Dopod D9000 flashing, Dopod D600 flashing the whole process

I have SPL unpack fool version plus SD card flash machine ROM You don't need to be on the computer but you can also flash it on the phone, Dopoda D600 normal version (P3400), SPL as long as it is placed in the root directory of widows, the phone will automatically restart Look carefully at the second line in the upper left corner of the boot interface,If it is written,Then it is unlocked。 After booting up, put it in the root directory of the SD card and then turn it off. After turning off, press and hold the camera button and the power button at the same time, hold for a few seconds, and wait for the three-color screen on the phone, and then let go.

There will be a 10-second countdown in the lower left corner, and if you press the power button before that, reading sceond os form sd will appear This is the interface in the flash, don't press other buttons. Wait 5 to 10 minutes for successPress Any Key This is a successful flash, congratulations.

A three-color screen appears after pressing any key.

Poke pp to boot up. OK, that's it!

Brush the machine you have to go to the forum to see more.,It's useless to ask here.,People posted in the forum.,A lot of people have tried.,And then there is a similar problem.,The landlord will help solve it.。

I have a mobile phone for D600. can give you the files to flash your phone.

The Dopod D600 of the card brush, the worst case is bricks if you don't brush it!

What is card swiping: The flashing operation method of flashing ROM files into the mobile phone through the SD card, without connecting to the computer.

Compared with connecting to the computer to flash, the card swiping operation is simple and convenient, and it is also a little safer (not afraid of a sudden power failure during the flashing process, hehe...).

1. Before swiping:

Confirm that your phone SPL is unlocked.

Make sure your phone's battery is above 50% charged.

Confirm that your SD card is in FAT32 format.

Insert the SD card into the memory card slot of the D600.

Second, the specific flashing steps are as follows:

1. Pull out the SIM card --- turn off --- reinstall the battery.

2. Press and hold the camera button and the power button at the same time, and the phone will appear.

checking

sdcontents。

And then it appears. update

sdimage?

And. press

powerkey

At the same time, a 10-second countdown appears in the lower left corner of the screen.

3. Press the power button before the 10-second countdown changes to 0 (it just so happens that this is the on/off button).

The next thing is to wait, please be patient! It may take 5 minutes to 10 minutes.

reading

formsd

This is in the ROM file under the SD card to read.

reading

sceond

osform

SD This is in the flash.

success

pressany

keyThis is the success of the flash,Congratulations。

4. The three-color screen appears after pressing any key.

5. Poke PP to boot up. OK, that's it!

1. You must have Hard-SPL before flashing ROM and Radio2, and the memory card must be a 2G (or below) ordinary card.

3. The memory card must be in FAT32 format;

4. The battery level of the mobile phone is not less than 50%.

Here's how to swipe:

2. Flash hard-spl (if you are sure that you are hard-spl, you can skip this step, take hardspl v7 as an example).

2. Rename hardspl to hardspl;

3. Click to enter the three-color screen;

4. Press the prompt to start flashing the machine crack late posture (about 15 seconds) 3. Brush the ROM

After decompression, extract the RUU file and copy it to the root directory of the memory card.

2. Rename ruu;

3. Click to enter the three-color screen;

4. Click the power button according to the prompts to start flashing (about 120 seconds) Fourth, brush radio (the same method).

After decompression, extract the RUU file and copy it to the root directory of the memory card.

2. Rename ruu;

3. Click to enter the three-color screen;

4. Click the power button as prompted to start flashing (about 60 seconds).

For hard-grid machines, press R+Space. The hard grid is just restored to the factory,,It's what you just flashed into the system,,, and your hard grid steps are not right.。。。 A,Go to the system settings and choose that to empty the storage,,,Then enter 1234 on the line.。。。

Two kinds of ,,, at the same time press and hold the left soft key and the right soft key and then poke PP,,After that, press R,,After that, press the space bar,,, make a backup of the contacts before the hard bar。。。 But I'm going to tell you that flashing and hard grid are two different things... Flashing is rewriting a system,,, rewriting a hard grid to the way it was when you first wrote to the system.