Is Mobilgrease XHP222 a high speed lubrication?

The XHP222 is mainly used as a high-temperature grease, but it can also be used at high speeds. You can see some of its indicators on the Grease Technology Encyclopedia, or you can check the indicators on the official website.

If you need high-speed grease, you can come to us, a professional lubrication service company.

Due to its base oil viscosity of up to 220, it is not recommended for bearings or shaft rolls with too high speed, otherwise the internal heat is too high and the bearing can be damaged and wear will be accelerated.

Mobilgrease XHP 222 Series products are long-life lithium complex greases with excellent performance. It has excellent high-temperature performance and very high adhesion, structural stability and resistance to water contamination. These greases have a high dropping point and a maximum recommended application temperature of 140 degrees Celsius.

Mobilgrease XHP 222 Premium is an extreme pressure grease containing molybdenum disulfide that provides anti-wear protection under pivot rotation and other ring-breaking conditions. General purpose chassis grease for lubricants with a viscosity grade of NLGI 2. Mobilgrease XHP 222 is a grease made with the latest additive technology.

It is made with a high-quality lithium complex as a soap base, a polymer with high adhesion and a base oil with a viscosity grade of ISO VG220.

Flick industrial greases.

Generally, cars do not use grease.

Summary. Mobilgrease XHP222 is an NLGI2 advanced extreme pressure grease made from ISO viscosity grade 220 base oil, manufactured from a high quality lithium complex soap base combined with a very viscous polymer. The product does not soften in harsh operating environments and has excellent adhesion, maintaining a consistent hardness at operating temperatures ranging from -20 to 150.

Mobilgrease XHP222 is an NLGI2 premium Extreme Judgment Pressure Grease made from ISO Viscosity Digging Grade 220 base oil, which is made of high quality lithium complex soap combined with a very viscous polymer. The product does not soften in harsh operating environments and has excellent adhesion, maintaining a consistent hardness at operating temperatures ranging from -20 to 150.

This grease has excellent anti-throwing ability, sealing characteristics, excellent water pollution tolerance and high temperature oxidation resistance. The pumping equipment used in the oil change center is also disrupted and has good pumpability. It belongs to the high-speed run-up Yu orange slippery.

High temperature grease is a special grease, requiring high lubricity, high temperature resistance, durability and other properties, it is recommended to use synthetic base oil to produce grease, the oil film is uniform and stable, the durability is much better than mineral oil, the commonly used models are:

1) Shanghai Tiger Head Hotolube's fully synthetic high-temperature lipid and fully synthetic long-acting high-temperature lipid (2) Klube's TN 15;hgy 193

3) Dr. Bosh's HW223.

Many petroleum products are harmful to the human body, and if they are not cleaned in time, they may cause dermatitis and pimples in mild cases, and rashes or skin tumors in severe cases. Mistakenly inhaled into the mouth or inhaled into the body, mild gastrointestinal disease or pneumonia, severe may lead to cancer, so in the process of transportation and use, care should be taken not to get the oil on the food, do not get into the respiratory tract, and do not get full of oil or the ground is full of oil, which not only causes waste to the country, but also hinders personal hygiene.

Animal experiments have proved that refined mineral oil lubricants have low toxicity, but additives have increased hazards and must be protected. Even if the new oil is non-toxic, deterioration and contamination during use will increase its harmfulness, so be careful not to contaminate it**, especially not to inhale or eat it. If you accidentally get on your body, rinse it off with water immediately.

The replaced lubricating oil has deteriorated and can only be disposed of as waste oil, which should be properly disposed of to avoid pollution caused by hail.

1.These waste oils should be collected and disposed of in a unified manner, and barrels or bottles containing lubricating oil should not be littered and properly disposed of to prevent adverse effects on the environment.

2.It is difficult to recycle used lubricating oil, especially lubricating oil products with many additives, but it can generally be burned as fuel oil after simple treatment.

Mobilgrease XHP Series greases are state-of-the-art products designed by our formulation experts and are the result of the combined efforts of our global technical support staff. With state-of-the-art production facilities and proprietary production technology developed at our research facility, Mobilgrease XHP 220 Series products are characterized by excellent adhesion and agglomeration and a high dropping point. These products use specially selected additives for excellent oxidation stability, resistance to rust and corrosion, resistance to water contamination, and anti-wear and extreme pressure protection.

Mobilgrease XHP 220 Series products offer the following features and potential benefits:

Excellent resistance to water washout and spraying;

High adhesion and coaghesive structure;

Excellent resistance to rust and corrosion;

Very good resistance to high temperature heat, oxidation and structural deterioration resistance;

Very good anti-wear and extreme pressure (EP) properties;

Wide range of applications;

Reliable lubrication and equipment protection under the most severe water ingress conditions;

The toughness of the grease reduces leakage and extends the grease addition cycle, thus reducing equipment maintenance requirements;

Protection of lubricated parts in harsh water-containing environments, especially in acidic water environments;

Long service life and excellent bearing protection at high temperatures, reducing equipment maintenance and replacement parts costs;

Reliable lubrication of lubricated equipment under high sliding and shock loads, extending equipment life and reducing unplanned downtime;

It can rationalize the inventory work and reduce the inventory cost;