How to install and use the rat guard?

Installation:1The installation of the anti-rat plate is very simple, first insert the expansion nail into the installation eye on the card slot, and then fix the expansion nail parallel to the wall on both sides of the door frame along the door frame, and the card slot is successfully installed! When using, you can put the anti-rat plate smooth.

The inner diameter of the card slot slides into the card slot to prevent rats from entering! When not in use, take out the anti-rat board, and the card slot fixed on the wall does not affect the normal opening and closing of the door, and does not need to be removed.

2.The height of the card slot is the same as the height of the anti-plate, generally 500mm, and can be customized according to customer requirements 400mm, 450mm or 600mm!! The thickness of the middle anti-board is about 25mm, and the length of the anti-rat plate is determined according to the specific width of the door used!

The thickness of the card slot is about 40 mm, and the width is 30 mm. Each set of rodent plates is equipped with 4 expansion nails required for installation.

Tools Raw materials.

Mouse guard material.

The new aluminum alloy rat guard is used to replace the old rat guard, which is practical, strong, durable and long-lasting. It is made of the main board surface of the mouse flap and the card slot, and the visible part of the appearance is customized with aluminum alloy and a yellow and black reflective warning sticker.

Rodent-proof plate material: This product is customized with high-strength aluminum alloy as a whole, with strong visibility and high practicability! The reflective strip on the upper part is professionally made of engineering-grade reflective film, and the reflective film and adhesive paper are firm and durable.

Usage: Method steps.

1.The new type of rat guard is a kind of scissor rodent guard, which is a device to prevent and block rats from climbing over the mooring line, by the left main wall, the right main wall, and the limiter.

The central axis, the structure of the operation rope is composed, the central axis makes the left main wall, the right main body wall combine into a circle by its own gravity, and the opening and closing of the two main walls are completed by manipulating an operation rope located at the outer edge to change the gravity fulcrum, abandon the powerful defects on the structure of the traditional rat-proof board, have the automatic locking function of the cable, the structure is reasonable, the operation is convenient, the use is reliable, and it is suitable for 6 12 inches of marine cable. The inner diameter can be customized according to customer needs.

2.How to confirm the length data of the rodent-proof plate:

The length of the rat-proof board is determined according to the width of the door used by the customer, and the customer needs to measure the width of the wall on both sides of the door when placing an order, and the data needs to be accurate and the error is 2mm.

3.Surface treatment of rodent-proof panels.

The surface of the rodent-proof board has been treated with anti-corrosion, which is hard and beautiful. The 50mm above the anti-plate is pasted with a yellow and black reflective strip, which can reflect the light under the illumination of lights or other light sources, play a warning role for personnel, and facilitate personnel to enter and exit.

The rat guard is installed on the door frame, and the card slots are installed on both sides of the door frame, which is convenient for the mouse guard to move, and the height is generally 50 cm.

Installation method: The card slots on both sides can be fixed to the door frame parallel to the door frame with rivets, and the mouse stop plate can be slid into the card slot along the inner diameter of the card groove when needed, and the mouse stop plate can be taken out when not in use, which does not affect the normal opening and closing of the door. The rat guard is made of special aluminum alloy material, and the surface of the rat guard is treated with anti-corrosion, which is hard and beautiful.

The rat guard is installed on the door frame, which is convenient and quick to construct and easy to disassemble, which is convenient for handling equipment such as power plants and machine rooms. The upper part of the mouse flap is affixed with reflective strips, which are easy to identify at night and prevent people from tripping. The rat guard can be widely used in power plants, substations, grain depots, gas stations, chemical plants and other units, and the rat guard has played a good role in protecting rodent infestation.

The new aluminum alloy rat guard replaces the old rat guard, which is practical, strong, durable, and long in use.

Summary. Hello features of the mouse guard: 1. Simple installation and disassembly, easy to handle The mouse guard is only composed of the main board surface and the card slot, its installation and disassembly are very simple, and it is not heavy, very convenient to handle.

Second, the wide range of applications of rat baffle in the power industry is more than the application, such as power plants, substations, power distribution rooms, etc., but it can also be used in granaries, warehouses, gas stations and more remote chemical plants, etc., it can be said that more remote places can be applied. 3. The size can be customized arbitrarily, and the mouse guard can be customized according to the customer's requirements.

Dear hello, it is a pleasure to be able to serve you, and more your description of what the mouse flap is doing is as follows.

Hello, what is the rat guard plate used to block rats from entering and destroying indoor instruments or circuits made of aluminum alloy, stainless steel and other materials. The rat guard is mainly used in the power place to block the tool of mice, the rubber sail is mainly the power line once it is destroyed by the rat will pose a great threat to the operation of the power system, the more common is the line short circuit, equipment burned, tripping, etc. Therefore, the beam hail rat guard is very important in power equipment.

Hello, the important silver rolling thing is to say that the two blocking tombs are made of aluminum alloy, stainless steel and other materials, which are used in the power distribution room to block rats from entering and destroying indoor instruments or lines. The rat guard is mainly used in the power place to block the old ruler to answer the rat tool, mainly once the power line is damaged by the rat will cause a great threat to the operation of the power system, the more common is the line short circuit, equipment burned, tripping, etc. Therefore, rat guards are very important in electrical equipment.

Hello features of the mouse guard: 1. Simple installation and disassembly, easy to handle The mouse guard is only composed of the main board surface and the card slot, its installation and disassembly are very simple, and it is not heavy, very convenient to handle. Second, it is widely used Although there are many applications in the power industry, such as power plants, substations, power distribution rooms, etc., it can also be used in granaries, warehouses, gas stations and more remote chemical plants, etc., it can be said that more remote Liangnian places can be applied.

3. The size can be customized arbitrarily, and the rat flap can be customized according to the customer's requirements.

.The new stainless steel rat guard replaces the old rat guard, which is practical, strong, durable and long-lasting. 2.

The new stainless steel rat guard is installed on the door frame, which is convenient and fast for construction, easy to disassemble, and convenient for power plants, machine rooms and other handling equipment. 3.The upper part of the new stainless steel rat flap is pasted with reflective strips, which are easy to identify at night and prevent people from tripping.

4. The height of the new stainless steel rat flap is 50 cm, and the width can be made according to customer requirements. 5.The new stainless steel rat guard can be widely used in power plants, substations, grain depots, gas stations, chemical plants and other units, and the rat guard has played a good role in protecting rodent infestation.

Specifications of the mouse guard: (the height of the mouse guard can be customized).

Specification 1 of the mouse guard [50*80(cm *100(cm *120(cm *150(cm)].

Specification 2 of the mouse guard [60*80(cm *100(cm *120(cm *150(cm)].

Specification 2 of the rat guard [70*80(cm *100(cm *120(cm *150(cm)].

Remarks: The height of the stainless steel rat guard is 56cm, and the length can be customized!

Stainless steel rat guard purchase main matters:

This product is made of high-strength stainless steel rat guard, which should not be hit by heavy objects when used, and should be placed in a safe place and properly kept when not in use. The mouse guard can be removed, and when it is not needed, the mouse guard can be pulled out without affecting the normal use of the door. The length of the mouse guard is determined according to the width of the door when the customer uses it, and the customer needs to measure the width of the wall on both sides of the door when placing an order, and the data needs to be accurate!

The regular height is 50cm cm, and the length can be customized according to the requirements. The rat guard has a stainless steel rat guard, an aluminum alloy rat guard, and a reflective strip is generally pasted above the rat guard.

Mouse guard installation: first insert the expansion nail into the installation eye on the card slot, and then fix the expansion nail parallel to the wall on both sides of the door frame along the door frame, and the card slot will be installed successfully! When in use, the mouse guard can be slid into the card slot along the inner diameter of the card slot, and the mouse guard can be taken out when not in use.

Shijiazhuang Ruineng Power, if you have any questions, please contact me!

Summary. Yes, but you should disconnect the power supply before removing the mouse flap to avoid accidents.

Yes, but you should disconnect the power supply before removing the mouse flap to avoid accidents.

Can you tell us more about that?

It is possible to remove the mouse guard, but before removing the mouse guard, you need to disconnect the power supply to avoid accidents. Reasons for the problem:1

Due to possible damage to the circuit board on the mouse guard, the circuit on the board is disconnected, resulting in the mouse guard not working properly. 2.Due to possible damage to the circuit board on the rat guard, the circuit on the circuit board is disconnected, resulting in the mouse guard not working properly.

Workaround:1Inspect the circuit board on the mouse flap and try to repair or replace the circuit board if you find a damaged circuit.

2.Inspect the connectors on the rat guard, and if you find a damaged one, you can try replacing the connector. Personal Tips:

1.When overhauling the rat guard, be sure to disconnect the power supply to avoid accidents. 2.

When overhauling the rat guard, carefully inspect the circuit board and connectors, and repair or replace them in time if damaged parts are found. 3.When overhauling the rat guard, pay attention to safety to avoid accidents.

1. First insert the expansion nail into the installation eye on the card slot, and then fix the expansion nail parallel to the wall on both sides of the door frame along the door frame, and the card slot will be installed successfully!

2. How to use the mouse guard: When using the mouse guard product, the mouse guard can be slid into the card slot along the inner diameter of the card slot, which plays a role in preventing mice from entering! A person can walk directly over the rat guard.

If the mouse flap is removed when not in use, the card slot fixed on the wall will not affect the normal opening and closing of the door, and it does not need to be removed.