How to set up a wireless router to surf the Internet with the desktop

Enable the wireless network feature.

1. Buy a wireless router and plug the power DC port into the power supply of the router.

2. Then click the power switch on the router, turn it on, and you can turn it on if you don't have it, and then click the wifi in the lower right corner of several laptops.

3. Select the passwordless wifi, and then click the link, and you're good to go. Then it can be formed as a local area network at this time. No settings are required. Yes, I heard it right, no settings are required.

4. If you play a stand-alone game at this time, then you can also network.

The operation of setting up a LAN with a router for desktops and laptops is as follows:

1. Set the router (there is the default IP address of the router at the bottom of the router or in the manual, generally, the username and password are generally admin), enter in the browser address bar, hit enter, enter the login page and enter the user name and password, and successfully log in to the router;

2. Enable the router DHCP service;

3. Set the wireless network SSID number (wireless wifi name) on the router and set the password;

5. Set the IP address and DNS of the desktop and laptop to be obtained automatically (find the local connection in the network settings (double-click to open) --Properties-->Internet Protocol version 4 (double-click to open) --IP and DNS are changed to automatically obtain);

5. Set the network of desktop and laptop to [Home Network];

6. The LAN was successfully established.

No matter how you connect. Your network only needs to belong to the company's main router. And in the case of one network segment.

It can be interconnected to achieve the effect of forming a local area network. This is because whether it is wifi or wired, in the end their packets are redistributed through an aggregated router. So the medium of connecting to the network is different, as long as the packets are aggregated to a single router.

Then you can be connected. The main thing is that you need to set the IP addresses of the two machines in one network segment. Finally, the gateway also specifies the same router, so that the connection works better.

As long as it is connected to the Internet by the same route, it can be shared with the Internet, and the two machines can visit each other at the same time, provided that the computer is set up.

You've got the router. Then you have two options.

Wired Internet access: Connect the laptop to the router with a network cable, and set the network to the same desktop wireless Internet access: turn on the wireless function in the router, and set the broadcast number (SSID), security mode (password) IP acquisition method.

Then do the same settings in the wireless network settings of the notebook, and you can access the Internet wirelessly.

Whether this book can be wirelessly connected or not is not compatible with the desktop, have you not turned on the wireless switch of this book, or have you not set up the router correctly.

I'm in the same situation as you.

First the network cable - ADSL, then ADSL - routing, desktop - routing (pay attention to the interface) and finally set the desktop IP address, subnet mask, and default gateway. And set up a route (note the encryption) so that it's basically fine. All PCs that access the route have automatically formed a local area network.

Finally, do you need to confirm that your laptop is equipped with a wireless network card? If not, you can't use Wi-Fi.

It is simple, and I read the instruction manual.

The following references. 1. Set your IP to:

2. Log in to the router.

3. Follow the wizard to configure the dialing password.

4. If you need it, you can do IP and MAC filtering.

5. Restart the router and machine.

6. Restore your IP to the automatic acquisition method.

1. When setting up a laptop to connect to a router, you don't need to connect it to a desktop computer at the same time.

2. When the router is set up, laptops and desktop computers can connect to the network at any time. To log in to broadband, you need to enter your username and password for the first time to successfully share network information. Later, you can share the ability to surf the wireless network.

3. When the router is set up, laptops and desktop computers can automatically log in to the broadband network every time they reinstall the system. You do not need to enter a username and password.

There are two steps that need to be followed: Wireless Network Setup and ADSL (Extranet) Setup Wireless Network Settings:

1- Connect your laptop to your wireless router with a network cable (you can leave it unconnected to the Internet or ADSL).

2- Enter the router setting interface, the address is or, the username and password can be found in the manual3- Set the wireless network, change the SSD logo (optional), set the encryption method, it is recommended to use WPA or WPA2 mode to add the password.

Turn on the wireless routing function (some wireless routing is off by default, it must be turned on) 4- Turn on the DHCP function of the router, otherwise only one can be used Note: To change each setting, you need to save the settings once, in case the settings are lost ADSL or external network settings:

1- After setting up the wireless router, you can disconnect the network cable to use your laptop's wireless card to connect with the router.

2- Once connected, go to the WAN settings menu on the router settings screen3- Fill in your ADSL username and password and save it before restarting the router.

Once you have completed the above steps, you will be able to access the Internet freely on both wired and wireless networks.

No, if you are using it for the first time, you can directly connect the wireless router with a network cable and set it up.

Yes. The desktop is connected to the LAN port of the router with a network cable, and the "local connection" IP is set to be obtained automatically (it can also be set to a fixed IP in the same segment as the router, and the gateway is set to the router IP).

Laptops can be connected wired or wirelessly, and the wired connection is set up in the same way as a desktop; Simply enter the correct password for the wireless connection.

Yes, the general router has a network cable interface, no need to set it up, of course, the premise is that your router has been bound to an Internet account, so that two computers can share a network account to access the Internet. Otherwise, both computers will have to dial up to access the Internet.

The computer can be used by plugging in a wireless network card. Laptops come with their own wireless network cards.

When you buy a wireless router, you should pay attention, buy one with a network cable interface, don't buy a mini one, many mini models only provide wireless connection.

Yes, a wireless router can be connected to 4 computers with a network cable, and other devices can be connected wirelessly, not necessarily with a wired connection, even the current mobile phone can be connected to wireless Internet access. My home's wireless router uses a network cable to connect a notebook (because my laptop is broken, I can't practice wireless can only use a limited number of laptops to use wireless, and occasionally there are people who have mobile phones connected to wireless Internet access, all of which are OK.)

OK!!!

Generally, wireless routers have 4 LAN network cable interfaces, which can be connected to 4 computers with network cables, and multiple wireless devices can be connected to wifi at the same time, and the number is related to the model and performance of the router.

The installation is mainly the connection of the equipment.

The second step of the --- wireless router WAN --- wireless router LAN --- computer is to enter the IP address of the router on the computer, log in to the router's settings web page, select the Internet access method, and set the wireless channel, encryption, password and other information. Save.

If it's set up correctly, all devices will be able to access the Internet.

Have a nice day!