How to paste wall stickers, how to stick wall stickers

to the version.

It also depends on what software you use to build the mold.

Some of them can be pasted in the modeling software.

You can't even tell me clearly.

How to paste wallpaper? What do you need to pay attention to in the process of pasting wallpaper for home decoration? There are usually two kinds of home decoration wallpaper, paper and plastic, there are also differences in the adhesive part, it is best to use the "self-adhesive adhesive" in the quiet hole, but it is not convenient to modify, there is a little difficulty in pasting, the other is to quietly flush the wallpaper without adhesive, you need to paint paste on the back, it is difficult but the choice of materials is more, let's introduce the pasting process of this wallpaper.

How to paste wallpaper? The pasting process is as follows:

1. Eliminate old wallpaper.

1. Pour the wallpaper remover into the spray canister and spray it on the old wall.

2. Use a blade to scrape a few cut marks on the wall to make it easy for the wallpaper remover to penetrate.

3. After about 3 minutes, scrape off the old wallpaper with a wallpaper removal knife.

2. Paste the new wallpaper.

1. Dilute the wallpaper glue slowly with water.

2. Adjust to an appropriate concentration.

3. After evenly applying the adhesive to the wallpaper with a rubber brush, fold it in half in an S shape and leave it for 10 minutes.

4. Pay attention to whether the pattern is correct when pasting wallpaper.

5. Then use a flat brush to brush flat, pay attention to the top of the wall should be reserved 3-5 cm when posting, so as to facilitate adjustment.

6. Level again with a plastic scraper.

7.Flatten the seam with rollers.

8. After the adhesive is dry, cut off the excess with a blade.

The secret of perfect construction: clean the wall surface when pasting the new wallpaper, and tear off the old wallpaper, as for the paint surface, it should be repaired first. Since the wallpaper is in the shape of a long strip, when applying wallpaper glue, Xuan folds the wallpaper in an S shape while applying it to save space.

When pasting wallpaper, it should be from top to bottom, and the left and right directions should also be consistent, step by step.

Click** to learn more The wallpaper that does not belong to the flower overlaps about 1-2 cm at the overlap of each long piece of wallpaper, and the wallpaper that does not have flowers must be adjusted according to the prohibition of the color. When pasting wallpaper, there is a switch cover treatment method on the wall: the wall is still flattened first, and then cut along the outer frame of the switch cover with a utility knife after the full paste, if the wall is very uneven, it is recommended to add a layer of lining paper before the sticker, but it is not absolutely necessary.

Click** to learn more How to deal with small bubbles: Now the pasting of wallpaper is relatively simple and smooth, and the pasting process does not agree to produce bubbles, but if the bubbles are really effective, it is not difficult to solve, and the bubbles can be pierced with a hole with a needle to expel the gas.

If you love beauty, you should also have the habit of decorating your home beautifully. I believe that wall beautification is also an indispensable step for you, so do you know how to paste wallpaper? Any idea of how it works? Let's find out more below!

First of all, the tools used to paste wallpaper include: glue, brushes, towels, sponges, sandpaper, cutters, scrapers, tape measures, glue containers, etc.

Secondly, the method of pasting the wallpaper:

1. Wall treatment: use a scraper to scrape the impurities on the wall, scrape the uneven wall, and fill the gaps with gypsum powder. If the wall is soft or has a powder layer and has been swept with latex paint, the wallpaper base film should be painted once to make the wall firm, so that the wallpaper will not fall off and the limbs will not fall off.

2. Cutting wallpaper: first measure the height and width of the wall, and cut 5 to 8 cm of the flower wallpaper according to the height of the wall, as the upper line trimming, and the symmetry of the pattern needs to be considered for the flower wallpaper, so the cutting length should be increased according to the situation, usually lengthened to 8 to 10 cm.

3. Coating glue: the wallpaper glue is painted on the back of the cut wallpaper, special attention should be paid to the surrounding edges to be coated with glue to ensure the quality of construction, the painted wallpaper, the glue is folded and placed for 5 10 minutes (note, no external force shall be applied, so as not to crease the wallpaper, especially non-woven fabric), so that the glue can be posted after completely penetrating the bottom of the paper, and several pieces of wallpaper are painted each time, and posted in order. 4. Wallpaper construction:

Generally, the first wallpaper is posted from top to bottom by the door or in the dark corner, and the wallpaper is gently scraped with a scraper from top to bottom, from the inside to the outside, and the bubbles and excess glue are squeezed out. Make the wallpaper flat and close to the wall.

5. Trimming and cleaning: cut off the excess wallpaper at both ends, the knife edge should be sharp to avoid burrs, and then use a sponge to wipe the glue remaining on the surface of the wallpaper completely clean, so as not to turn the wallpaper yellow, after the wallpaper is dry, if you find that there are bubbles on the surface, cut it with a knife and inject the glue and then flatten it to eliminate.

Finally, how to paste the wall cloth:

1. Since the wall cloth itself will absorb water, an appropriate amount of white glue should be added to the glue to increase the adhesion.

2. Do not use a hard scraper, scratch the cloth and the surface, it is best to use a soft brush.

3. If there is glue overflow, use a sponge to suck it out, so as not to damage the cloth surface early.

If you have any other questions about this, you are welcome to log in to Fuwo Home Furnishing Network to inquire about the latest relevant information, and I hope that the content we provide can bring some help to the decoration of your home.

1. First of all, you must clean the wall before pasting, keep the wall flat, and you can scrape off the uneven places with a shovel.

2. Clean the dust after scraping and use a brush to brush off the dust on the wall. Remove the dust and wash it off with water, then wait for the wall to dry.

3. Use a ruler to measure the length and width of the paste. Prepare the scissors and cut them according to the size of the volume. Tear the film from the bottom paper, pull the film with one hand, and the other side is best to be fixed.

4. Paste it on the wall, start from top to bottom, and if there is a bubble in the middle, puncture it with a needle to squeeze out the air.

Now wallpaper is a more popular interior decoration material, more and more people want to paste it themselves, butCan you paste the wallpaper yourself?Of course, you can, the following will share five steps to put your own wallpaper, you can put a beautiful wallpaper in an orderly manner, and add points to the interior space.

Step 1: Wall treatment.

Use a scraper and sandpaper to remove impurities floating on the surface of the wall, and fill the cracks in the cavities with gypsum powder. If the texture of the wall is soft or there is a layer of dust, you must first use wallpaper glue to make the wall strong so that the wallpaper will not fall off.

Step 2: Cut the wallpaper.

1. After leveling the wall, measure the length and width of the wall.

2. Calculate the wallpaper according to the wall area. Please note that the wallpaper must be 5 cm longer than the bottom wall in order to be trimmed.

3. For floral wallpaper, the symmetry of the good stool of the pattern should be considered, so the cutting length should be appropriately increased according to the unit length of the repeated pattern.

The third step is to scrape the putty and brush the base film.

Brush the base film, evenly brush the base film on the wall, the thickness is moderate; Putty grinding. Scrape putty twice on the wall. After the putty is dried, grind it on the wall with sandpaper to polish the uneven wall surface to make the wall surface smooth; Apply the base film evenly to the surface of the wall, and it does not need to be too thick.

This prevents the wall from absorbing the wallpaper glue, which makes the wallpaper stick to the wall and make the wall flatter.

The fourth step is to put a vertical or horizontal line.

First of all, the inner corners of the north side of the interior are arranged according to the width of the wallpaper, the parts of the male corners must be wrapped, the yin corners must be superimposed, and right-angled lines or flat lines are arranged according to the width as the baseline for pasting the wallpaper.

Step 5 of household sticker wallpaper: bubble treatment.

If you find bubbles on the surface of the wallpaper after it is dry, cut the wallpaper with a knife and inject glue, and then flatten the wallpaper to remove it.

You can get it for free

The application of wallpaper is becoming more and more popular in our lives, and it is also easy to change when it is beautiful. It is gradually being loved by consumers. But you may not know much about the pasting of wallpapers, so let Tuba Rabbit take you to see the sticking tips and related precautions for wallpapers!

Wallpaper pasting tips and precautions.

1. Wall treatment: scrape off the impurities on the wall with a scraper to make the concave and convex surface smooth and flat, and fill the gaps with gypsum powder. If the wall texture is soft or has a powder layer and latex paint is swept over, the wallpaper base film should be used once to make the wall stand firm and the wallpaper will not come off.

2. Cut the wallpaper: first measure the height of the wall, and reduce the height of the wallpaper by 5 to 8 cm according to the height of the wall, as the upper line trimming, the flower wallpaper needs to consider the symmetry of the pattern, so the cutting length should be followed and increased, it is usually extended to 8 to 10 cm.

3. Brush glue: apply wallpaper glue on the back of the wallpaper, pay special attention to the surrounding edges to glue to ensure the quality of construction, coated wallpaper, glued surface folded for 5-10 minutes (note that there is no base on the outside The force should be applied to avoid the folding edge marks in the wallpaper, especially non-woven fabrics. Once the glue has completely penetrated into the paper, it is ready to be posted, applying several wallpapers each time and in order.

4. Wallpaper structure: Generally the first wallpaper is pasted from the top to the bottom or the corner of the door. Using a scraper, from top to bottom, inside to out, gently scrape off the wallpaper and squeeze out air bubbles and excess glue. Liquid. Make the wallpaper against the wall.

5. Trim and clean: Cut off the excess wallpaper at the upper and lower ends, the blade should be sharp to avoid burrs, and then use a sponge to completely dip the glue on the surface of the wallpaper to avoid yellow wallpaper. After the wallpaper has dried, if there are air bubbles on the surface, you can use a knife to cut the injection glue and then flatten it to eliminate it.

Wallpaper pasting tips and precautions.

Precautions:

1. Before pasting, you should carefully check the wallpaper color and avoid bouquet wallpaper stickers.

2. The quality of the glue directly affects the overall effect and practical life of the wallpaper, and ordinary glue or wall glue powder should be used when purchasing.

3, Glue is mainly used for wallpaper, cross cloth and non-woven wallcovering, don't glue.

4. The concentration of glue mixing is judged according to whether the chopsticks can stand in the glue.

5。When constructing the wallpaper, you should not use force to scratch or wipe the glue on the surface of the paper to avoid contaminating the surface of the wallpaper.

Beautiful wallpaper patterns are very popular among all of us, but if they are not good, they can affect the look. Please paste it carefully. I'm sure everyone will have a more or less understanding of the above, and I hope this article can help you.

You can get it for free

1. Prepare scissors, knives, and plastic cards, and cut off as many blank waste edges as possible along the perimeter of the pattern, so that it is easier to paste.

2. Spread the transfer film onto the pattern to be pasted.

3. Use the bank card to scrape the patterned part repeatedly a few times to make the transfer film stick to the pattern.

4. Gently tear off the bottom paper with the transfer film pattern, and gently pick the non-sticky place with the help of a knife, and the large-area pattern can be reversed, tear the bottom paper with one hand, and press the pattern lightly with the other hand to separate the pattern from the bottom paper.

5. Draw the baby with the transfer film on the wall of the medicine sticker, determine the position to be posted, and it is more difficult to remove the pattern after pasting it on the wall, so use a corner of the transfer film without a pattern to set the position before pasting, and then slowly stick it.

6. When pasting, one hand carries the high pattern, one hand pushes in one direction, and the baby is pasted on the wall, and then the pattern is scraped flat repeatedly with a bank card from the center to the periphery, so that the baby and the wall are well glued.

7. Gently remove the transfer film with both hands, take it off slowly, and try to tear the transfer film as slowly as possible to avoid tearing the baby.

Select **, right-click, and select Set as Background Pattern. OK.