How much is the waste liquid treatment device, and the waste liquid treatment method

There are two kinds of waste liquid treatment: 1. Directly 3000 yuan tons (minimum) to the hazardous waste treatment company.

2. Give it to Yishengyuan for purification and regeneration. Reduce the output of waste liquid and reduce the discharge of hazardous waste.

Depending on the amount to be processed, you can decide how much it will cost, and you can consult with an environmental protection company. Waste liquid includes, cutting fluid, emulsion, release agent and other HW09 hazardous waste. Yili waste cutting fluid waste liquid treatment system.

Now the waste liquid is very polluted, the smell is not good, the environmental protection supervision is becoming stricter and stricter, and the environment is much better than before.

According to the level of economic development of each locality, the production and manufacturing costs are different, and the disposal costs of hazardous waste are also different. In economically backward places, about 2,000-3,000 yuan tons, such as Shanghai, Beijing and other places have developed economies, and environmental protection inspections are very strict, and the cost of hazardous waste disposal has reached 7,000 or 8,000 yuan, which has brought a very big burden to enterprises.

At present, there are companies engaged in the recycling of waste liquid, which can turn waste into treasure and achieve cost reduction and efficiency increase. Last month, at a customer in Kunshan, I saw that they were using cutting fluid purification treatment equipment, produced by a company called Luhong Technology in Hangzhou, which can purify and reuse the cutting fluid, saving a lot of waste liquid treatment costs, and the amount of cutting fluid has also been reduced, which can be said to save money at both ends, and the customer is very happy to use it.

There are three types of waste liquid treatment methods: physical treatment, chemical treatment and biological treatment. Chemical treatment is also generally combined with physical processes, also known as physicochemical treatment.

1.Physical treatment method refers to the use of physical or mechanical separation to treat waste liquid, and the commonly used methods are: filtration, sedimentation, floating, oil separation and centrifugal separation.

2.The chemical treatment method is a wastewater treatment method that separates, removes or converts pollutants in a dissolved and colloidal state in wastewater into harmless substances through chemical reactions and mass transfer.

3.Biological treatment is through the metabolic action of microorganisms.

This is a wastewater treatment method that converts organic pollutants in the state of solution, colloid, and micro-suspended organic pollutants into stable and harmless substances.

The ways to deal with it are:

1. Enterprises handle it by themselves. It is necessary to have a sewage discharge permit (with sewage discharge qualification), and secondly, the sewage treatment process is required.

The equipment must meet national or industry emission standards. Traditional sewage treatment processes are difficult to meet the standards.

2. Outsourcing. Outsourcing is handled by qualified environmental protection departments, which is costly (in some coastal areas.

The processing cost has been as high as 6,000 yuan to send more than Wang tons).

3. Waste liquid emission reduction and reuse technology. Anmei waste liquid emission reduction and reuse technology uses thermal cycle to evaporate and separate water from waste liquid, and the final purification of the purified liquid can reach more than that, and the cost is low.

Yuan per ton.

The cost of industrial sewage treatment is yuan per ton, and the first-class A standard of the "Comprehensive Sewage Discharge Standard" is implemented. The cost of treating industrial wastewater is affected by many factors such as the quality of the received effluent, the water treatment process, and the discharge standard.

The different pollutant components contained in the sewage will directly affect whether and how much carbon is added in the subsequent process, which will directly affect the cost of chemicals. In the case of a stable quality of incoming water, the operating power consumption of the sewage system is another important factor affecting the cost.

The different requirements of the effluent standard will affect the question of whether further treatment is required before the effluent is discharged, and will also affect the treatment cost, which is composed of equipment depreciation and labor costs.

Industrial Wastewater Classification:

Product processing objects by industry: metallurgy, papermaking, textile, Bozen printing and dyeing, etc.

According to the main pollutants in industrial wastewater, it is divided into: inorganic wastewater (electroplating nuclear violence, mineral processing), organic wastewater (food processing).

According to the main components of pollutants in wastewater: acidic, alkaline, phenol-containing, etc.

According to the degree of difficulty and harmfulness of treatment, it is divided into: wastewater that is easy to dispose of and has little harm, wastewater that is easy to biodegrade and has no obvious toxicity, and wastewater that is difficult to biodegrade and toxic. <>

The cost of industrial sewage treatment is one ton.

Industrial sewage treatment fee Ye Shitong with one ton of industrial sewage treatment costs of one ton, the implementation of the "comprehensive sewage discharge standard" class A standard. The cost of treating industrial wastewater is affected by many factors such as the quality of the received sewage, the water treatment process, and the discharge standard. The different polluting components contained in the sewage will directly affect whether to add raw carbon and how much to add in the subsequent process, which will directly affect the cost of chemicals.

In the case of basically stable water quality, the power consumption of the sewage system is another important factor affecting the cost. The different requirements of the effluent standard will affect the question of whether further treatment is required before the effluent is discharged, and will also affect the treatment cost.

Industrial Wastewater Treatment Equipment:

According to the different components of the wastewater, the sewage treatment process is different, and the commonly used equipment in the industry includes integrated sewage treatment equipment, chemical wastewater treatment equipment, buried sewage treatment equipment, evaporator, seawater desalination equipment, organic wastewater, landfill leachate treatment, etc. <>

Waste Disposal Principles:

The high-concentration waste acid and waste lye should be discharged when neutralized to neutral. For high concentrations of organic solvents containing a small amount of analytes and other reagents, they should be reused. The high-concentration waste liquid used for ** should be stored centrally in order to **; The low concentration is discharged after treatment, and the storage container and storage conditions should be determined according to the nature of the waste liquid, and different waste liquids are generally not allowed to be mixed, protected from light, away from heat sources, so as to avoid adverse chemical reactions.

Waste liquid storage containers must be labeled, indicating the type, storage time, etc.

Precautions for Laboratory Waste Disposal:

1).Try to ** the solvent and reuse it repeatedly without hindering the experiment.

2).In order to facilitate disposal, its collection classification is often divided into: a) flammable substances b) flame retardant substances c) aqueous waste liquid d) solid substances, etc.

3).Substances that are soluble in water are easily lost as aqueous solutions. Therefore, it is important to pay attention to it.

However, solvents such as methanol, ethanol and acetic acid can be easily decomposed by bacteria. Therefore, the dilute solution of this type of solvent can be discharged after diluting it with a large amount of water.

4).Waste liquid containing heavy metals, etc., decomposes its organic matter and treats it as inorganic waste liquid.

With the rapid development of the economy, people's living standards are also constantly improving, and at the same time there will be a large amount of sewage discharged every day, whether it is industrial sewage or daily domestic water needs to be treated by equipment before it can be discharged into the river, different sewage treatment equipment is different, the amount of sewage treated every day is different, ** will be different, let's learn about it todayWhat are the equipment that can treat sewage, and how much does a set cost?

Please click to enter**Description: Different industries for wastewater use.

Sewage is used in different industriesWastewater treatment processIndustrial sewage treatment equipment can be divided into food sewage equipment, coal chemical sewage equipment, heavy metal treatment equipment, DTRO system, evaporator, chemical wastewater treatment equipment, electronic semiconductor wastewater treatment, integrated domestic sewage treatment equipment, etc.

The size of the deviceIt is divided into 10t d, 15t d, 20t d, 50t d...1000t d, the price range with the specifications and models of the equipment are tens of thousands to hundreds of thousands.

Among them, the material of the equipment directly determines the equipmentService lifeThe general sewage treatment equipment materials are divided into carbon steel, glass fiber reinforced plastic, stainless steel three kinds, some parts of the rolling crack can be imported or not Gao Ying, the operating system has automatic and manual operating system.

To determine which treatment process to use for sewage, it is necessary to confirm from the water quality, and Hongsen Environmental Protection can formulate a professional water treatment plan according to the water quality of the company's sewage and the local sewage discharge standards.

Summary. Hello dear, <>

I am asking a question and answer, the main Ze 24, the charging standard for industrial wastewater The standard for sewage treatment is 1 yuan ton.

How much is a ton of industrial wastewater treatment.

Hello dear, <>

I am asking a question and answer, the main Ze 24, the charging standard for industrial wastewater The standard for sewage treatment is 1 yuan ton.

Pro-industrial sewage treatment cost yuan ton, hello, I will expand for you, industrial sewage treatment fee refers to the cost of wastewater treatment and discharge of industrial enterprises by the relevant sewage treatment company, the treatment cost mainly depends on the following factors. 1.The amount of effluent generated.

The amount of industrial sewage discharged is one of the main factors determining the cost of treatment, and the cost of each ton of sewage treatment can range from a few hundred yuan to several thousand yuan. Wastewater treatment companies typically base their efforts on the total amount of daily and monthly discharges, as well as multiple parameters such as water quality and quantity**. 2.

The degree of pollution of sewage is different for different sewage, and the cost of treatment is different for different degrees. Some sewage contains more organic matter concentrations, heavy metals, waste liquid, etc.; However, some factory wastewater is mainly sludge and other residues, which will have different impacts on the treatment cost of wastewater from the University of Technology. Hope mine can help you <>

Summary. Dear For your question, I will send you the chemical waste disposal table as the chemical waste treatment price list.

Dear For your question, I will send you the chemical waste disposal form to**Thank you. Do you know how much chemical waste is discharged in a day?

Pro: Because of China. There are a lot of chemical plants in the world, and one large chemical plant can discharge hundreds of tons, so I'm sorry I don't know