When the Y550 wireless network switch is on, it will turn on a blue screen, will it be a hardware pr

Ken can have nothing to do with wireless switches, but it has to do with hardware.

1. Restart the computer, when the list of available operating systems appears, press the F8 key, and on the Windows Advanced Options menu screen, select"The last correct configuration"and press Enter.

2. Restore the BIOS to factory default settings, and upgrade and flash the BIOS conditionally.

3. Remove the memory, graphics card, sound card, and network card, clean the slot, wipe the memory gold finger with a skin, and plug it in tightly.

4. Check whether the memory quality is problematic or incompatible, and replace the problematic memory.

5. Check and fix disk errors. My Computer—Right-click on the disk drive you want to install the system on (C)—Properties—Tools--Check and start checking—Tick "Automatically fix file system errors" and "Scan and try to recover bad sectors"—OK--Start--Restart-Show progress and restart after completion. Use the above methods to repair other partitions.

Or start -- run --- type chkdsk r (with a space in front of it) -- OK -- hit y-restart the computer in "Do you plan to check this volume on the next system reboot".

6. Defragment the disk. My Computer—Right-click on the drive you want to defragment the disk — Properties—Tools — Select the defragmented disk to open the Disk Defragmenter window — Analyze — Defragment — The system will start defragmenting, and you will be notified when it's done.

7. Remove the latest installed hardware and software, replace it with new hardware, and change the software to a new version.

9. Repair or reinstall the system.

Let's try it first to see how it works, the above method is more general and suitable for more situations.

Yes, my sony book is like that too. When starting the MIFI service in the service, it reports an error of 1607.

I know it, thank you.

It may be that there is a problem with the wireless driver, so update the driver.

The system plug-in is missing or the wireless network card driver is not compatible with the system plug-in.,My model is the same as you.,It used to be an update driver or something.,It's very troublesome and derives more problems.,So it's recommended to reinstall the system.。

The system is fine, the problem with the network card driver, the compatibility of the network card driver is not very good, backup and restore the previous network card driver.

This has nothing to do with configuration, it's a problem with your driver, check the system first.

fn+f5In the case that you are the original operating system, if it is your own reinstalled system, it is likely that the driver is not right, the shortcut keys are not available, and then there is to open the wireless connection attribute and enable the wireless network!

The laptop wireless network hardware switch is in the F-series key. The wireless network switch of mainstream notebooks is F2.

The steps to turn on the IBM notebook wireless network hardware switch are as follows:

1. Press the FN key on the keyboard, then press the F2 key to turn on the wireless network.

2. Open the Wi-Fi link page and connect to Wi-Fi.

Many laptops fail to connect to Wi-Fi because the user inadvertently turns off the Wi-Fi switch.

What exactly is the model?

IBM's wireless switches are typically located in front of the left palm rest, near the bottom, or on the right side.

There are obvious markings.

Just dial it and you're good to go.

Let's see if there's a configuration.,If there's this component, it's easy to find.,It's that logo.。

Double-click Network Neighbor --- Network Connection Status --- Wireless Connection--- Disable and then Enable.

There are two ways to turn on the Wi-Fi switch on your HP computer:

1. Through the wireless network switch that comes with the computer, it is generally on the side or side of the computer (as long as you find the corresponding icon, you can determine the position of the wireless switch).

2. Turn on the wireless network switch through the system settings.

1. Click [Start] and select [Control Panel];

2. In the [Control Panel] interface, select [Hardware and Sound];

3. In the [Windows Mobile Center] option of the [Hardware & Sound] interface, click [Adjust common mobile settings], and select to turn on (off) Wi-Fi in the pop-up window.

HP's notebook has a small switch on the chassis, the specific model position is different, it is a switch that can be toggled, and there will be a small light on the corresponding body to turn on or off.

What specific model is generally in the same area as the power button, and there are also at the forefront of the computer, and I ask weakly, what are you doing with him? Now there are new models that do not have a switch, and this function does not consume much power (in the case of not in use) If you feel that the icon is annoying, then just disable the wireless network card in the network connection.

Dear, it's a bit hard to judge. You can ask questions on Microsoft's official forums and submit the BSOD file. Experience.

Or go to the 360 forum and say that you have transferred the blue screen of the security guard and leave your QQ, and a staff member will contact you, and then follow his prompts to submit the documents.

When the blue screen is blue, there will be an error under the computer**, and a large string of characters such as error will be displayed, and it will be written down and then sent to solve for you.

Update the driver of the wireless card.