-
If the laptop does get into the water, there must be a first aid before sending it for repair:
1。Immediately unplug all possible power supplies. Including the battery of the notebook and the power ** device, as much as possible, the parts that can be removed can be removed.
For example, the light zone. Hard disk. memory, etc.
However, be careful to pour excess water out of your notebook. Wipe dry. Never while dismantling the parts.
Moisture is allowed to get into the various accessories of the notebook. Otherwise, the consequences are serious. This is what you have to do before sending your notebook in for repair.。。
Otherwise, your notebook is ready to be scrapped.
You're doing the right thing.
-
Disassemble, dry with a paper towel, it is best not to use a hair dryer, it is easy to deform, put it for a while and then install it, turn on the machine to see if there is a problem If it is within the warranty, please operate it professionally.
-
Will water get in at the bottom? Then you have drunk enough, there should be no problem, remove the battery, raise the laptop and find a fan to blow underneath, and go to the repair shop if you feel afraid.
-
Find your computer's repair department.
-
The laptop got into the water, and I don't think there are many failures like this. Water or moisture in the laptop will cause some functions to malfunction, and in severe cases, the laptop motherboard may be damaged. So what to do after your laptop gets into water? Let me tell you.
General treatment steps for water ingress from laptops
1.Once the laptop gets into the water, you must immediately remove the power supply and battery of the laptop, and remove the external equipment.
2.Never turn it on before dealing with it, or it will cause more serious damage to the laptop.
3.Emptie as much water as possible from the laptop and send it to the service station for a trained professional engineer to handle it as soon as possible, so as to minimize the damage.
4.Find a soft, damp paper towel or soft cloth to gently wipe the stain away and try to avoid abrasion to the surface.
5.Use a hair dryer to dry the body and parts, please keep the hair dryer at a certain distance from the body to avoid damage to the components due to high temperature.
-
1. First of all, immediately turn off the power of the laptop system, and remove the power cord and battery at the same time.
2. Use a clean rag or tissue paper to wipe the liquid on the surface of the laptop keyboard and the machine.
3. Move the laptop near the sink and tilt the laptop 90 degrees to pour out the liquid remaining inside the computer system and keyboard.
4. Use a clean rag or tissue paper to wipe the liquid on the surface of the keyboard and the machine again.
5. Let the laptop stand for 24 hours to dry the liquid inside, and do not use a hot air dryer to dry the case to avoid overheating and deformation.
6. Reconnect the power of the laptop and try to turn it on, if it can turn on normally, please back up the important data in the computer first.
7. Regardless of whether the laptop can be used normally or not, it is recommended to contact the service center immediately after the test and arrange for inspection and maintenance, so as to avoid sudden failure caused by oxidation and rust.
-
Water gets into the laptop screen, leaving a large watermark that is difficult to remove.
The LCD screen is based on the liquid crystal material as the basic component, filling the liquid crystal material between the two parallel plates, and changing the arrangement of the internal molecules of the liquid crystal material through filial piety overvoltage, so as to achieve the purpose of shading and light transmission to display different shades and staggered images, and as long as the three-element color filter layer is added between the two plates, the color image can be displayed.
Cleaning method. When cleaning the LCD screen, do not wipe the surface of the screen with any alkaline solution or chemical solution. The smudge of the LCD panel is roughly divided into two types, one is the dust in the air that accumulates over time, and the other is the fingerprints and oil stains left by the user inadvertently.
Many people have a misunderstanding when cleaning the LCD screen, and home appliance experts remind that if you don't pay attention, these details will damage the LCD to a certain extent.
1.Use a normal soft cloth or paper towel to wipe the LCD screen. Do not use a general soft cloth (such as glasses cloth) or paper towel to wipe the LCD screen, for the soft LCD screen, their surface is still too rough, it is easy to scratch the delicate LCD screen.
2.Clean the LCD screen with clean water. When cleaned with clean water, the liquid can easily drip into the inside of the LCD screen, which can cause a short circuit in the device circuit, which can burn out expensive electronic equipment.
3.Clean the LCD screen with alcohol and other chemical solvents. LCD screens are coated with a special coating on the screen, and once the display screen is wiped with alcohol, this special coating will be dissolved, which will have a negative effect on the display effect.
-
Do not turn on the laptop after it gets water, and put the computer upside down after the water flows out and then try to turn it on after two to three days.
-
1. Immediately cut off the power supply, dismantle the strong and crude lead and shut down the computer. Once the keyboard is flooded, immediately cut off the power supply, forcibly shut down, to prevent the possibility of short circuit, if the computer is still running on power, not only will it cause the keyboard keys to fail, but also burn the CPU and motherboard, 2, put the notebook upside down on the desktop for 5 minutes. Let the water that has entered the inside of the laptop flow back a little bit to stop penetrating the core of the machine, and then continue to dry the keyboard.
3. Carefully wipe the surface of the keyboard with a highly absorbent towel, wipe it clean in the subtle gaps, and ensure that there is no liquid left on the surface.
4. Give the computer a dry and ventilated space to dry or hair dryer dry.
5. The computer can be used normally, and if some of the keyboard keys fail, you can change the keyboard, if there is a problem with the whole machine, it is recommended to send it for repair immediately.
-
Nowadays, almost any office is inseparable from the computer, so many people with unstable schedules have bought laptops to carry with them, but when they go out, sometimes it is inevitable to encounter accidents, such as the situation that the laptop is flooded, so what should I do? Today, I will share with you the solution.
Windows operating system:
1. After the laptop enters the water, the first thing is to cut off the power, and the power off here is to unplug the power supply immediately and remove it together with the battery, so as to avoid a short circuit of the motherboard due to power-on.
2. Remove the accessories, because the notebook is a device that combines precision accessories, and if there is a problem in one place, it will implicate multiple parts. It is necessary to remove the accessories that can be moved on the notebook, such as external or replaceable module parts (such as optical drives, hard disks, floppy drives, expansion memory, etc.).
3. Pay attention to be careful when disassembling external or replaceable module parts to avoid unnecessary secondary damage.
4. Pour out the water, even if we disassemble the optical drive, hard disk, and memory of the notebook, there are still many in the notebook. In this case, tilt the laptop in its entirety, then allow the water to run out of the heat vents, pour as much light as possible, and send it to the service station to be handled by a trained professional engineer as soon as possible, so that the damage is minimized.
5. Find a soft wet paper towel or soft cloth to gently wipe off the stains, and wipe off the remaining water in the keyboard. And try to avoid abrasion of the surface. Never use a hair dryer to bake.
Because there are a lot of small plastic components in the internal accessories of the notebook, it is easy to deform the components, which can lead to worse consequences. If you are using a hair dryer, it is recommended to use a cold air to blow the water out.
6. If the laptop cannot be turned on in the power-on state after the laptop is blown dry, then it is likely that the internal circuit of the laptop has been damaged, and in this case, you can only go to the maintenance center to test.
Apple operating system:
Product name: Apple computer.
Product name: MacBook Pro 2019
System version: macOS
1. First of all, turn off the power as soon as possible, and then remove the built-in battery of the notebook to prevent internal short circuit and burn out the hardware.
2. If you are familiar with the disassembly of the computer, you can disassemble the hardware that can be disassembled, such as the notebook keyboard, hard disk, and memory.
3. Then check whether the water inside the notebook is serious, if there is obvious water ingress inside the notebook, you can use alcohol or absorbent paper to clean these up.
4. Check whether the keyboard is flooded, and if there is water, it also needs to be disassembled and cleaned up. Once you've cleaned up, don't rush to assemble. You can place the disassembled laptop in a relatively high temperature environment to evaporate the water vapor.
5. If the problem still exists and cannot be solved by yourself, it is recommended to bring your mobile phone to the regular Apple customer service center for inspection and repair.
-
If the laptop gets water, it should be turned off, power off, and water stains should be cleaned up.
1. Shut down. If you accidentally get water into your laptop, no matter what the reason is, remember to shut it down as soon as possible, because if you continue to power on, it is easy to cause a large area of short circuit in the hardware in the laptop, causing irreparable damage.
2. Power off. If the battery of the computer can be removed, then immediately remove the battery, as far as possible to completely disconnect the computer from the power supply, if the battery is integrated inside, then you can only do your best to obey the destiny of God, unplug the power first and then say it.
3. Clean up water stains.
After unplugging the power, immediately use dry towels, paper towels and other absorbent substances to wipe and clean up the water stains on the surface, clean them as much as possible to avoid water stains from seeping into the inside of the computer, after the cleaning is completed, and then pick up the laptop and shake it back and forth to shake out the water as much as possible, or you can use a hair dryer and other equipment to dry the water.
Laptop maintenance common sense:
1. Normal shutdown.
This point is the point that everyone is most likely to ignore, open a lot of background programs in the office, save trouble when shutting down, and force shutdown, which will affect the normal reading and writing of the hardware, resulting in information loss, and in serious cases, it will cause permanent damage to the hardware! It is also necessary to avoid sudden power failure, which will cause irreversible damage.
2. Maintenance of LCD screen.
The computer LCD screen is also very expensive, it is recommended to turn on the power-saving mode, the computer will automatically turn off the screen when not in use, which can not only save power, but also extend the life of the LCD screen. At the same time, you can use the LCD screen to hand paste the film to avoid scratches, for patients with obsessive-compulsive disorder, I don't know if I will change the screen directly when I see a little scratch, and at the same time, it is recommended to use a special cleaner for daily wiping and cleaning.
3. Avoid vibration when using.
The computer should try to work on a flat table or platform in daily use, and remember to handle it gently when moving, to avoid bumping, if it is easy to bump, the most serious consequence is to damage the hard disk, so try to be equipped with a special notebook bag, because the special notebook bag has been treated with shock absorption, which can effectively protect the hardware security.
The construction of a desktop keyboard is not the same as that of a laptop keyboard. The ultra-thin keyboard used in laptops has small key contacts that are coated with conductive glue that triggers an electrical pulse with each press. If the key contacts seep water, the conductive adhesive dissolves, and the keys will naturally fail. >>>More
Addendum: Sorry, I was wrong. -- Press F8 when you boot up, select "Safe Mode with Command Instruction", and then enter "C:" in the pop-up DOS window >>>More
It is recommended that you use a USB flash drive to repair the system, and then consider reinstalling the system. Let's take a look at the following methods: >>>More
A sudden power failure will damage the hard drive, so the files will be unreadable! The battery on the motherboard is to power the CMOS chip, it does not affect the hard disk, the battery on the motherboard can generally last three to five years, if your computer's time often slows down, you have to change the battery!
Hello, first of all, you need to confirm the activated mobile e-line WLAN service, then turn on the wireless function of the notebook, search for the CMCC hotspot signal, after the connection is successful, open the browser, and the page will jump to the login interface. Then enter your CMCC and password to connect. For your information, thank you for choosing China Mobile.