel is not on.

a, bend the tan is not bright--- see if the power plug has electricity, change a plug-in board to try, if the power supply problem is ruled out, it is estimated that the washing machine control board has a problem, replace the main control board.

b. Press the start button --- to see if the water level indicator or the water injection deficit indicator is flashing.

c. Do not flash--- the electronic control board is broken and replaced; Flash, listen if there is no buzzing sound.

d. Audible --- 1Check the water pipes for water 2The filter screen at the solenoid valve is dirty.

e. Silent Message Judgment ---1Check whether there is power supply to the solenoid valve 2Check the computer board.

2. Check whether the micro-delay switch is good when powered on, if it is good, it is a contact problem, and the plug-in wire should be clamped.

3. Clamp the motor and plug in the wire or replace the motor.

4. Press the start pause button again.

5. Turn on the faucet and re-select the program to start.

Dear, hello, I am glad to answer for you that the door of the Electrolux drum washing machine cannot be openedAnswer: The door of the Electrolux drum washing machine cannot be opened because the voltage of the Electrolux drum washing machine is unstable, the details are as follows: first, unplug the power supply, wait two minutes to see if you can open the door, second, the first way can not be solved, that is, there is a problem with the structure, you need to pry it open with something, check whether the parts are flexible, or add lubricating oil, because it is a moving part, the rubber may be depressed after a long time of use, and the friction increases, Can't unlock the third, the computer version is faulty, there are also maintenance said that the motherboard is damp, fourth, through the second item can not be unlocked smoothly, it is recommended to change the lock, if the building initiative hand ability can be recommended or their own disassembly and repair, after all, the cost of changing the lock is relatively high, the first Pei Bu five, the after-sales **, I heard that Electrolux's after-sales service is not very good, take it as a last resort, sixth, the above 5 items can not be done, directly nearby electrical repair shop maintenance with tassel.