How does a wireless router work on an iPad ?? What does the detailed operation look like?

Your iPad is Lenovo's??? I really don't know about this...

Uh, first make sure that your wireless router can work normally (I am the wireless router of tp-link), write down your route network name and password (you can check it by entering the management interface, tp-link is entered in the router, the username and password are admin, I don't know, you can refer to the manual of the wireless router); Then it should be in your music pad settings to find the network settings or wireless network (I don't have a music pad,I have an ipad2 at hand,It's in the settings to find),Music pad should automatically retrieve your home wireless network,Select your home network,Enter the username and password,OK (I don't know what the specific name is,Look at the manual)

The iPad only has a WiFi port or a 3G port, so in order to connect to the router, you can only use a wireless router.

1. The IP address of the router LAN port is set to the subnet mask; (If yes, no need to change it) 2. Enable DHCP, set the gateway address and DNS address to be, and the address pool to;

3. Select PPPoE dial-up as the working mode of the router WAN port, and set the username and password of the broadband account;

4. Turn on the wireless function, set the SSID number (wireless network name), the wireless mode is recommended, the wireless security authentication and encryption mode is recommended to select WPA-PSK, and set the wireless access key.

The iPad needs to be set to automatically get IP and DNS.

In the pop-up window, fill in the login password of the router and click Login.

On the quick settings page of the router, select the ISP Internet access type, which is usually ADSL virtual dial-up, and click Next.

Fill in your Internet access and Internet password, which is commonly known as the Internet password, and click Next.

Open a new page, note that you must click the save button, otherwise you will not be able to connect to the Internet, because the router does not record the operation just now.

In the [System Tools] of the settings menu, select Restart the router, and click the button [Restart Router], generally if you don't restart the router, the router cannot be connected, so this step is still needed.

Reboot the router, wait for two minutes, open the iPad browser, and the network is successful.

1.Connect your router.

Connect the broadband cable of the front-end Internet to the WAN port of the router, and confirm that the indicator of the corresponding interface is always on or flashing.

2.Log in to the management interface.

When the phone is connected to the router's wireless signal, the router's login page will automatically pop up. If it doesn't automatically pop up, please open the mobile browser, clear the address bar and enter the management address of the router to the address on the back of the router), then the login page can be displayed, the login management interface, and the administrator password can be set.

3.Enter your broadband account number and password.

After logging in to the interface, please follow the wizard prompts to operate the router to automatically detect the Internet access mode and set the Internet access parameters.

4.Set a wireless name and password.

On the wireless setting page, you can change the wireless name and wireless password of the signal and set the wireless parameters.

5.Complete the setup and reconnect your phone to the wireless signal.

At this point, the router setup is complete.

This issue number is solved:

The owner's 710N should be connected to the front router for wireless AP, and after plugging in the front router, the IP address has changed.

The easiest way is to disconnect the cable between your router and the router in front of you, power off once, plug in the power supply, do not connect the network cable in front of you, in the case that your ipad or mobile phone can find this wifi, (the SSID default is TP link + 6 letters).

How to set up your Android phone:

Set pinning. Gateway DNSDNS2

Network prefix 24

iPad setting fixation method please ferry, I have not set.

Enter in the browser of your phone or iPad:

Username admin

Password admin

So you can enter the settings, the main point: wireless settings part WPA WPA2 SSID is recommended to default or set to alphabet letters + numbers (and the whole Chinese, advanced can not Martian), set an 8-digit wifi password.

I use 703N, and I have also set it up like this, I must set a fixed IP, and use an Android phone to enter 703N without any connection

The router address is or,Enter directly in the browser,The user name is admin,Some routers don't need a password,If you need a password, look at the router (on the label),Select security settings after entering,The network type is changed to encryption,iPad will prompt you to enter the password when you connect for the first time。

Ask; Router IP address? I haven't really seen this address, have you seen this address from? Is it on a connected computer, and if so, that's your router's network address, not your router's local address!

The route is connected to the cat, the route is connected to the computer, and it can only be adjusted when the route is connected to the computer, and the network cable acts as the data line between the computer and the router.

The iPad should not be able to be set up, it can only be set from the computer.

The admin you mentioned is the login username of the router, not the SSID of your home wireless network. So, you definitely won't receive a network called admin. TP-Link routers should have a tp-link SSID followed by a string of characters by default.

You look for it again. The above picture teaches you how to change the SSID

You can log in to the router with a desktop, then change the login password, admin is not secure, and then use the ipad to see the wireless network starting with tp-link.

The operation of connecting the iPad to the wireless network is as follows:

1.Click "Settings" on the main interface.

3.Once you have selected the WiFi network, enter the password to connect to the wireless network.

You log in to the wireless setup or something on your desktop and see what the SSID is. admin is only the username of the login router, not the SSID (wireless network name). The password or something can also be seen in the wireless settings.

I don't know if the landlord understands it.

Later, what password did your dad enter? I'm in the same situation as you.

Do you put the villa's password as the default password or? The password requires eight digits.

In the network settings of IPD, turn on the wireless, find your own way, and connect.

The router needs to be a wireless router, not a wired one. Turn on the wireless router, turn on the wifi (wireless network) on the iPad, find the name of your wireless router in the wireless name searched, and then join it. (If the wireless router sets a password, you need to enter the password).