Friends who do machining, please come in, about the contradiction between me and my colleagues, ask

It should be and precious! Harmony makes money! Two defeats hurt others, and watching the excitement is not good for anyone!

This competitive personality will happen somewhere else if it is not changed! If you take the initiative to record his work, I think I believe that people's hearts are flesh and blood, and a few times he will be moved, and he will evaluate your merits to the leader. Harmony is a joy to live with.

I have been working in technical management in a machinery factory for 20 years, and after reading your description, I would like to give you some advice: the matter of the two of you is a trivial matter, and there is no need to keep it in mind; Second, I think your processing technology can be changed, in the lathe can be the outer circle and the inner hole at the same time to process and then cut off, there is no need to separate the processing of the outer circle and the inner hole, so that the efficiency is higher, but also to solve the contradiction caused by your separate processing.

You can report the situation to your boss and ask him to do the next step. If the leader is biased, just quit your job, because it's not interesting for you to stay in such a company.

Oh Actually, I don't feel that necessary, it's not easy for us to work, I think, it's not easy for him, how to say that I've always been worried about the child... You can talk to him when you have time... I'll get off work first, and we'll talk when I have time.

It's easy to do piecework, separate the raw materials, one and a half, and both of you process your own inner hole and outer circle, and then you will get more paid than him. May you put an end to this contradiction as soon as possible.

Wire cutting + milling machine + sinusoidal vice (right piece milling angle).

You didn't make it clear, where you won't get it.

This ** is talking about the programming of the machining center**. With this, programming will be much simpler, I also learn molds, this road is not easy to walk...

It's not interesting that there's no crash track in this industry.

Either come to the coast dry operation.

It's not a very good year either.

There is no prospect for foreign investment, which may not be bad.

What equipment can Magnum buy? Money to buy equipment is dead money! How do I pick up and deliver the goods?

Hire a car again and again. , but also liquidity! the use of liquidity; You won't just take on the job of processing with incoming materials!

That earns less! You have to use working capital to buy materials! Unless your relationship can be credited!

And then there's the order! Now the mechanical processing industry is very difficult to do! I don't know if you have friends or relatives in this area to introduce you to processing work, with an order, this is the first step!

How long to check out after the work! This is an important one! Unless the processing of incoming materials, do not need to enter the material funds, can support the time for a long time, if you feed yourself, do not need 5 months to drag you down, a month to you 20,000 yuan of goods is not much, calculate 20,000 yuan of goods how much profit do you have?

Now is not the era of half of the materials, processing fees, people will be very clear about the processing of the outside including iron sales, I hope you think about it and then invest!

Do you want to do it with friends and friends? You will 5 or 60,000 yuan suggest that you think again. Now that the machinery industry is not very sluggish, you can first examine the market. If you really want to do it, it is recommended that you buy a bench mill and horizontal milling, as well as a larger lathe.

There must be long-term contracted machining parts and the quality of processed parts.

Do you do machining now?

I am also in the machinery industry, mechanical processing is generally not a loss as long as there is work, this expert knows well!

What you can do in a situation with a bad reputation!

Considering the cost of silver is not to think about the iron filings to make up for the electricity bill, the iron filings are not fixed, take it as additional income, this is a concept problem, electricity costs, machine tool wear, tooling fixture wear, consumables (including tools, cutting fluids, etc.), labor, etc. should be counted as costs, and then compare this with the processing fee to see how much you can earn, and then decide!

May you have a good start!

If it is cooperation, it is recommended that there should be a division of labor and focus, for example, what you are mainly responsible for, what he is mainly responsible for, otherwise there will be contradictions because of unclear responsibilities when really cooperating.

In addition, what kind of machining do you refer to, is it a CNC milling machine or a CNC lathe, do you need to buy equipment, machining equipment is generally very expensive, the cheapest is tens of thousands of yuan.

The better knives are also expensive, ranging from tens to hundreds.

In short, you need to have sufficient funds, including the purchase of equipment, the addition of knives, living expenses, utilities, rent, all taking into account. There is also a minimum of two months of working capital, you must first understand your customer payment method, how many days the month is closed, and whether the payment is on time.

Good luck with your pie!

Suzhou Wuzhong District Gangye Machinery Factory.

Main business: precision CNC lathe processing, general lathe processing, wire cutting processing, fixture, fixture and inspection tool design and production, mechanical accessories, CNC tool resistance sales and other businesses.

Hello friends. I hope to satisfy you. First of all, the processing fee is three times the salary, although it is not much, but it is not reasonable.

I don't know if you're **, I'm in Shanghai, where the rent and wages are relatively high, the profit is about 30%, and the general materials are doubled. The salary is three times the first potato, and whether it can be exceeded if the working hours are enough. The model of the knife source is different, and the gag is different.

The cost of hand-searched tools and tooling depends on the quantity, and the batch does not exceed one percent.

You are in**, the red cloud machining network is all dry machining, let's discuss.

Haha, this is very simple, a lot of machining in Henan does not need processing fees, you can leave the iron pin, you can consider.

First of all, the tool fee is different according to the material you are machining, and I don't think there is a suitable calculation formula to apply; For example, the loss of tools in aluminum and steel is completely different. As you said, the loss of knives for two people working for a month should be within 3-500 yuan, and the electricity bill will not exceed 1,000 yuan per month. In addition, the value of the scrap products of the iron sales is not high, so don't expect too much from it.

Finally, I wish you all success in your career!

Basically, there is no problem. Machining mainly depends on the work at hand, and the most important thing is to sharpen the knife. Three-point craft seven-point knife, so it is important to be able to sharpen the knife. Then there is the ability to read pictures. The issues you are talking about have no effect on any of that.

There is no problem, the general machining is not very demanding on the body, and dry turners, millers and the like sometimes need to wear flat glasses. I am also short-sighted.

What can be done is generally to work on drawings. Generally do not speak when working

Big brother, it doesn't matter if you are 1000 degrees myopic or deaf, as long as you have hands and feet, a flexible mind, and can learn the craft, there is no problem.