What should I do if the fog lamp enters the water on a rainy day

Hello, the fog lamp water ingress is mainly caused by poor sealing, this situation if the vehicle is within the warranty period can be replaced by a claim, if not within the warranty period, you need to buy a replacement yourself.

Hello, if the headlights get into the water, this should be caused by the poor sealing of the lampshade. You can go to the repair shop to reseal the lights.

Hello, this situation shows that the vehicle fog lamp seal is not tight, if the vehicle is still within the warranty period, you can go to the four S store, ask for free replacement of the new fog lamp assembly, if the vehicle has been out of the warranty period can only be replaced at your own expense.

It is because of the poor sealing of the headlights; Fix it yourself; 1. It can be slowly dried with temperature outside, but it will not be completely repaired; 2. Open the sealant, wipe it thoroughly, and then seal it; If it is a newly installed or newly purchased vehicle, it should be a problem with the quality of the workmanship; It is recommended to go to the dealer or maintenance department to solve the problem.

Hello car owner, the fog lamp water needs to replace the assembly, to avoid the water conduction inside the lamp, damage to the vehicle line, some fog lamps are behind the cover, you can also check whether the cover is not well sealed.

Hello, the fog lamp is flooded in the rain, indicating that the sealing of the fog lamp is not good, it is recommended to remove it and put the water out, and then check that the water is from the ** into the seal before installing it back. If the vehicle is within the warranty period, it is good to go to the 4S store to make a claim.

If the fog lamp of the vehicle causes water ingress in rainy days, it means that the sealing of the fog lamp is not tight, and it can be considered to check and seal the glue.

If the fog lamp enters the water, it should be that the fog lamp is not tightly sealed, and it is recommended that you go to the local professional repair shop to check whether the fog lamp needs to be replaced.

In this case, it is generally possible that the sealing effect of the lampshade is not good. You can go to the repair shop to do the sealing again.

Hello, this situation is generally caused by the poor sealing of fog lights. If it is within the warranty period, it is possible to claim free of charge.

During the warranty period, go to the after-sales service to solve this is a quality problem, and it is good to ask for a new fog lamp.

Hello, if the fog lights of the car are flooded on rainy days, it is recommended to replace them, which may be caused by poor sealing.

This is likely to be a problem with the sealing of fog lights, and it is recommended that you should go to a repair shop to redo the sealing treatment.

Prepare the tools, one Phillips screwdriver + one flathead screwdriver, mine is one.

Open the front cover of the engine and use a flathead screwdriver to the four nuts inside the red circle.

Don't mess around, you're skilled.

Using a Phillips screwdriver, remove the screws in the red circles of the front bumper on the left and right sides.

Use a slotted Phillips screwdriver to remove the screws and nuts on both sides of the left and right front bumper (under the front of the wheel).

Note: Because I didn't know how to warp before, I broke one side of the warping, and this warping method is the same.

After removing all the screws, you can remove the front bumper. Slowly open this position on the left and right, this should be slowly removed, see the picture below.

Hello, you can go to the repair shop or 4s to redo the lights and seal them.

The sun comes out and dries.

If the Zheng slippery fruit is slightly watered, you can let the headlights be turned on for a period of time, and use the heat generated to make the fog inside be discharged out of the lights through the ventilation pipe; If it is a serious water ingress, it is necessary to disassemble the lampshade in time, and disassemble the shouting filial piety, and then dry the water.

If it is a slight water ingress, you don't have to worry too much, let the lights be turned on for a period of time, and use the heat generated to make the fog inside exhaust the lights through the ventilation pipe, and the whole process will basically not cause any impact.

Of course, we also have a fool-proof method, using a hot air blower to blow at the camera for a few minutes to remove the moisture inside. However, it should be noted that it should be heated evenly when the air is hot, and never keep it in the same position all the time, otherwise it is likely to damage the headlight assembly.

Severe water ingress. If it is a serious ingress into the water, it has to be mentioned separately, and even goldfish can be raised inside, and the lampshade needs to be disassembled in time, and it will be disassembled, and then the water will be dried. Of course, we also have to check whether the headlights have cracks or leaking ground branches, and if so, they naturally need to be dealt with together.

As for how to deal with the water ingress of fog lights, in fact, it is similar to the aspects mentioned above, and Hu Duan needs to be divided into two situations: slight water ingress and serious water ingress.

But whether it is water in the headlights or fog lamps, if you really want to disassemble and assemble, we had better hand it over to professionals to deal with, after all, the process of disassembling and assembling the lampshade is not allowed to have a wrong sealing, otherwise it is likely to be flooded again.

The solution to the water ingress of the fog lamp is: 1. If the fog lamp is slightly watered, you can turn on the car lamp for a period of time, and use the hot air when it is turned on to make the fog inside the lamp discharge through the ventilation pipe; 2. If it is a case of strict preparation for returning to the water ingress, it is necessary to disassemble the lampshade in time, and then dry the water. It should be noted that the imitation of Lu Hunger is to check whether the headlights are cracked or leaking, and they need to be dealt with together when this happens.

After the headlights are turned on for a period of time, the fog will be discharged through the snorkel with the hot air, which will not harm the headlights. However, the headlights should never be baked, as it is easy to burn the headlights.

There are several ways to do this:

1. Wait for it to dry on its own. This method is the most convenient, but you can ignore it if the lampshade dries quickly, but don't ignore it if it doesn't dry for a long time.

2. Turn on the light and dry. Turn on the high beams directly for about 10 minutes, then turn off the headlights, wait for 60 minutes and then the fog will be eliminated naturally, the reason for this principle is that the heat emitted by the headlights melts the fog directly.

3. Remove the dust cover at the back and dry it with a water fan. This method looks very stupid in the past, but it is very practical, and most importantly, it is not troublesome, so if there is a water mist, you can try this method first.

No matter what kind of vehicle, the premise of turning on the fog lights is to turn on the lights of the vehicle, that is, to turn on the small lights of the vehicle first. Some vehicles turn on the front and rear fog lights by pressing the button, that is, there are buttons marked with fog lights near the dashboard, and after turning on the lights, press the front fog lights to light up the front fog lights; Press the rear fog lights to light up the fog lights behind the car. Some vehicles have fog lights installed on the light lever to turn on, which is turned on by rotation.

When driving in harsh weather conditions such as fog, snow and heavy rain, or in a smoky environment, front fog lights must be used to illuminate the road ahead and ensure driving safety. In recent years, in terms of styling, fog lamps have been installed on the front bumper.

Turn on the lampshade and put it in water, then dry it thoroughly, and finally close the cover, and seal the surrounding gaps with adhesive rubber, which is generally sold in shops that modify lights. Usually, if there is water, if the amount is very small, ignore it, the weather is hot or turn on the fog lights and it will slowly evaporate!

The sealing of the headlights is not good, and the repair method is made by yourself:

1. It can be slowly dried with temperature outside, but it will not be completely repaired;

2. Open the sealant, wipe it thoroughly, and then seal it;

If it is a newly installed or newly purchased vehicle, it should be a quality problem of the process, and it is recommended to go to the dealer or maintenance department to solve it.

There are several ways to bury it:

1. Wait for it to dry on its own. This method is the most convenient, but you can ignore it if the lampshade dries quickly, but don't ignore it if it doesn't dry for a long time.

2. Turn on the light and dry. Turn on the high beams directly for about 10 minutes, then turn off the headlights, wait for 60 minutes and then the fog will be eliminated naturally, the reason for this principle is that the heat emitted by the headlights melts the fog directly.

3. Remove the dust cover at the back and dry it with a water fan. This soil method looks very stupid in the past, but it is very practical, and the most important thing is that it is not troublesome, so if there is water mist, you can try this method first.

Causes of fogging caused by water ingress in front fog lamps:

1. Because a large amount of heat will be generated at the moment when the headlights are lit and even during the use of the headlights, in order to ensure the normal use of the thick royal lights, the car will exhaust the heat as much as possible through a ventilation rubber tube. However, moisture in the air can easily pass through this trachea, enter the headlights and attach to the lampshade, forming a fog;

2. In addition to weather changes, human factors will also cause fog in the headlights, such as vehicle wading, car washing, etc. When the vehicle wades in water, because the engine and exhaust system itself are relatively large heat sources, rainwater will form a large amount of water vapor on it, and along the ventilation pipe, part of the water vapor will enter the headlights;

3. Some car owners like to use a high-pressure water gun to flush the engine compartment when washing the car, and the water in the engine compartment is not treated in time after washing, and the water vapor can not be quickly dissipated to the outside of the car after the engine compartment is covered, and the water vapor stuffed in the engine compartment may enter the headlight.

In such a new era, it is very nice to have a car in every household. But at the same time that people are happy, there will also be a corresponding **, that is, car accidents gradually increase with the increase in car sales. Then the occurrence of a car accident is not only caused by the driver himself, but also the hardware of the car will also have a certain impact on the driver.

A common case with carsSo now let's talk about one of the most common situations, which is when people are driving cars, they encounter a lot of extreme weather. Sometimes when it snows or fogs, people choose to drive slowly and pull to the side of the road. Then when it rains, there will be fog in the headlights, and when this happens, people can't solve the problem even if they find it.

The solution to the problem is because they don't know how to solve such a problem, first of all, when facing such a problem, we need to consider why there is fog in the headlights? We should think of temperature differences, because fog only occurs when there is a difference in temperature between the inside and outside of the car. At this time, we should stop the car, or move the car to a sunny place to expose the fog from the headlights.

Or turn on the headlights and use the heat emitted from the headlights to speed up the dissipation of the fog, only in this way can we drive the car in a relatively safe driving environment.

Ensure the safety of the car and when we find this kind of problem, we must not go to the water gun to rinse, because this will cause a greater temperature difference, or even cause a greater water mist. Therefore, when facing car problems, we must be cautious, only in this way can we ensure our own safety. At the same time, this problem should also attract our attention, and we must not continue to drive when the headlights appear to be misty.

In this case, there is a high risk of accidents. We need to address everything and make the car relatively safe, so that we can be relatively safe.

I can add a waterproof film to the lights so that they don't have water mist in the lights, and when it's raining, be sure to travel slowly.

At this time, it is necessary to pull over in time, and be sure to clean up the water mist in the headlights in time, and it is necessary to turn on the fog lights, and you can also open the windows to ventilate, and there is to drive cautiously.

You can turn on the light and bake the water vapor in the lamp, so that the water mist in the headlights will be clean, and you can go to the 4S store to reinstall the headlights.