How to edit a recording, how to edit a recording

1. First of all, for users who use Huawei mobile phones, I don't recommend you to use third-party software, because our mobile phones come with a voice recorder function, and we can't uninstall it. Therefore, it is recommended to use the app that comes with the phone. Let's open the utility tool first and find [Audio Recorder].

2. Then, let's create a new recording file as an audio instance. Click the round button below the home page to start or end the recording. Depending on the size of your voice, the system will show the peaks and troughs in the form of images, so during recording, you can pay attention to the volume by changing the pattern.

3. Then, we open the file we just recorded again in the toolbar below, find the [] button, and click to proceed. The software will directly select the *** file, and click the "Add Start Time" button when you hear the beginning part of the file you want to clip, and click the "Add End Time button" when you hear the end of the file you want to clip.

4. Finally, you can select the recording clip you need, in the progress graph above, select through the start line and stop line, and click [Crop] when you are done.

It is recommended to use professional audio editing software for editing. In addition to audio recording, Sound Forge also supports vocal trimming and other editing operations on recording files.

Here's how to edit the recording:Tools Raw Materials: Demo Phone: Huawei P30, System Version: Software Version: Voice Recorder.

1. Turn on the voice recorder on your phone.

2. In the interface of the recorder, click the recording icon to record.

3. When the recording is over, click the recording pause icon.

4. Open the recorded recording file, and you can see the following clip icons, such as to convert text, etc.

5. If you click, you will enter the recording interface, where we can drag the recording progress bar to edit the length of the recording at will.

Recordings are generally long, and what is really needed may be a part of the content. So, we can use tools to cut out what we don't need, so how do we do that? Many of you don't know how to use audio editing tools, so you spend time listening to a whole audio file.

It is recommended that you learn the audio editing method appropriately, after all, it is not too difficult to operate, and many software can solve it quickly.

The following takes the recording and editing as an example to share the detailed operation methods, I hope it can help you!

Operation introduction: 1. Open the audio editing software on the computer, and then upload the audio file here;

<>3. The operation is relatively simple, use the mouse to select the clip, and click "Cut" in the upper right corner to delete the content just selected;

Fourth, after processing, the black line represents the position just processed, and the rest of the content continues to operate;

5. Finally, click "Export" in the upper right corner;

6. After the export is completed, set the file name, format and output directory in the following pop-up window, and click "OK".

7. After the export is completed, go to the location where the file is located to browse the file!

Phone recording clips. Tools: vivo v1911a, funtouch os9, native.

1. Open the voice recorder that comes with your phone and click on the list.

2. Click on the recording file you want.

3. Click the three-dot icon in the upper right corner first, and then click Crop Recording in the pop-up menu at the bottom.

4. Drag the buttons on both sides of the audio timeline to the position you want to capture.

5. Click the crop icon, and finally click Done.

First of all, save the file you want to cut and cut the recording file on the computer, and then edit the clip through the software of Format Factory, the specific operation steps are as follows:

1. First of all, open the format factory software on your phone.

3. Then click [Add File].

4. After adding the file, click [Edit].

5. Then determine the [Start Time] and [End Time] of the recording material you want to capture.

6. After the time is finally determined, click [OK] on the page to cut the recording.

For example, Fengyun Audio Processing Master or Jianying can cut the recording.

There are a variety of supplementary template types, such as blockbusters, card points, food, cute babies, and creative gameplay.

The template effect is cool, and celebrities love to use it.

The course content covers a variety of topics such as script conception, shooting, editing, color grading, and account operation. From beginners, creative advancements to high-level gods, a large number of courses meet the demands of users at different stages.

Some courses support users to learn while cutting, and improve the user's learning effectiveness through real-time practical operation.

Product Briefing Voice.

2. Here you can see all the recording files in your phone, and select the files you want to cut.

3Click on the three dots in the upper right corner and select the "Clip" option.

4Drag the cursor to the part you want to clip and click "Clip".

5. Select the editing method you need, and select "Extract Selected Area" by default.

6. Click the "Finish" button to finish the recording and editing.

Hope it can help you and have a happy life! Thank you!

Save the recording file you want to cut on your computer.

After opening the software, tap on the audio clip feature.

Add the audio you want to cut into the software, click Add File, and open the audio from inside the software.

Modify the output directory to set whether the cut audio is the original directory output or custom.

Select the audio segment that needs to be cut.

After you have cut all the audio that needs to be cut, click Start Processing, and when the cutting is complete, click Open File to view.

Here are the results.

The first step is to drag the audio file to the dotted box or click the "Add File" button at the top left to add **.

Step 3: Click "Insert Audio" and click OK after the pop-up window adds the audio you need to insert.

Fourth, you can set the audio effect in the lower right corner of the interface, including: "fade in", "shallow out" and "remove mute", and click the "Custom" button in the "output directory" to set the storage location after the setting is completed.

Step 5: Click "Export" and wait for the export to be successful.

1.We open the audio recorder software that comes with the phone, and then click on the record.

2.When you're done recording, tap Done, then enter a name that you remember and click OK.

3.Then install the software in Figure 1 and open it, and click Crop on the software.

5.Click in the upper right corner and adjust the white slider here in Figure 2 to select the clip of the audio that needs to be trimmed.

6.Click on the scissor symbol below after you have finished choosing, and then see the prompt of success in Figure 2, which means that the trim has been successful. Click Save and enter your name.

Follow my action, it's easy and free.

Not only does it cancel noise, but it also splits and synthesizes audio for free! When splitting the audio, it can be customized or divided into fixed hours, half an hour, and most importantly, free.

Click Add Audio, then click Start Splitting, wait for a while, then you can click Save Result, and the recording cutting function is completed.

Clipping audio can be done this way.

The first step is to add the audio that needs to be edited.

Step 2, Clip, Cut, Copy, Paste, Insert Audio The third step is to set the effect of the audio.

Fourth, the audio is not suitable and can be undone and redone.

The fifth step is to customize the audio location after making it easy to find.

Step 6, and finally click on Export.

Fengyun Audio Processing Master is a professional and comprehensive audio processing software, supporting audio cutting, audio conversion, audio merging, audio extraction, audio speed change, volume adjustment and noise cancellation and other practical functions, combined with these functions can fully meet your needs in all aspects of audio processing.

How do I edit a recording?

Do it all with Format Factory!

1) Capture: Open the format factory, click "Audio" on the left, select "All Go to WMA" (the file format of the general recording is WMA) Add files to intercept the clip, and then follow the prompts to do it.

2) Merge: Open the format factory, click "Advanced" on the left, select "Audio Merge" Add files (add the captured files in order) Click "Output Configuration" above, select the output format OK. Then follow the prompts to do it.

Open the main interface of Fengyun Audio Processing Master, there are many options, we click on the main interface"Audio clips"Options.

4.After importing the audio file, pull the audio progress bar, select the audio segment that needs to be cut, and click it"Confirm and add to the output list"

5.Then click"Start the conversion"

6.When you're done, the status changes to Cut, click on it"Open the file"to open the *** file you just converted.

Click the [Audio Cropping] function on the homepage.

Then check the audio files you want to clip and click OK.

Then we can select the audio segment that needs to be trimmed, and click Start to generate after the cropping is completed.

How to cut recordings can be done with Cool Edit or AODOBE Audition. It's best to use the previous one, which can be used by ordinary people. Tutorials can go to my place to watch and learn... Search on the Internet, there is *** cutting tool.

Audio effects.

Audio can make the sound icing on the cake, audio effects and MIDI effects are essentially the same, there are many types of audio effects, such as singing in KTV, the voice has echo and reverberation effects after passing through the microphone, which is the effect of delay effects. There are also chorus effects, which can move a musical instrument or a person's voice from side to side to create a reverberating chorus effect.

The hoarse and desolate electric guitar sound often heard in rock music is generally made with distorted audio. The audio can be applied directly to the waveform file.

To clip an audio file, you can use the following methods.

1. Add the audio you want.

2. Yes to start pulling with a blue dotted line, the shaded part is part 3, yes, cut, copy and paste audio, you can set the audio effect 4, the audio is appropriate, you can cancel and redo.

6. Finally, click Export.

Cutting audio files can be done through the software of Format Factory, which is a computer software, and the specific operation steps are as follows:

1. First of all, click the audio format that needs to be cut at the bottom of the page on the main interface of the format factory, here [APE] is taken as an example.

2. Then click [Add File].

3. After entering the page to add a file, then select the file, and then click [Open].

4. Next, click [Edit] on the page.

5. Then select the start time and end time of the clip on the operation page of the clip.

6. Finally, click the [OK] button at the top of the page to realize the requirements of cutting the audio file.

Clip audio with Aidution - add, remove, replace.

Clipping Audio Steps:

1. First open the audio editing tool, click Add File in the editing interface, and import the required file.

2. Drag the mouse to select the clip area, the shadow overlay is removed, click the [Clip] button, click Export, and finally click the three dots icon, select Open Directory, and view the clip file.

Here's how:Tools Raw Materials: Demo Phone: Huawei P30, System Version: Software Version: Voice Recorder.

1. Turn on the voice recorder on your phone.

2. In the interface of the recorder, click the recording icon to record.

3. After the recording is over, click the Zhiqiao pause icon of the recording chain.

4. Open the recorded recording file, and you can see the clip icon below, such as converting text, etc.

5. If you click it, you will enter the recording interface, where we can drag the recording progress bar to edit the recording length of the studio key at will.

How to cut the recording clip with a mobile phone?Let's take a look.

1. Turn on the mobile phone recording function and record a sound.

2. After recording, enter the name and click Save.

4. Open the editing software and select the cutting function.

5. After selecting the **Cut function, click the file browser to find the recording you just saved.

6. After opening the recording, you can edit the recording according to your needs, and then click the icon in the upper right corner.

7. Finally, enter the name and save it.