How did Warcraft get someone in the team who was about to run out of blood?

Updated on Game 2024-02-08
34 answers
  1. Anonymous users2024-02-05

    The first step is to select the team, assuming that it is the first pair, press "1" first

    Step 2: Hold shift to select the bloodless pawn.

    The third step is to re-form, but the general master will not re-form, after pulling it out and adding some blood, he will stand at the back of the team and then pull it up and continue walking

    i.e. team number + shift + left mouse button on bloodless pawn + ctrl + team number.

  2. Anonymous users2024-02-04

    Call the bloodless one back to his base first.

    Then re-assemble a team!

    It's to get rid of the original team that has no blood! Then press shift+1 or 2Either way!

    Form a team! That way the bloodless one won't be on your team!

  3. Anonymous users2024-02-03

    The correct way to do this is to pull the whole team back, then hold down the shift key and click with the left mouse button on the red-blooded pawn. And then pull forward from the new formation.

    However, if the hand speed is very slow, then only the spider flow effect is better.

    In addition, if you are still in the most elementary state of near and far mixing, it is better to learn something else first. For example, how to form.

  4. Anonymous users2024-02-02

    Line press the team where your Red Blood Soldier is, hold down Shift, and then click on the Red Blood Soldier, and then T out of the team temporarily, and to permanently kick out the team, you need to regroup immediately after T out of the Red Blood Soldier.

  5. Anonymous users2024-02-01

    Press shift, then left-click on the person you want to team up, remember to use Ctrl to form a line.

  6. Anonymous users2024-01-31

    Press shift, then left-click on the person you want to tat out of the team, then press control to regroup the team.

  7. Anonymous users2024-01-30

    Tap your squad first, then press shift to tap your bloodless pawn. Remember to form a line!!

  8. Anonymous users2024-01-29

    Press shift, then left-click on the person you want to tout of the team.

  9. Anonymous users2024-01-28

    Press Alt to find the red-blooded unit and pull it back, then select its team and press Shift to remove it.

  10. Anonymous users2024-01-27

    Tap your squad first, then press shift to tap your bloodless pawn.

  11. Anonymous users2024-01-26

    Press shift to point out the bloodless soldiers in the team.

  12. Anonymous users2024-01-25

    It seems that it can only be re-formed!

  13. Anonymous users2024-01-24

    Press shift and click on that unit at the same time.

  14. Anonymous users2024-01-23

    Right in the middle below the screen. Double-click the peasant and regroup.

  15. Anonymous users2024-01-22

    Press the shift point below the one you want t.

  16. Anonymous users2024-01-21

    For example: I use immortality, when you make a spider into team 1, you find that there is a bloodless in team 1, and you want to pull it home alone, and it is not in team 1, the fastest and best way is to double-click the bloodless spider first, click the base, then hold down the shift key, then click the bloodless spider, and then press ctrl+1 again, the old can be, say trouble, do it quickly, I wish you success in solving this problem!

  17. Anonymous users2024-01-20

    There's also an easier way, click on the pawn you want to t, and then click shift the team number of that pawn, so it's easier and more convenient because you may not have time to look at the team avatar when you are fighting

  18. Anonymous users2024-01-19

    Hold down Shift to kick it out.

    Regrouped.

  19. Anonymous users2024-01-18

    Press shift to shock the pawn to be raised, and then regroup.

  20. Anonymous users2024-01-17

    To use the shift key, select Team B, hold down Shift while left-clicking on unit A to remove unit A, and then, send Shift away, press Ctrl + number B to regroup.

    There is no way to directly t out of the formation)

  21. Anonymous users2024-01-16

    Select the team you want to T, hold down the shift left button and click A to remove the A unit, and then press Ctrl + number to form a team.

  22. Anonymous users2024-01-15

    Oh, I don't remember very well, select Team B, then hold down Shift, select the A you want to filter out (it's the character in the point game, not the avatar in the point team), then the A in the B team list is gone, and then regroup into Team B, and the A doesn't belong to any group.

    Since I haven't played for a long time, I don't know how to remember it, either hold shift or hold down ait, try it yourself.

    Have fun.

  23. Anonymous users2024-01-14

    Select Team B, hold down the Shift left click on A to remove Unit A, and then press Ctrl + number to form a formation.

  24. Anonymous users2024-01-13

    Hold down the shift key and mouse a single machine, one of the fat man's little avatars, he will be kicked out by you, but if you put him in formation, you press 1 team and there will still be him, if you want to t him out of team 1, you will press ctri+1 after t finish him, so that the rest of the pawn is 1 team, shift is not a formation, but a unit to join the team, ctrl is a formation, if you want to t t 8 fat people out of 1 team, 8 small g into it, do not need shift to circle 8 small g ctrl+1 All the fat guys are not in the 1st team.

  25. Anonymous users2024-01-12

    Shift the unit to be culled.

    The rest were regrouped.

    The shift function is:

    1.Schedule follow-up tasks.

    2.Add a unit to a formation.

    3.Deselect one or several units in a formation.

  26. Anonymous users2024-01-11

    It's simple.,Gather your team to 1.,Pull out the unit you want to t.,And then reorganize the rest of the units into the original team.,So that the unit that doesn't want is t out.,Although it's a little troublesome, it's still very popular!

  27. Anonymous users2024-01-10

    If you move it to team 1, press 1--- hold shift to point which pawn (it will disappear from the current team) --Ctrl+1 (regroup).

  28. Anonymous users2024-01-09

    Check, hold shift, click the pawn you want t, you can t go out, just regroup.

  29. Anonymous users2024-01-08

    Hold down the shift and then point the pawn, and it will be T out of this formation.

  30. Anonymous users2024-01-07

    Press shift and click with the mouse on the unit you want to kick.

  31. Anonymous users2024-01-06

    For example, if the pawn is on a team, select team 1, press shift to click on the pawn, and then re-form it, that is, ctrl+1, and remove it.

    What you have to do is not to take the red-blooded soldier out, but to pull him out of the battlefield first, then select the formation, then hold down shift, and just click on the red-blooded soldier to pull him out of the station. Hold down the shift to tap the red blood ice. At this point, he will be excluded from your team at this point.

    Then you are holding down the crrl number. Just regroup. Practicing more can help.

  32. Anonymous users2024-01-05

    What you're going to do is not to get the Red Bloods out, but to pull him out of the fray first.

    Pull out of the battlefield first, then select the formation, then hold down shift, and just point this red-blooded pawn.

  33. Anonymous users2024-01-04

    Pull out of the station. Hold down the shift to tap the red blood ice. At this point, he will be excluded from your team at this point. Then you are holding down the crrl number. Just regroup. Practicing more can help.

  34. Anonymous users2024-01-03

    Pull out of the battlefield first, put up gear + left mouse button, kick out the team, and re-form.

Related questions
10 answers2024-02-08

The next U9 Warcraft Auxiliary Assistant is fully functional and seems to have this feature. >>>More

8 answers2024-02-08

!~!You go and take a look at the major platforms, the most popular is still Warcraft.

9 answers2024-02-08

It's very simple, first of all, you can only type 2 letters to indicate that your previous Chinese characters are not clean. So, you press delete a few more times in the name (find it yourself in the middle of the keyboard) and then it will be back to normal. >>>More

29 answers2024-02-08

Press F11 or press the Alliance button at the top of the screen to come up with a window, point to the box next to the gold or wood symbol, give a few hundred clicks, and then OK (left click to add, right click to subtract, the scroll wheel is faster).

44 answers2024-02-08

No, orbs and orbs (skills: e.g. skeleton arrows, etc.) are not stackable. >>>More