How to disassemble the headlight assembly of a car? How to disassemble the headlight assembly

The headlamp assembly is disassembled and replaced as follows

1. After opening the hood, in the internal test of the two headlights, there is an iron hook, and on the back of the headlights, there is a plastic screw used to lock the headlights, unscrew the two plastic screws behind the headlights, store them, and then pull the iron hook outward to the end, and the headlights will naturally come out.

2. After the headlight is unloaded, you will find that the back is dragged by the wiring harness of the headlight, the headlight wiring harness is fixed by the card, touch the bottom of the joint with your hand, you can find the button, and press it to exit the wiring harness.

3. After removing the headlights, observe the base of the headlights and their fixed methods, the fixed guide rail in the middle is used to slide in or out of the headlights, and the iron hook on the right is the locking device, pull out and release the headlights, and lock the headlights when you push them in.

4. After unplugging the wiring harness, the headlights of the car have always come down.

Some cars are actually bolted or screwed to the body, which varies from model to model. Generally speaking, when you open the hood, you can see one, and then you have to remove the bumper.

You can see the connection to the fenders.

on the screws, so that you can remove it. Pay attention to protect the headlight wiring harness.

Most manufacturers design fully enclosed, and a small number of luxury car headlight covers have electric switches to open automatically, but the general car can't be opened, and the only way is to smash it open.

Hello, car headlight assembly generally has. 2 to 4 fixing bolts. There are generally two parts on the upper side of the vehicle, or the lower side of the vehicle.

There will be one or two hidden inside the bumper. Once found, unplug the connector at the back. Remove the fixing bolt and there may be a plastic clip inside to fix it, and then gently push it outward, you can remove it, I hope mine can help you.

The disassembly steps of the automobile headlamp assembly are described in detail

1.When replacing the headlight bulb of the car, the first thing is to confirm the bulb plug of the car, and buy the bulb of the corresponding socket to replace, the replacement bulb does not necessarily need the original accessories, as long as the bulb is fixed. Unplug the power socket of the bulb, and when unplugging the power socket of the bulb, the force should be moderate and avoid using the socket.

2.After unplugging the power connector, remove the waterproof cover behind the bulb, the material of the waterproof cover of the lamp is mostly soft rubber, and there are also models equipped with a waterproof cover made of soft plastic, which makes no difference, only a little force.

3.Take the bulb out of the reflector and take.

The steps to disassemble the headlight assembly of the car are as follows:

1. Open the cover and jack up the cover with a strut;

2. Remove the negative pole pile head of the battery;

3. Unplug the headlights;

4. Remove the front middle net;

5. Remove the front bumper;

6. Remove the headlight assembly.

How to replace the headlight assembly:

1. After opening the hood, in the internal test of the two headlights, there is an iron hook, behind the headlights, there is a plastic screw used to lock the headlights, unscrew the two plastic screws behind the headlights, store them, and then pull the iron hook outward to the end, and the headlights will naturally come out;

2. After the headlights are unloaded, you will find that the back is dragged by the wiring harness of the headlights, the headlight wiring harness is fixed by the bayonet, touch the bottom of the joint by hand, you can find the button, press it to exit the wiring harness, pay attention not to use brute force, it may pull the broken line, it is easy to take it out after groping, and the silver dress is similar to the power interface in the computer;

3. After removing the headlights, find a safe place to put them, so that you can observe the base of the headlights and their fixing methods, the fixed guide rail in the middle is used to slide in or out of the headlights, the iron hook on the right is a locking device, pull out to release the headlights, and lock the headlights when you push them in;

4. After unplugging the wiring harness, the headlights of the car have always come down to the game.

1. After opening the engine compartment cover, you can see the headlight assembly.

2. Put the car headlights.

The circuit connector is disconnected, and then the fixing screw of the car headlamp assembly is removed with a sleeve, and finally the car headlamp assembly can be taken out after the fixing screw is removed. After the car headlamp assembly is disassembled, it must be handled gently to prevent scratching the headlights.

The disassembly steps of the automobile headlamp assembly are described in detail

1. Replace the headlights of the car.

When the bulb is the first thing you need to confirm the bulb plug of the car, you need to buy the bulb with the corresponding socket to replace, the replacement bulb does not necessarily need the original accessories, as long as the bulb is fixed. Unplug the power socket of the bulb, and when unplugging the power socket of the bulb, the force should be moderate to avoid loosening the socket wiring or damaging the bulb plug.

2. After unplugging the power interface, remove the waterproof cover behind the bulb, the material of the waterproof cover of the lamp is mostly soft rubber, and there is no difference between the waterproof cover and the soft plastic material is also equipped.

3. Take the bulb out of the reflector, and when you take out the bulb, you need to pinch the wire circlip on both sides with your fingers.

When the bulb is released, pull it out. Place the new bulb in the reflector and align it with the fixed slots on the bulb base.

5. During installation, reverse operation according to the steps of taking out the old bulb: pinch the wire circlip and insert the bulb into the reflector, and release the circlip to fix the bulb after aligning the installation position. When closing the waterproof cover, make sure that the edges of the waterproof cover and the fixed position fit perfectly.

Finally, connect the headlight power socket and the replacement of the lamp is complete.

Eldest brother... If you are not professional, it is best not to disassemble it yourself, the headlight assembly is still more complicated, and it is best to go to the repair station or 4S shop

If you really want to tear it down yourself, you'll regret it!

It can't be dismantled without tools, there must be an oven, a baking gun, a lamp removal tool, AB glue, wire strippers and so on. It's better to be a professional, or there will be no problems. For example: water seepage,

Is it removed from the car? Or decompose? Do you want more? If you plan to change the headlights, it's very simple, brick, hold it high above your head, aim at the target, smash it hard, OK!

The parts of the car will not never break, so when some small places are broken, we can repair these places by ourselves, today we will bring you how to disassemble the car headlights**, come and learn together.

How to disassemble car headlights**-Ready.

First of all, the vehicle should be turned off for more than 5 minutes, unplug the car key, wait for the engine to cool down completely, and then open the engine compartment cover to avoid burning the parts. After opening the engine compartment cover, you can see the dust cover behind the headlight assembly, the dust cover is mostly made of rubber, and it can be unscrewed directly along the direction of the screw mouth (some models can be directly cut off), and it does not require too much effort, and then you can see the bulb base in the headlight assembly, pinch the steel wire circlip next to the base, and you can take out the bulb after the clip is released.

How to disassemble the headlights of the car**-**.

How it works:

1.Unplug the power socket of the bulb: first of all, the vehicle should be turned off for more than 5 minutes, unplug the car key, wait for the engine to cool down completely, and then open the engine compartment cover to avoid burning the parts.

After opening the engine compartment cover, you can see the dust cover behind the headlight assembly, the dust cover is mostly made of rubber, and it can be unscrewed directly along the direction of the screw mouth (some models can be directly cut off), and it does not require too much effort, and then you can see the bulb base in the headlight assembly, pinch the steel wire circlip next to the base, and you can take out the bulb after the clip is released.

2.After unplugging the power connector, remove the waterproof cover on the back of the bulb.

3.Remove the bulb from the reflector. Bulbs are generally held in place by wire circlips, and some models also have a plastic base.

4.Put the new bulb into the reflector, align it with the fixed clamp position of the bulb, pinch the wire circlips on both sides and push it in, and fix the new bulb in the reflector.

5.Reclose the waterproof cover, plug in the bulb and the replacement is complete.

The model is different, the dismantling method is different, for example, the German car wants to remove the front bar, and the American car can directly dismantle the lights, mainly to determine what kind of car it is.

First remove the wiring harness, some dismantle the bulb, remove the wiring harness of the integrated headlight, and then remove the fixing screws, which is very simple.

Depending on the situation, in the first case, the front bumper must be disassembled before the headlights (4 screws) can be removed, with 2 screws on the top of the headlights, 1 screw on the side, and 1 screw on the bottom. In the second case, directly disassemble the headlamp (3-4 screws), 2 screws on the top of the lamp, and 1 or 2 screws on the inside of the lamp.

Hello, do you want to install angel lights or change the bulb, change the bulb directly remove the headlights from the car, the general are buckled, the buckle can be pulled out, there are also screws, depending on what model you have, if you want to remove the headlight shell, take a high-power hair dryer to blow the buckle of the soft shell, I hope it will help you.

Hello 1Unscrew the lampshade. Please note that depending on the model, the method of removing the lampshade may vary slightly;

Unplug the lamp holder firmly with the power cord. When pulling out, please pay attention to grasp the bulb with your hands to avoid damage;

Release the lampholder spring to remove the lamp and reinstall the new bulb. The process of reassembling is the reverse order of disassembly, and when reinstalling the dust cover, be sure to tighten it tightly to prevent the headlights from being invaded by rain and dust.

Depending on the model, the method of dismantling is also different, some cars are relatively simple and can be removed without removing the bumper, but most cars have to remove the bumper to remove the headlights, you can first see where the headlights are fixed, and then start to dismantle.

To remove the bumper first, then remove the fixing screws, and finally take the lamp, it is still a little troublesome, you can find the forum essence area There are posts dedicated to changing the lights.

The specific operation steps for installing the headlight bulb are as follows:

1. Open the hood of the car and find the light bulb.

2. Pull out the bulb power cord of the blue coil forcefully, the blue circle is the lamp holder, this lamp holder, slightly harder. Pull it out directly, revealing the tail of the lamp, and the metal handle in the red circle is the handle that loosens the metal clip of the bulb.

3. Pull out the lamp holder first, and then release the handle of the metal clip of the bulb. Then press down in the direction of the blue arrow, don't let go, and then push to the right, you can loosen the light clip, and pull out the bulb directly after loosening.

4. Open the newly bought bulb box, note: be sure to wear gloves to hold the bulb, can not leave fingerprints on the bulb, after leaving fingerprints, the bulb will heat unevenly, affecting the life of the bulb.

5. Install the new bulb into it, then snap on the bulb clip, plug in the bulb power cord, and the installation is successful.

1. Stick your fingers in, follow the red arrow, pinch the joint vertically and pull it out, slowly exert force, don't use brute force, don't dare to use force.

2. After unplugging, tear off the dustproof rubber cover pointed by the green arrow.

3. The bulb cannot be pulled out directly, and you need to press and hold the 2 fixing rings in the red circle to the purple arrow.

Pay attention to the direction of the bulb and keep it consistent with the original car, otherwise it will not be installed. After changing the number, insert the bulb back, install the rubber cover, and plug in the interface.

The rubber cover can be pulled out directly with a little force, and it is not so easy to break.

It is recommended that the headlights of the car should be disassembled in a professional repair shop, which is relatively more reliable, so refer to it.

It is more convenient if the headlights are removed. You can remove it from the closed beta by opening the hood, and it is better to go to a professional store.

Hello, if you want to disassemble the headlights, it is recommended that you go to the shop and let the maintenance personnel disassemble it for you, they are more professional.

Car headlights generally need to be removed from the rear, this is relatively simple, it is recommended to go to the auto repair shop to operate.